--[[--
ReaderView module handles all the screen painting for document browsing.
]]

local AlphaContainer = require("ui/widget/container/alphacontainer")
local Blitbuffer = require("ffi/blitbuffer")
local ConfirmBox = require("ui/widget/confirmbox")
local Device = require("device")
local Geom = require("ui/geometry")
local Event = require("ui/event")
local ImageWidget = require("ui/widget/imagewidget")
local InfoMessage = require("ui/widget/infomessage")
local OverlapGroup = require("ui/widget/overlapgroup")
local ReaderDogear = require("apps/reader/modules/readerdogear")
local ReaderFlipping = require("apps/reader/modules/readerflipping")
local ReaderFooter = require("apps/reader/modules/readerfooter")
local UIManager = require("ui/uimanager")
local dbg = require("dbg")
local logger = require("logger")
local _ = require("gettext")
local Screen = Device.screen
local T = require("ffi/util").template

local ReaderView = OverlapGroup:extend{
    document = nil,

    -- single page state
    state = {
        page = nil,
        pos = 0,
        zoom = 1.0,
        rotation = 0,
        gamma = 1.0,
        offset = nil,
        bbox = nil,
    },
    outer_page_color = Blitbuffer.gray(DOUTER_PAGE_COLOR/15),
    -- highlight with "lighten" or "underscore" or "invert"
    highlight = {
        lighten_factor = 0.2,
        temp_drawer = "invert",
        temp = {},
        saved_drawer = "lighten",
        saved = {},
    },
    highlight_visible = true,
    -- PDF/DjVu continuous paging
    page_scroll = nil,
    page_bgcolor = Blitbuffer.gray(DBACKGROUND_COLOR/15),
    page_states = {},
    scroll_mode = "vertical",
    -- properties of the gap drawn between each page in scroll mode:
    page_gap = {
        -- width in pixels (when scrolling horizontally)
        width = Screen:scaleBySize(G_reader_settings:readSetting("page_gap_width") or 8),
        -- height in pixels (when scrolling vertically)
        height = Screen:scaleBySize(G_reader_settings:readSetting("page_gap_height") or 8),
        -- color (0 = white, 8 = gray, 15 = black)
        color = Blitbuffer.gray((G_reader_settings:readSetting("page_gap_color") or 8)/15),
    },
    -- DjVu page rendering mode (used in djvu.c:drawPage())
    render_mode = DRENDER_MODE, -- default to COLOR
    -- Crengine view mode
    view_mode = DCREREADER_VIEW_MODE, -- default to page mode
    hinting = true,

    -- visible area within current viewing page
    visible_area = Geom:new{x = 0, y = 0},
    -- dimen for current viewing page
    page_area = Geom:new{},
    -- dimen for area to dim
    dim_area = nil,
    -- has footer
    footer_visible = nil,
    -- has dogear
    dogear_visible = false,
    -- in flipping state
    flipping_visible = false,

    -- auto save settings after turning pages
    auto_save_paging_count = 0,
    autoSaveSettings = function()end
}

function ReaderView:init()
    self.view_modules = {}
    -- fix recalculate from close document pageno
    self.state.page = nil
    -- fix inherited dim_area for following opened documents
    self:resetDimArea()
    self:addWidgets()
    self.emitHintPageEvent = function()
        self.ui:handleEvent(Event:new("HintPage", self.hinting))
    end
end

function ReaderView:resetDimArea()
    self.dim_area = Geom:new{w = 0, h = 0}
end

function ReaderView:addWidgets()
    self.dogear = ReaderDogear:new{
        view = self,
        ui = self.ui,
    }
    self.footer = ReaderFooter:new{
        view = self,
        ui = self.ui,
    }
    self.flipping = ReaderFlipping:new{
        view = self,
        ui = self.ui,
    }
    self.arrow = AlphaContainer:new{
        alpha = 0.6,
        ImageWidget:new{
            file = "resources/icons/appbar.control.expand.png",
        }
    }
    self[1] = self.dogear
    self[2] = self.footer
    self[3] = self.flipping
end

--[[--
Register a view UI widget module for document browsing.

