updated nvim config

init.lua

@@ -91,7 +91,7 @@ vim.g.mapleader = ' '
 vim.g.maplocalleader = ' '
 
 -- Set to true if you have a Nerd Font installed
-vim.g.have_nerd_font = false
+vim.g.have_nerd_font = true
 
 -- [[ Setting options ]]
 -- See `:help vim.opt`
@@ -102,7 +102,8 @@ vim.g.have_nerd_font = false
 vim.opt.number = true
 -- You can also add relative line numbers, to help with jumping.
 --  Experiment for yourself to see if you like it!
--- vim.opt.relativenumber = true
+vim.opt.relativenumber = true
+vim.opt.wrap = false
 
 -- Enable mouse mode, can be useful for resizing splits for example!
 vim.opt.mouse = 'a'
@@ -152,7 +153,7 @@ vim.opt.inccommand = 'split'
 vim.opt.cursorline = true
 
 -- Minimal number of screen lines to keep above and below the cursor.
-vim.opt.scrolloff = 10
+vim.opt.scrolloff = 13
 
 -- [[ Basic Keymaps ]]
 --  See `:help vim.keymap.set()`
@@ -176,19 +177,24 @@ vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagn
 vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
 
 -- TIP: Disable arrow keys in normal mode
--- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
--- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
--- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
--- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
+vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
+vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
+vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
+
+vim.keymap.set('i', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+vim.keymap.set('i', '<right>', '<cmd>echo "Use l to move!!"<CR>')
+vim.keymap.set('i', '<up>', '<cmd>echo "Use k to move!!"<CR>')
+vim.keymap.set('i', '<down>', '<cmd>echo "Use j to move!!"<CR>')
 
 -- Keybinds to make split navigation easier.
 --  Use CTRL+<hjkl> to switch between windows
 --
 --  See `:help wincmd` for a list of all window commands
-vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
-vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
-vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
-vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
+--vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
+--vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
+--vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
+--vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
 
 -- [[ Basic Autocommands ]]
 --  See `:help lua-guide-autocommands`
@@ -538,17 +544,17 @@ require('lazy').setup({
       --  - settings (table): Override the default settings passed when initializing the server.
       --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
       local servers = {
-        -- clangd = {},
-        -- gopls = {},
-        -- pyright = {},
-        -- rust_analyzer = {},
+        clangd = {},
+        gopls = {},
+        pyright = {},
+        rust_analyzer = {},
         -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
         --
         -- Some languages (like typescript) have entire language plugins that can be useful:
         --    https://github.com/pmizio/typescript-tools.nvim
         --
         -- But for many setups, the LSP (`tsserver`) will work just fine
-        -- tsserver = {},
+        tsserver = {},
         --
 
         lua_ls = {
@@ -626,11 +632,11 @@ require('lazy').setup({
       formatters_by_ft = {
         lua = { 'stylua' },
         -- Conform can also run multiple formatters sequentially
-        -- python = { "isort", "black" },
+        python = { 'isort', 'black' },
         --
         -- You can use a sub-list to tell conform to run *until* a formatter
         -- is found.
-        -- javascript = { { "prettierd", "prettier" } },
+        javascript = { { 'prettierd', 'prettier' } },
       },
     },
   },
@@ -839,15 +845,15 @@ require('lazy').setup({
   --  Uncomment any of the lines below to enable them (you will need to restart nvim).
   --
   -- require 'kickstart.plugins.debug',
-  -- require 'kickstart.plugins.indent_line',
-  -- require 'kickstart.plugins.lint',
+  require 'kickstart.plugins.indent_line',
+  require 'kickstart.plugins.lint',
 
   -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
   --    This is the easiest way to modularize your config.
   --
   --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
   --    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
-  -- { import = 'custom.plugins' },
+  { import = 'custom.plugins' },
 }, {
   ui = {
     -- If you are using a Nerd Font: set icons to an empty table which will use the

lua/custom/plugins/autopairs.lua

@@ -0,0 +1,12 @@
+return {
+  'windwp/nvim-autopairs',
+  -- Optional dependency
+  dependencies = { 'hrsh7th/nvim-cmp' },
+  config = function()
+    require('nvim-autopairs').setup {}
+    -- If you want to automatically add `(` after selecting a function or method
+    local cmp_autopairs = require 'nvim-autopairs.completion.cmp'
+    local cmp = require 'cmp'
+    cmp.event:on('confirm_done', cmp_autopairs.on_confirm_done())
+  end,
+}

lua/custom/plugins/init.lua

@@ -1,5 +1,70 @@
 -- You can add your own plugins here or in other files in this directory!
 --  I promise not to create any merge conflicts in this directory :)
 --
--- See the kickstart.nvim README for more information
-return {}
+-- See the kickstart.nvim README for more informationc
+return {
+  {
+    'christoomey/vim-tmux-navigator',
+    lazy = false,
+    cmd = {
+      'TmuxNavigateLeft',
+      'TmuxNavigateDown',
+      'TmuxNavigateUp',
+      'TmuxNavigateRight',
+      'TmuxNavigatePrevious',
+    },
+    keys = {
+      { '<c-h>', '<cmd><C-U>TmuxNavigateLeft<cr>' },
+      { '<c-j>', '<cmd><C-U>TmuxNavigateDown<cr>' },
+      { '<c-k>', '<cmd><C-U>TmuxNavigateUp<cr>' },
+      { '<c-l>', '<cmd><C-U>TmuxNavigateRight<cr>' },
+      { '<c-\\>', '<cmd><C-U>TmuxNavigatePrevious<cr>' },
+    },
+  },
+
+  {
+    'ThePrimeagen/harpoon',
+    branch = 'harpoon2',
+    opts = {
+      menu = {
+        width = vim.api.nvim_win_get_width(0) - 4,
+      },
+      settings = {
+        save_on_toggle = true,
+      },
+    },
+    keys = function()
+      local keys = {
+        {
+          '<leader>H',
+          function()
+            require('harpoon'):list():add()
+          end,
+          desc = 'Harpoon File',
+        },
+        {
+          '<leader>h',
+          function()
+            local harpoon = require 'harpoon'
+            harpoon.ui:toggle_quick_menu(harpoon:list())
+          end,
+          desc = 'Harpoon Quick Menu',
+        },
+      }
+
+      for i = 1, 5 do
+        table.insert(keys, {
+          '<leader>' .. i,
+          function()
+            require('harpoon'):list():select(i)
+          end,
+          desc = 'Harpoon to File ' .. i,
+        })
+      end
+      return keys
+    end,
+  },
+  {
+    'ThePrimeagen/vim-be-good',
+  },
+}