bump crengine: support for EPUB3 nav toc and page maps
Includes:
- Fix lvRect:isRectInside(rc) with 0-width or 0-height rect
- TOC: parse EPUB3 nav toc, fallback to spine when no toc
- Parse and cache various hardcopy page list maps
- epub.css: hide EPUB3 <span epub:type="pagebreak"> content
cre.cpp: add a few PageMap helper functions.
Adds ReaderPageMap which will add a new menu (under TOC and
Bookmarks) that will allow:
- to list source page numbers (like a TOC)
- to show visible page labels in the right margin
- to use these source page numbers in the footer, the TOC,
the GoTo and SkimTo widgets, and to use the source page
number in the standard bookmark and highlight initial text.
Small tweaks all around to handle UI mirroring:
- swap existing symbols like arrows, or use alternative ones
- rotate some images, like chevrons and dogear icons
- flip some left and right swipe handling
- flip some geometry arithmetic like tap on left or right
side of page or dict window
- use new ProgressWidget:getPercentageFromPosition() instead
of geometry arithmetic
- BD.wrap() some concatenated string bits, like in reader
and menu footers
- flip inverse_reading_order when UI is mirrored
More specific tweaks:
- ReaderGesture: reset some specific gestures when UI direction
has changed (tap on top/bottom left/right corners, for
bookmarks and FileManager "Plus menu").
- ReaderRolling: show markers on the correct side of page,
in single or dual page mode.
- KoptOptions: swap left and right icons in Alignment toggle
- CheckMark: proper rendering in all 4 mirroring/rtl combinations.
- VirtualKeyboard: forbid any mirroring
- Move util.getMenuText into Menu.lua
* Restore '+' prefix when charging in the footer w/ letters prefixes
Regression since #5537
* Don't use a full battery icon in the menu entry
Make it clear that one isn't in-sync with the current gauge
* Unify battery meters look'n feel
Switch to proper (vertical) battery icons (one per 10% steps).
Fix#5535
* Bump fonts (https://github.com/koreader/koreader-fonts/pull/7)
Because we need the new symbols from nerdfonts ;).
* Don't break `doc_pages` updates when it's completely disabled. (c.f., the commit's comment, doing it on every page turn seems a bit overkill, but I get that it's probably done that way because it was easier ;)).
* Detect the empty footerTextGenerator properly in `_updateFooterText` (it's `""`, not `nil`).
* Abort `_updateFooterText` early when the footer is invisible (and has been for a while/ever, i.e., when not requesting a repaint, like a mode switch would).
* Never send `SetBottomPageMargin` events twice.
* Minor tweaks to touchmenu & configdialog to avoid useless repaints (don't redraw the reader/fm unless we absolutely need to).
* Make sure we show the progress bar alone instead of nothing when disabling the last enabled mode in the menu.
Thanks to <https://github.com/koreader/koreader/pull/5237> we can now extract the knowledge currently embedded in Transifex and put it directly in our source. This positively affects <https://github.com/koreader/koreader/issues/3754>.
Translation instructions and knowledge that comes out of localization-related questions should be preserved in the source, because Transifex is too ephemeral. For example, the links from <https://github.com/koreader/koreader/pull/2290> are no longer accessible. Even when they are, it's quite useful to have this information around while dealing with the code as well, and I also hope it'll be informative to contributors who seldom visit Transifex.
This commit also makes a few minor changes to obviate the need for comments where possible.
- show icons or letters as prefix of items
- various footer separators
- progress percentage format with decimal digits
- time in 12/24 format
- two duration formats (1:30, 1h30')
- move some options into Settings submenu
Without having to resort to weird custom defaults.
* Split the current margins setting in three:
* Horizontal margins (because you generally want those two to be balanced).
* Top margin & Bottom margin (because you may want to tweak those separately to deal with quirky status bar/final line shenanigans).
* Also, add a "Reclaim bar height from bottom margin" toggle to the status bar menu, to optionally make sure the status bar won't eat into the bottom margin.
* Includes a free fix to diacritics popup refresh handling in the keyboard ;).
* Make hasNaturalLight* caps safe to call without a device check. (fix#4919)
Make it clear that it's expecting the NTX implementation, though.