@tparam string name module name, registered widget can be accessed by readerui.view.view_modules[name].
@tparam ui.widget.widget.Widget widget paintable widget, i.e. has a paintTo method.

@usage
local ImageWidget = require("ui/widget/imagewidget")
local dummy_image = ImageWidget:new{
    file = "resources/icons/appbar.control.expand.png",
}
-- the image will be painted on all book pages
readerui.view:registerViewModule('dummy_image', dummy_image)
]]
function ReaderView:registerViewModule(name, widget)
    if not widget.paintTo then
        print(name .. " view module does not have paintTo method!")
        return
    end
    widget.view = self
    widget.ui = self.ui
    self.view_modules[name] = widget
end

function ReaderView:resetLayout()
    for _, widget in ipairs(self) do
        widget:resetLayout()
    end
    for _, m in pairs(self.view_modules) do
        if m.resetLayout then m:resetLayout() end
    end
end

function ReaderView:paintTo(bb, x, y)
    dbg:v("readerview painting", self.visible_area, "to", x, y)
    if self.page_scroll then
        self:drawPageBackground(bb, x, y)
    else
        self:drawPageSurround(bb, x, y)
    end

    -- draw page content
    if self.ui.document.info.has_pages then
        if self.page_scroll then
            self:drawScrollPages(bb, x, y)
        else
            self:drawSinglePage(bb, x, y)
        end
    else
        if self.view_mode == "page" then
            self:drawPageView(bb, x, y)
        elseif self.view_mode == "scroll" then
            self:drawScrollView(bb, x, y)
        end
    end

    -- dim last read area
    if self.dim_area.w ~= 0 and self.dim_area.h ~= 0 then
        if self.page_overlap_style == "dim" then
            bb:dimRect(
                self.dim_area.x, self.dim_area.y,
                self.dim_area.w, self.dim_area.h
            )
        elseif self.page_overlap_style == "arrow" then
            self.arrow:paintTo(bb, 0, self.dim_area.h)
        end
    end
    -- draw saved highlight
    if self.highlight_visible then
        self:drawSavedHighlight(bb, x, y)
    end
    -- draw temporary highlight
    if self.highlight.temp then
        self:drawTempHighlight(bb, x, y)
    end
    -- paint dogear
    if self.dogear_visible then
        self.dogear:paintTo(bb, x, y)
    end
    -- paint footer
    if self.footer_visible then
        self.footer:paintTo(bb, x, y)
    end
    -- paint flipping
    if self.flipping_visible then
        self.flipping:paintTo(bb, x, y)
    end
    for _, m in pairs(self.view_modules) do
        m:paintTo(bb, x, y)
    end
    -- stop activity indicator
    self.ui:handleEvent(Event:new("StopActivityIndicator"))

    -- Most pages should not require dithering
    self.dialog.dithered = nil
    -- For KOpt, let the user choose.
    if self.ui.document.info.has_pages then
        -- Also enforce dithering in PicDocument
        if self.ui.document.is_pic or self.document.configurable.hw_dithering == 1 then
            self.dialog.dithered = true
        end
    else
        -- Whereas for CRe,
        -- If we're attempting to show a large enough amount of image data, request dithering (without triggering another repaint ;)).
        local img_count, img_coverage = self.ui.document:getDrawnImagesStatistics()
        -- With some nil guards because this may not be implemented in every engine ;).
        if img_count and img_count > 0 and img_coverage and img_coverage >= 0.075 then
            self.dialog.dithered = true
        end
    end
end

--[[
Given coordinates on the screen return position in original page
]]--
function ReaderView:screenToPageTransform(pos)
    if self.ui.document.info.has_pages then
        if self.page_scroll then
            return self:getScrollPagePosition(pos)
        else
            return self:getSinglePagePosition(pos)
        end
    else
        pos.page = self.ui.document:getCurrentPage()
        -- local last_y = self.ui.document:getCurrentPos()
        logger.dbg("document has no pages at", pos)
        return pos
    end
end

--[[
Given rectangle in original page return rectangle on the screen
]]--
function ReaderView:pageToScreenTransform(page, rect)
    if self.ui.document.info.has_pages then
        if self.page_scroll then
            return self:getScrollPageRect(page, rect)
        else
            return self:getSinglePageRect(rect)
        end
    else
        return rect
    end
end

