* On Kobo, kill WiFi on startup if we detect an inconsistent state...
Untested, not terribly pretty.
The other solution is to slow down the Wi-Fi meny by doing the same
check for the "Wi-Fi connection" checkbox as in the later wifi_status
one...
* Don't enable auto_restore_wifi by default
It's liable to silently murder batteries for no good reason, given that
we prompt to enable WiFi by default when needed, and we otherwise have
no actual need to keep WiFi on in the background.
re #2215 (in particular, this directly contradicts @houqp in
https://github.com/koreader/koreader/pull/2215#discussion_r74696133 ;)).
* Enable HW dithering on supported devices (Clara HD, Forma; Oasis 2, PW4)
* FileManager and co. (where appropriate, i.e., when covers are shown)
* Book Status
* Reader, where appropriate:
* CRe: on pages whith image content (for over 7.5% of the screen area, should hopefully leave stuff like bullet points or small scene breaks alone).
* Other engines: on user-request (in the gear tab of the bottom menu), via the new "Dithering" knob (will only appear on supported devices).
* ScreenSaver
* ImageViewer
* Minimize repaints when flash_ui is enabled (by, almost everywhere, only repainting the flashing element, and not the toplevel window which hosts it).
(The first pass of this involved fixing a few Button instances whose show_parent was wrong, in particular, chevrons in the FM & TopMenu).
* Hunted down a few redundant repaints (unneeded setDirty("all") calls),
either by switching the widget to nil when only a refresh was needed, and not a repaint,
or by passing the appropritate widget to setDirty.
(Note to self: Enable *verbose* debugging to catch broken setDirty calls via its post guard).
There were also a few instances of 'em right behind a widget close.
* Don't repaint the underlying widget when initially showing TopMenu & ConfigDialog.
We unfortunately do need to do it when switching tabs, because of their variable heights.
* On Kobo, disabled the extra and completely useless full refresh before suspend/reboot/poweroff, as well as on resume. No more double refreshes!
* Fix another debug guard in Kobo sysfs_light
* Switch ImageWidget & ImageViewer mostly to "ui" updates, which will be better suited to image content pretty much everywhere, REAGL or not.
PS: (Almost 💯 commits! :D)
Supported devices:
- Boyue T61 and *some* clones
- Boyue T62 and *some* clones
- Onyx C67
- Energy Sistem (which are in fact Boyue T62 clones). Was tested on a energy pro 4.
Others may work with the same controller too, but are disabled by default.
Requires https://github.com/koreader/koreader-base/pull/798
Requires https://github.com/koreader/android-luajit-launcher/pull/96Fixes#4373Fixes#1613 (supported devices will show the "full refresh rate" option under eink settings. Others won't)
Related #4228 (need to add support for this specific device to work)
WiFi handling is handled asynchronously (deferred to lipc), so this is a
bit clunkier than on devices where we handle WiFi ourselves...
But, basically, try to honor the menu callback when toggling WiFi so
that the status gets updated in the menu.
Fix#4472
* use product as device model
* print android version (codename + number) + api at launch
* exit the application properly
* fix fullscreen switching (and disable it on newer android versions)
* gettext: lower log level for message: cannot open translation file
* android common settings refactor
Defines new function reconnectOrShowNetworkMenu(), which iterates over
available networks ordered by signal power, and check if we can connect
to saved SSIDs. If we can, then skip network list dialog.
* Fix the Touch input probe on Trilogy devices that depend on the touch_probe_ev_epoch_time quirk (fix#630)
* Expose a "Pageturn button inversion" feature in the Navigation menu (for all devices with keys) (fix#4446)
* Allow ignoring the accelerometer on the Forma (Screen > Ignore accelerometer rotation events; also available from the Gesture Manager) (fix#4451)
* Fix SleepCover handling on the Forma (fix#4457)
* Make isWifiOn a tiny bit more accurate (check the actual WiFi module instead of sdio_wifi_pwr)
* Move all flash related Screen options to the eInk submenu
* Enforce a known rotation on startup, to make sure we handle touch input coordinates properly.
* Proper FrontLight warmth support (thanks to @cairnsh & @pazos in #4291)!
* Fix the PageTurn buttons mapping to match Nickel's defaults
* Properly remap PageTurn buttons depending on the current rotation.
* Actually enable the Mk.7 screen refresh codepath on *all* Mk.7 devices (I'd messed up the device check...).
* Full accelerometer handling (includes a touch of refactoring regarding orientation handling in general).
* Fix insidiously broken USBMS behavior in Nickel after we exit on FW >4.8.
Fix#4291Fix#3002
* Implement isWifiOn on Kindle (fix#4380)
* Ensure frontlight intensity is properly restored on resume on Kindle. (fix #Fix #4392)
Only actually matters when the frontlight is *off*.
* remove unused setting 'internal_storage_mount_point
use filemanagerutil.getDefaultDir() instead
https://github.com/koreader/koreader/blob/master/frontend/apps/filemanager/filemanagerutil.lua#L15
* more info about device frontlight/naturalLight capabilities
* make stock reader fonts available in KOReader
* remove restore-wifi-async leftovers
* wireless: fix wpa_supplicant configuration:
make it compatible w/ debian wheezy binaries
don't try to run enable-wifi.sh more than once
* Pocketbook Color Lux detection
* fix rotation for Pocketbook Color Lux
* deal with 24bit RGB framebuffer that are reported as 8bit
* use default DPI for Pocketbook Color Lux
* bump base
* Tweak JIT's loopunroll threshold on Kobo 16bpp
To avoid early blacklist of the blitbuffer code on alpha-blending
workloads.
Least terrible workaround we could come up with to "fix" #4137
* gzip kindle/kobo/pb OTA tarballs w/ --rsyncable
Should make them more zsync friendly.
* Make findcalibre actually useful
By setting SEARCH_LIBRARY_PATH when a Calibre tree is found, so that
book paths can properly be constructed.
Users should still very much set it themselves, but at least everything
works as intended when not, instead of mysteriously half-breaking later.
Drop the SetDefaults bits, it appeared to have been added to fix no-ops
detected by Luacheck, and it's actually non-functional, because
SetDefaults doesn't handle saving variables it did not itself assign.
So this was just causing the "Do you want to save new defaults" popup to
show up on exit, but it couldn't actually do anything useful (like, say,
save the new SEARCH_LIBRARY_PATH value).
fix#4082
* Better comments about the state of NaturalLight on the Clara, and how this might translate to the H2O²r2.
re #4015
* Make ScrolltextWidget refresh as "partial" only on actual Scroll events
Moving the cursor should stay "ui", or things gets annoying really fast
;).
re #4084
* Bump base to pickup ZMQ fixes (fix#4086)
* Unbreak dropbear after #4077
* Move the Kindle SO check to init
* Various virtual keyboard fixes to eradicate the remaining refresh conflicts (i.e., tearing artifacts), no matter the user's settings. (re #4069, re #3130).
* With a bonus version normalizer fix.
* And a zsync bump/fix to avoid softlocks with OpenStack HTTP frontends (also, pull those from the OTA mirror list).
* Better KOA2 support
* Fix FL
* Add physical pageturn keys
* Add accelerometer support
* Possibly better NaturalLight handling on the Clara
* Fix WiFi module name used in some(?) Mk7 Kobos
* A bunch of kodev fixes
NiLuJe
Frans de Jonge
Martín Fernández
poire-z
Sergey Avseyev
Viktor Sokyrko
jperon
patrick-tang
wsotest
mbab
frio
Thomas Rebele
Matias N
Robert