* Don't turn the FL on on resume if it was off on suspend
* Make sure turnOn/turnOff actually updates hw_intensity in the process where it matters, instead of just in a short lived fork ;). (fix#4923)
* Add a toggle to disable the C blitter in the Dev menu (depends on https://github.com/koreader/koreader-base/pull/882) (never shown if the JIT is disabled, grayed out if the C blitter is not installed)
* Fix a few sizeUtf8Text call sites that were doing a nil check in order to account for the new return type.
* Tweak statusbar handling to avoid spurious sizeUtf8Text warnings when it's hidden, and unify its behavior between being hidden via toggle, and hidden on book open (at least when all-at-once is not enabled).
* c.f., https://github.com/koreader/koreader-base/pull/882 (Android, PB, RGB32 & Legacy Kindle regression fixes).
* Enable HW dithering on supported devices (Clara HD, Forma; Oasis 2, PW4)
* FileManager and co. (where appropriate, i.e., when covers are shown)
* Book Status
* Reader, where appropriate:
* CRe: on pages whith image content (for over 7.5% of the screen area, should hopefully leave stuff like bullet points or small scene breaks alone).
* Other engines: on user-request (in the gear tab of the bottom menu), via the new "Dithering" knob (will only appear on supported devices).
* ScreenSaver
* ImageViewer
* Minimize repaints when flash_ui is enabled (by, almost everywhere, only repainting the flashing element, and not the toplevel window which hosts it).
(The first pass of this involved fixing a few Button instances whose show_parent was wrong, in particular, chevrons in the FM & TopMenu).
* Hunted down a few redundant repaints (unneeded setDirty("all") calls),
either by switching the widget to nil when only a refresh was needed, and not a repaint,
or by passing the appropritate widget to setDirty.
(Note to self: Enable *verbose* debugging to catch broken setDirty calls via its post guard).
There were also a few instances of 'em right behind a widget close.
* Don't repaint the underlying widget when initially showing TopMenu & ConfigDialog.
We unfortunately do need to do it when switching tabs, because of their variable heights.
* On Kobo, disabled the extra and completely useless full refresh before suspend/reboot/poweroff, as well as on resume. No more double refreshes!
* Fix another debug guard in Kobo sysfs_light
* Switch ImageWidget & ImageViewer mostly to "ui" updates, which will be better suited to image content pretty much everywhere, REAGL or not.
PS: (Almost 💯 commits! :D)
- ReaderConfig does not need to call again self:initGesListener() on
screen rotation/resize, as it uses the TouchZone infrastructure
that deals itself with rotation. So, it was adding new gestures
that were overriding tap on footer and preventing it from working.
- ReaderFooter: fix refresh area (which was too small when toggling
from hidden to visible)
- ReaderToc: fix crash when showing TOC in scroll mode after rotation
- Menu: fix crash when no onReturn defined (could happen when tap on
bottom left corner when showing an empty TOC)
Follow up to fa0117bb (#4268), to make things a bit clearer:
Only ReaderRolling get the 'SetStatusLine' event, and tells
crengine about the change, and then send the 'UpdatePos' event.
ReaderFooter now just gets a :setVisible() method.
Now, all the code that calls a self.ui.document:set* method, that
most probably triggers a full re-rendering by crengine, do signal
'UpdatePos' immediately after. This event signals that all page
number, pages count, positions... are no more valid and must be
queried or computed again.
This could also be used if we ever want to cache Page Links or
Screen Boxes: this event will have us dropped these caches.
Default setting set by holding on the bottom config buttons
for "View mode" (scroll/page) and "Progress bar" (full/mini)
were not used.
Also, when switching Progress bar from 'full' to 'mini',
show the mini bar again.
Includes:
- Avoid page break between a node and its borders
- Allow building an alternative TOC from document headings
On CRE documents, allows toggling between original TOC and an
alternative TOC with long-press on the "Table of content" menu
item.
Also update the Wikipedia stylesheet to further avoid
page-breaks between images and their caption, so a full
bordered wikipedia thumbnail is always full on a single page.
Use a setting 'copt_overlap_lines' (default to 1) for the
number of text lines from previous page to show on next
page (instead of a hardcoded and unscaled 20).
Take footer height into account for overlap calculation
and dim area.
Show overlap only when changing pages (not when panning).
Also fix ReaderFooter:getHeight() which was returning
a higher height than the real one since footer refactoring.
Martín Fdez
poire-z
yparitcher
Robert
NiLuJe
Frans de Jonge