You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
35d4a3e29f | 2 years ago | |
---|---|---|
.. | ||
test | 2 years ago | |
ArcherMR200v4.dts | 2 years ago | |
Compiling.md | 2 years ago | |
ReadMe.md | 2 years ago | |
back_to_TPlink_tp_recovery.bin | 3 years ago | |
config | 2 years ago | |
openwrt_19.07.8_tp_recovery.bin | 2 years ago |
ReadMe.md
Openwrt 19.07.8 image for TP-Link MR200v4
Install via TFTP. Rename openwrt_19.07.8_tp_recovery.bin to tp_recovery.bin. Copy tp_recovery.bin to TFTP directory.
TFTP server IP address 192.168.0.225 netmask 255.255.255.0. Turn off all firewalls.
- Power off router
- Connect router to your TFTP server
- Press WPS/RESET while you power on router, keep pressed for 10s
- TFTP loading should now start
- Wait until router has restarted
- Log in with browser to 192.168.1.1
After succcess full installation you need to add your wwan interface.
- Network - interfaces
- Add new interface
- Name: wwan
Protocol: QMI Cellular
-Create interface - General Settings -
Modem device: /dev/cdc-wdm0
Add your APN settings - Advanced Settings - Modem timeout: 20
- Firewall Settings - Create / Assign firewall-zon
-Save
-Save & Apply
Log in via ssh and add dhcp = 0 to your wwan configuration.
uci show network
uci set network.wwan.dhcp=0
uci commit network
Restart your wwan interface
You can revert back to TP-Link firmware with back_to_TPlink_tp_recovery.bin. It´s based on Archer MR200(EU)_V4_210201.