--[[
Get page area on screen for a given page number
--]]
function ReaderView:getScreenPageArea(page)
    if self.ui.document.info.has_pages then
        local area = Geom:new{x = 0, y = 0}
        if self.page_scroll then
            for _, state in ipairs(self.page_states) do
                if page ~= state.page then
                    area.y = area.y + state.visible_area.h + state.offset.y
                    area.y = area.y + self.page_gap.height
                else
                    area.x = state.offset.x
                    area.w = state.visible_area.w
                    area.h = state.visible_area.h
                    return area
                end
            end
        else
            area.x = self.state.offset.x
            area.y = self.state.offset.y
            area.w = self.visible_area.w
            area.h = self.visible_area.h
            return area
        end
    else
        return self.dimen
    end
end

function ReaderView:drawPageBackground(bb, x, y)
    bb:paintRect(x, y, self.dimen.w, self.dimen.h, self.page_bgcolor)
end

function ReaderView:drawPageSurround(bb, x, y)
    if self.dimen.h > self.visible_area.h then
        bb:paintRect(x, y, self.dimen.w, self.state.offset.y, self.outer_page_color)
        local bottom_margin = y + self.visible_area.h + self.state.offset.y
        bb:paintRect(x, bottom_margin, self.dimen.w, self.state.offset.y +
            self.ui.view.footer:getHeight(), self.outer_page_color)
    end
    if self.dimen.w > self.visible_area.w then
        bb:paintRect(x, y, self.state.offset.x, self.dimen.h, self.outer_page_color)
        bb:paintRect(x + self.dimen.w - self.state.offset.x - 1, y,
            self.state.offset.x + 1, self.dimen.h, self.outer_page_color)
    end
end

function ReaderView:drawScrollPages(bb, x, y)
    local pos = Geom:new{x = x , y = y}
    for page, state in ipairs(self.page_states) do
        self.ui.document:drawPage(
            bb,
            pos.x + state.offset.x,
            pos.y + state.offset.y,
            state.visible_area,
            state.page,
            state.zoom,
            state.rotation,
            state.gamma,
            self.render_mode)
        pos.y = pos.y + state.visible_area.h
        -- draw page gap if not the last part
        if page ~= #self.page_states then
            self:drawPageGap(bb, pos.x, pos.y)
            pos.y = pos.y + self.page_gap.height
        end
    end
    UIManager:nextTick(self.emitHintPageEvent)
end

function ReaderView:getCurrentPageList()
    local pages = {}
    if self.ui.document.info.has_pages then
        if self.page_scroll then
            for _, state in ipairs(self.page_states) do
                table.insert(pages, state.page)
            end
        else
            table.insert(pages, self.state.page)
        end
    end
    return pages
end

function ReaderView:getScrollPagePosition(pos)
    local x_p, y_p
    local x_s, y_s = pos.x, pos.y
    for _, state in ipairs(self.page_states) do
        if y_s < state.visible_area.h + state.offset.y then
            y_p = (state.visible_area.y + y_s - state.offset.y) / state.zoom
            x_p = (state.visible_area.x + x_s - state.offset.x) / state.zoom
            return {
                x = x_p,
                y = y_p,
                page = state.page,
                zoom = state.zoom,
                rotation = state.rotation,
            }
        else
            y_s = y_s - state.visible_area.h - self.page_gap.height
        end
    end
end

function ReaderView:getScrollPageRect(page, rect_p)
    local rect_s = Geom:new{}
    for _, state in ipairs(self.page_states) do
        local trans_p = Geom:new(rect_p):copy()
        trans_p:transformByScale(state.zoom, state.zoom)
        if page == state.page and state.visible_area:intersectWith(trans_p) then
            rect_s.x = rect_s.x + state.offset.x + trans_p.x - state.visible_area.x
            rect_s.y = rect_s.y + state.offset.y + trans_p.y - state.visible_area.y
            rect_s.w = trans_p.w
            rect_s.h = trans_p.h
            return rect_s
        end
        rect_s.y = rect_s.y + state.visible_area.h + self.page_gap.height
    end
end

function ReaderView:drawPageGap(bb, x, y)
    if self.scroll_mode == "vertical" then
        bb:paintRect(x, y, self.dimen.w, self.page_gap.height, self.page_gap.color)
    elseif self.scroll_mode == "horizontal" then
        bb:paintRect(x, y, self.page_gap.width, self.dimen.h, self.page_gap.color)
    end
end

function ReaderView:drawSinglePage(bb, x, y)
    self.ui.document:drawPage(
        bb,
        x + self.state.offset.x,
        y + self.state.offset.y,
        self.visible_area,
        self.state.page,
        self.state.zoom,
        self.state.rotation,
        self.state.gamma,
        self.render_mode)
    UIManager:nextTick(self.emitHintPageEvent)
end

function ReaderView:getSinglePagePosition(pos)
    local x_s, y_s = pos.x, pos.y
    return {
        x = (self.visible_area.x + x_s - self.state.offset.x) / self.state.zoom,
        y = (self.visible_area.y + y_s - self.state.offset.y) / self.state.zoom,
        page = self.state.page,
        zoom = self.state.zoom,
        rotation = self.state.rotation,
    }
end

function ReaderView:getSinglePageRect(rect_p)
    local rect_s = Geom:new{}
    local trans_p = Geom:new(rect_p):copy()
    trans_p:transformByScale(self.state.zoom, self.state.zoom)
    if self.visible_area:intersectWith(trans_p) then
        rect_s.x = self.state.offset.x + trans_p.x - self.visible_area.x
        rect_s.y = self.state.offset.y + trans_p.y - self.visible_area.y
        rect_s.w = trans_p.w
        rect_s.h = trans_p.h
        return rect_s
    end
end

function ReaderView:drawPageView(bb, x, y)
    self.ui.document:drawCurrentViewByPage(
        bb,
        x + self.state.offset.x,
        y + self.state.offset.y,
        self.visible_area,
        self.state.page)
end

function ReaderView:drawScrollView(bb, x, y)
    self.ui.document:drawCurrentViewByPos(
        bb,
        x + self.state.offset.x,
        y + self.state.offset.y,
        self.visible_area,
        self.state.pos)
end

function ReaderView:drawTempHighlight(bb, x, y)
    for page, boxes in pairs(self.highlight.temp) do
        for i = 1, #boxes do
            local rect = self:pageToScreenTransform(page, boxes[i])
            if rect then
                self:drawHighlightRect(bb, x, y, rect, self.highlight.temp_drawer)
            end
        end
    end
end

function ReaderView:drawSavedHighlight(bb, x, y)
    if self.ui.document.info.has_pages then
        self:drawPageSavedHighlight(bb, x, y)
    else
        self:drawXPointerSavedHighlight(bb, x, y)
    end
end

function ReaderView:drawPageSavedHighlight(bb, x, y)
    local pages = self:getCurrentPageList()
    for _, page in pairs(pages) do
        local items = self.highlight.saved[page]
        if not items then items = {} end
        for i = 1, #items do
            local item = items[i]
            local pos0, pos1 = item.pos0, item.pos1
            local boxes = self.ui.document:getPageBoxesFromPositions(page, pos0, pos1)
            if boxes then
                for _, box in pairs(boxes) do
                    local rect = self:pageToScreenTransform(page, box)
                    if rect then
                        self:drawHighlightRect(bb, x, y, rect, item.drawer or self.highlight.saved_drawer)
                    end
                end -- end for each box
            end -- end if boxes
        end -- end for each highlight
    end -- end for each page
end

function ReaderView:drawXPointerSavedHighlight(bb, x, y)
    -- Getting screen boxes is done for each tap on screen (changing pages,
    -- showing menu...). We might want to cache these boxes per page (and
    -- clear that cache when page layout change or highlights are added
    -- or removed).
    local cur_view_top, cur_view_bottom
    for page, _ in pairs(self.highlight.saved) do
        local items = self.highlight.saved[page]
        if not items then items = {} end
        for j = 1, #items do
            local item = items[j]
            local pos0, pos1 = item.pos0, item.pos1
            -- document:getScreenBoxesFromPositions() is expensive, so we
            -- first check this item is on current page
            if not cur_view_top then
                -- Even in page mode, it's safer to use pos and ui.dimen.h
                -- than pages' xpointers pos, even if ui.dimen.h is a bit
                -- larger than pages' heights
                cur_view_top = self.ui.document:getCurrentPos()
                if self.view_mode == "page" and self.ui.document:getVisiblePageCount() > 1 then
                    cur_view_bottom = cur_view_top + 2 * self.ui.dimen.h
                else
                    cur_view_bottom = cur_view_top + self.ui.dimen.h
                end
            end
            local spos0 = self.ui.document:getPosFromXPointer(pos0)
            local spos1 = self.ui.document:getPosFromXPointer(pos1)
            local start_pos = math.min(spos0, spos1)
            local end_pos = math.max(spos0, spos1)
            if start_pos <= cur_view_bottom and end_pos >= cur_view_top then
                local boxes = self.ui.document:getScreenBoxesFromPositions(pos0, pos1, true) -- get_segments=true
                if boxes then
                    for _, box in pairs(boxes) do
                        local rect = self:pageToScreenTransform(page, box)
                        if rect then
                            self:drawHighlightRect(bb, x, y, rect, item.drawer or self.highlight.saved_drawer)
                        end
                    end -- end for each box
                end -- end if boxes
            end
        end -- end for each highlight
    end -- end for all saved highlight
end

function ReaderView:drawHighlightRect(bb, _x, _y, rect, drawer)
    local x, y, w, h = rect.x, rect.y, rect.w, rect.h

    if drawer == "underscore" then
        self.highlight.line_width = self.highlight.line_width or 2
        self.highlight.line_color = self.highlight.line_color or Blitbuffer.COLOR_GRAY
        bb:paintRect(x, y+h-1, w,
            self.highlight.line_width,
            self.highlight.line_color)
    elseif drawer == "lighten" then
        bb:lightenRect(x, y, w, h, self.highlight.lighten_factor)
    elseif drawer == "invert" then
        bb:invertRect(x, y, w, h)
    end
end

function ReaderView:getPageArea(page, zoom, rotation)
    if self.use_bbox then
        return self.ui.document:getUsedBBoxDimensions(page, zoom, rotation)
    else
        return self.ui.document:getPageDimensions(page, zoom, rotation)
    end
end

--[[
This method is supposed to be only used by ReaderPaging
--]]
function ReaderView:recalculate()
    -- Start by resetting the dithering flag early, so it doesn't carry over from the previous page.
    self.dialog.dithered = nil

    if self.ui.document.info.has_pages and self.state.page then
        self.page_area = self:getPageArea(
            self.state.page,
            self.state.zoom,
            self.state.rotation)
        -- reset our size
        self.visible_area:setSizeTo(self.dimen)
        if self.ui.view.footer_visible then
            self.visible_area.h = self.visible_area.h - self.ui.view.footer:getHeight()
        end
        if self.ui.document.configurable.writing_direction == 0 then
            -- starts from left top of page_area
            self.visible_area.x = self.page_area.x
            self.visible_area.y = self.page_area.y
        else
            -- start from right top of page_area
            self.visible_area.x = self.page_area.x + self.page_area.w - self.visible_area.w
            self.visible_area.y = self.page_area.y
        end
        -- and recalculate it according to page size
        self.visible_area:offsetWithin(self.page_area, 0, 0)
        -- clear dim area
        self.dim_area.w = 0
        self.dim_area.h = 0
        self.ui:handleEvent(
            Event:new("ViewRecalculate", self.visible_area, self.page_area))
    else
        self.visible_area:setSizeTo(self.dimen)
    end
    self.state.offset = Geom:new{x = 0, y = 0}
    if self.dimen.h > self.visible_area.h then
        if self.ui.view.footer_visible then
            self.state.offset.y = (self.dimen.h - (self.visible_area.h + self.ui.view.footer:getHeight())) / 2
        else
            self.state.offset.y = (self.dimen.h - self.visible_area.h) / 2
        end
    end
    if self.dimen.w > self.visible_area.w then
        self.state.offset.x = (self.dimen.w - self.visible_area.w) / 2
    end
    -- flag a repaint so self:paintTo will be called
    -- NOTE: This is also unfortunately called during panning, essentially making sure we'll never be using "fast" for pans ;).
    UIManager:setDirty(self.dialog, "partial")
end

function ReaderView:PanningUpdate(dx, dy)
    logger.dbg("pan by", dx, dy)
    local old = self.visible_area:copy()
    self.visible_area:offsetWithin(self.page_area, dx, dy)
    if self.visible_area ~= old then
        -- flag a repaint
        UIManager:setDirty(self.dialog, "partial")
        logger.dbg("on pan: page_area", self.page_area)
        logger.dbg("on pan: visible_area", self.visible_area)
        self.ui:handleEvent(
            Event:new("ViewRecalculate", self.visible_area, self.page_area))
    end
    return true
end

function ReaderView:PanningStart(x, y)
    logger.dbg("panning start", x, y)
    if not self.panning_visible_area then
        self.panning_visible_area = self.visible_area:copy()
    end
    self.visible_area = self.panning_visible_area:copy()
    self.visible_area:offsetWithin(self.page_area, x, y)
    self.ui:handleEvent(Event:new("ViewRecalculate", self.visible_area, self.page_area))
    UIManager:setDirty(self.dialog, "partial")
end

function ReaderView:PanningStop()
    self.panning_visible_area = nil
end

function ReaderView:SetZoomCenter(x, y)
    local old = self.visible_area:copy()
    self.visible_area:centerWithin(self.page_area, x, y)
    if self.visible_area ~= old then
        self.ui:handleEvent(Event:new("ViewRecalculate", self.visible_area, self.page_area))
        UIManager:setDirty(self.dialog, "partial")
    end
end

function ReaderView:getViewContext()
    if self.page_scroll then
        return self.page_states
    else
        return {
            {
                page = self.state.page,
                pos = self.state.pos,
                zoom = self.state.zoom,
                rotation = self.state.rotation,
                gamma = self.state.gamma,
                offset = self.state.offset:copy(),
                bbox = self.state.bbox,
            },
            self.visible_area:copy(),
            self.page_area:copy(),
        }
    end
end

function ReaderView:restoreViewContext(ctx)
    if self.page_scroll then
        self.page_states = ctx
    else
        self.state = ctx[1]
        self.visible_area = ctx[2]
        self.page_area = ctx[3]
    end
end

-- NOTE: This is just a shim for koptoptions, because we want to be able to pass an optional second argument to SetScreenMode...
--       This is also used as a sink for gsensor input events, because we can only send a single event per input,
--       and we need to cover both CRe & KOpt...
function ReaderView:onSwapScreenMode(new_mode, rotation)
    -- Don't do anything if an explicit rotation was requested, but it hasn't actually changed,
    -- because we may be sending this event *right before* a ChangeScreenMode in CRe (gyro)
    if rotation ~= nil and rotation ~= true and rotation == Screen:getRotationMode() then
        return true
    end
    -- CRe
    self.ui:handleEvent(Event:new("ChangeScreenMode", new_mode, rotation or true))
    -- KOpt (On CRe, since it's redundant (RR:onChangeScreenMode already sends one), this'll get discarded early)
    self.ui:handleEvent(Event:new("SetScreenMode", new_mode, rotation or true))
end

function ReaderView:onSetScreenMode(new_mode, rotation, noskip)
    -- Don't do anything if an explicit rotation was requested, but it hasn't actually changed,
    -- because we may be sending this event *right after* a ChangeScreenMode in CRe (gsensor)
    -- We only want to let the onReadSettings one go through, otherwise the testsuite blows up...
    if noskip == nil and rotation ~= nil and rotation ~= true and rotation == Screen:getRotationMode() then
        return true
    end
    if new_mode == "landscape" or new_mode == "portrait" then
        self.screen_mode = new_mode
        -- NOTE: Hacky hack! If rotation is "true", that's actually an "interactive" flag for setScreenMode
        --- @fixme That's because we can't store nils in a table, which is what Event:new attempts to do ;).
        --        c.f., <https://stackoverflow.com/q/7183998/> & <http://lua-users.org/wiki/VarargTheSecondClassCitizen>
        --        With a fixed Event implementation, we'd instead stick "interactive" in a third argument,
        --        which we could happily pass while still keeping rotation nil ;).
        if rotation ~= nil and rotation ~= true then
            Screen:setRotationMode(rotation)
        else
            Screen:setScreenMode(new_mode, rotation)
        end
        UIManager:setDirty(self.dialog, "full")
        local new_screen_size = Screen:getSize()
        self.ui:handleEvent(Event:new("SetDimensions", new_screen_size))
        self.ui:onScreenResize(new_screen_size)
        self.ui:handleEvent(Event:new("InitScrollPageStates"))
    end
    self.cur_rotation_mode = Screen:getRotationMode()
    return true
end

function ReaderView:onSetDimensions(dimensions)
    self:resetLayout()
    self.dimen = dimensions
    -- recalculate view
    self:recalculate()
end

function ReaderView:onRestoreDimensions(dimensions)
    self:resetLayout()
    self.dimen = dimensions
    -- recalculate view
    self:recalculate()
end

function ReaderView:onSetFullScreen(full_screen)
    self.footer_visible = not full_screen
    self.ui:handleEvent(Event:new("SetDimensions", Screen:getSize()))
end

function ReaderView:onSetScrollMode(page_scroll)
    if self.ui.document.info.has_pages and page_scroll and self.ui.zooming.paged_modes[self.zoom_mode] then
        UIManager:show(InfoMessage:new{
            text = _([[
Continuous view (scroll mode) works best with zoom to page width or zoom to content width.

In combination with zoom to fit page, page height, content height or content, continuous view can cause unexpected shifts when turning pages.]]),
            timeout = 5,
        })
    end

    self.page_scroll = page_scroll
    self:recalculate()
    self.ui:handleEvent(Event:new("InitScrollPageStates"))
end

function ReaderView:onReadSettings(config)
    local screen_mode
    self.render_mode = config:readSetting("render_mode") or 0
    if self.ui.document.info.has_pages then
        screen_mode = config:readSetting("screen_mode") or G_reader_settings:readSetting("kopt_screen_mode") or "portrait"
    else
        screen_mode = config:readSetting("screen_mode") or G_reader_settings:readSetting("copt_screen_mode") or "portrait"
    end
    if screen_mode then
        Screen:setScreenMode(screen_mode)
        self:onSetScreenMode(screen_mode, config:readSetting("rotation_mode"), true)
    end
    self.state.gamma = config:readSetting("gamma") or DGLOBALGAMMA
    local full_screen = config:readSetting("kopt_full_screen") or self.document.configurable.full_screen
    if full_screen == 0 then
        self.footer_visible = false
    end
    self:resetLayout()
    local page_scroll = config:readSetting("kopt_page_scroll") or self.document.configurable.page_scroll
    self.page_scroll = page_scroll == 1 and true or false
    self.highlight.saved = config:readSetting("highlight") or {}
    self.page_overlap_style = config:readSetting("page_overlap_style") or G_reader_settings:readSetting("page_overlap_style") or "dim"
end

function ReaderView:onPageUpdate(new_page_no)
    self.state.page = new_page_no
    self:recalculate()
    self.highlight.temp = {}
    UIManager:nextTick(self.autoSaveSettings)
end

function ReaderView:onPosUpdate(new_pos)
    self.state.pos = new_pos
    self:recalculate()
    self.highlight.temp = {}
    UIManager:nextTick(self.autoSaveSettings)
end

function ReaderView:onZoomUpdate(zoom)
    self.state.zoom = zoom
    self:recalculate()
    self.highlight.temp = {}
end

function ReaderView:onBBoxUpdate(bbox)
    self.use_bbox = bbox and true or false
end

function ReaderView:onRotationUpdate(rotation)
    self.state.rotation = rotation
    self:recalculate()
end

function ReaderView:onGammaUpdate(gamma)
    self.state.gamma = gamma
    if self.page_scroll then
        self.ui:handleEvent(Event:new("UpdateScrollPageGamma", gamma))
    end
end

function ReaderView:onFontSizeUpdate(font_size)
    self.ui:handleEvent(Event:new("ReZoom", font_size))
end

function ReaderView:onDefectSizeUpdate()
    self.ui:handleEvent(Event:new("ReZoom"))
end

function ReaderView:onPageCrop()
    self.ui:handleEvent(Event:new("ReZoom"))
end

function ReaderView:onMarginUpdate()
    self.ui:handleEvent(Event:new("ReZoom"))
end

function ReaderView:onSetViewMode(new_mode)
    if new_mode ~= self.view_mode then
        self.view_mode = new_mode
        self.ui.document:setViewMode(new_mode)
        self.ui:handleEvent(Event:new("ChangeViewMode"))
    end
    return true
end

function ReaderView:onSaveSettings()
    self.ui.doc_settings:saveSetting("render_mode", self.render_mode)
    self.ui.doc_settings:saveSetting("screen_mode", self.screen_mode)
    self.ui.doc_settings:saveSetting("rotation_mode", self.cur_rotation_mode)
    self.ui.doc_settings:saveSetting("gamma", self.state.gamma)
    self.ui.doc_settings:saveSetting("highlight", self.highlight.saved)
    self.ui.doc_settings:saveSetting("page_overlap_style", self.page_overlap_style)
end

function ReaderView:getRenderModeMenuTable()
    local view = self
    local function make_mode(text, mode)
        return {
            text = text,
            checked_func = function() return view.render_mode == mode end,
            callback = function() view.render_mode = mode end,
        }
    end
    return  {
        -- @translators Selects which layers of the DjVu image should be rendered.  Valid  rendering  modes are color, black, mask, foreground, and background. See http://djvu.sourceforge.net/ and https://en.wikipedia.org/wiki/DjVu for more information about the format.
        text = _("DjVu render mode"),
        sub_item_table = {
            make_mode(_("COLOUR (works for both colour and b&w pages)"), 0),
            make_mode(_("BLACK & WHITE (for b&w pages only, much faster)"), 1),
            make_mode(_("COLOUR ONLY (slightly faster than COLOUR)"), 2),
            make_mode(_("MASK ONLY (for b&w pages only)"), 3),
            make_mode(_("COLOUR BACKGROUND (show only background)"), 4),
            make_mode(_("COLOUR FOREGROUND (show only foreground)"), 5),
        }
    }
end

local page_overlap_styles = {
    arrow = _("Arrow"),
    dim = _("Gray out"),
}

function ReaderView:genOverlapStyleMenu(overlap_enabled_func)
    local view = self
    local get_overlap_style = function(style)
        return {
            text = page_overlap_styles[style],
            enabled_func = overlap_enabled_func,
            checked_func = function()
                return view.page_overlap_style == style
            end,
            callback = function()
                view.page_overlap_style = style
            end,
            hold_callback = function()
                UIManager:show(ConfirmBox:new{
                    text = T(
                        _("Set default overlap style to %1?"),
                        style
                    ),
                    ok_callback = function()
                        view.page_overlap_style = style
                        G_reader_settings:saveSetting("page_overlap_style", style)
                    end,
                })
            end,
        }
    end
    return {
        get_overlap_style("arrow"),
        get_overlap_style("dim"),
    }
end

function ReaderView:onCloseDocument()
    self.hinting = false
    -- stop any in fly HintPage event
    UIManager:unschedule(self.emitHintPageEvent)
end

function ReaderView:onReaderReady()
    if DAUTO_SAVE_PAGING_COUNT ~= nil then
        if DAUTO_SAVE_PAGING_COUNT <= 0 then
            self.autoSaveSettings = function()
                self.ui:saveSettings()
            end
        else
            self.autoSaveSettings = function()
                self.auto_save_paging_count = self.auto_save_paging_count + 1
                if self.auto_save_paging_count == DAUTO_SAVE_PAGING_COUNT then
                    self.ui:saveSettings()
                    self.auto_save_paging_count = 0
                end
            end
        end
    end
end

return ReaderView