All #ifndef guards on headers have been removed, I think,
in favor of #pragma once
Headers are now included as `#include "filename"` if the included file
resides in the same directory as the file including it, or any
subdirectory therein. Otherwise they are included as
`#include <project/top/dir/relative/path/filename>`
The above does not include system/os headers.
loop->call(...) is similar to the old logic->Call(...), but is smart
about the current thread: if called from within the event loop it simply
runs the argument directly, otherwise it queues it.
Similarly most of the other event loop calls are also now thread-aware:
for example, `call_later(...)` can queue the job directly when called if
in the event loop rather than having to double-queue through the even
loop (once to call, then inside the call to initiate the time).
* redo setcap on linux so that it's required to do install targets on linux
* add -DWITH_SETCAP=OFF option to bypass setcap requirement on linux
* remove lokinet-bootstrap.ps1 as we bundle the bootstrap in the win32 installer now
* remove references to lokinet-bootstrap.ps1 in cmake
* bump zmq static dep
* lokimq -> oxenmq
* llarp_nodedb -> llarp::NodeDB
* remove all crufty api parts of NodeDB
* make NodeDB rc selection api not suck
* make path builder api not suck
* propagate all above changes so that unit tests work and it all compiles
* partial tun code refactor
* take out the trash
* move vpn platform code into llarp/vpn/platform.cpp
* fix hive build
* fix win32
* fix memory leak on win32
* reduce cpu use
* make macos compile
* win32 patches:
* use wepoll for zmq
* use all cores on windows iocp read loop
* fix zmq patch for windows
* clean up cmake for win32
* add uninstall before reinstall option to win32 installer
* more ipv6 stuff
* make it compile
* fix up route poker
* remove an unneeded code block in macos wtf
* always use call to system
* fix route poker behavior on macos
* disable ipv6 on windows for now
* cpu perf improvement:
* colease calls to Router::PumpLL to 1 per event loop wakeup
* set up THEN add addresses
* emulate proactor event loop on win32
* remove excessively verbose error message
* fix issue #1499
* exclude uv_poll from win32 so that it can start up
* update logtag to include directory
* create minidump on windows if there was a crash
* make windows happy
* use dmp suffix on minidump files
* typo fix
* address feedback from jason
* use PROJECT_SOURCE_DIR instead of CMAKE_SOURCE_DIR
* quote $@ in apply-patches in case path has spaces in it
* address feedback from tom
* remove llarp/ev/pipe
* add comments for clairification
* make event loop queue size constant named
* llarp::Config constructor can take an empty fs::path now and it will default to fs::current_path
* llarp::ensureConfig now throws on fs error
* updates to daemon/main.cpp to reflect changes to llarp::ensureConfig's new throwability
* dowse parts of the code with holy water for the 0.8.1 tag
* Should fix some windows service issues
* fix return condition inversion
* Add some Trace level logging
also make the logger actually respect the log level you set.
* event loop should not queue things to itself...
at present, logic thread queue continues until it is empty, so
queueing things onto itself is just wasteful.
* call_later(foreach thing) is better than foreach thing (call later)
also if you already queued those things but they have not happened yet,
there is no sense to queue them to happen again.
* do not queue read on write finish, only on read finish
* failure to start DNS server should be proper startup failure.
without the DNS server working lokinet is...kinda pointless, right?
* format
* don't queue stuff to logic thread if in logic thread
the thing that clears the queue...clears it. So you're just delaying and adding overhead.
* windows unbound thread sleep instead of just busy-waiting
also clang-format decided I can't have a blank line for some reason...
* fix unbound async worker on windows
* add conf.d directory for config overrides
* refactor llarp::Config
* add explicit constructor with datadir as parameter
* have all config files be passed as std::optional
* make Config::LoadDefault private and use std::optional in Config::Load to remove ambiguity
* update rest of codebase to reflect above changes
* fix pybind
* rename bootstrap config skipBootstrap to seednode as it's more descriptive
* make seednode configurable
* make pybind layer compile
* make pybind layer run
* Config file API/comment improvements
API improvements:
=================
Make the config API use position-independent tag parameters (Required,
Default{123}, MultiValue) rather than a sequence of bools with
overloads. For example, instead of:
conf.defineOption<int>("a", "b", false, true, 123, [] { ... });
you now write:
conf.defineOption<int>("a", "b", MultiValue, Default{123}, [] { ... });
The tags are:
- Required
- MultiValue
- Default{value}
plus new abilities (see below):
- Hidden
- RelayOnly
- ClientOnly
- Comment{"line1", "line2", "line3"}
Made option definition more powerful:
=====================================
- `Hidden` allows you to define an option that won't show up in the
generated config file if it isn't set.
- `RelayOnly`/`ClientOnly` sets up an option that is only accepted and
only shows up for relay or client configs. (If neither is specified
the option shows up in both modes).
- `Comment{...}` lets the option comments be specified as part of the
defineOption.
Comment improvements
====================
- Rewrote comments for various options to expand on details.
- Inlined all the comments with the option definitions.
- Several options that were missing comments got comments added.
- Made various options for deprecated and or internal options hidden by
default so that they don't show up in a default config file.
- show the section comment (but not option comments) *after* the
[section] tag instead of before it as it makes more sense that way
(particularly for the [bind] section which has a new long comment to
describe how it works).
Disable profiling by default
============================
We had this weird state where we use and store profiling by default but
never *load* it when starting up. This commit makes us just not use
profiling at all unless explicitly enabled.
Other misc changes:
===================
- change default worker threads to 0 (= num cpus) instead of 1, and fix
it to allow 0.
- Actually apply worker-threads option
- fixed default data-dir value erroneously having quotes around it
- reordered ifname/ifaddr/mapaddr (was previously mapaddr/ifaddr/ifname)
as mapaddr is a sort of specialization of ifaddr and so makes more
sense to come after it (particularly because it now references ifaddr
in its help message).
- removed peer-stats option (since we always require it for relays and
never use it for clients)
- removed router profiles filename option (this doesn't need to be
configurable)
- removed defunct `service-node-seed` option
- Change default logging output file to "" (which means stdout), and
also made "-" work for stdout.
* Router hive compilation fixes
* Comments for SNApp SRV settings in ini file
* Add extra blank line after section comments
* Better deprecated option handling
Allow {client,relay}-only options in {relay,client} configs to be
specified as implicitly deprecated options: they warn, and don't set
anything.
Add an explicit `Deprecated` tag and move deprecated option handling
into definition.cpp.
* Move backwards compat options into section definitions
Keep the "addBackwardsCompatibleConfigOptions" only for options in
sections that no longer exist.
* Fix INI parsing issues & C++17-ify
- don't allow inline comments because it seems they aren't allowed in
ini formats in general, and is going to cause problems if there is a
comment character in a value (e.g. an exit auth string). Additionally
it was breaking on a line such as:
# some comment; see?
because it was treating only `; see?` as the comment and then producing
an error message about the rest of the line being invalid.
- make section parsing stricter: the `[` and `]` have to be at the
beginning at end of the line now (after stripping whitespace).
- Move whitespace stripping to the top since everything in here does it.
- chop off string_view suffix/prefix rather than maintaining position
values
- fix potential infinite loop/segfault when given a line such as `]foo[`
* Make config parsing failure fatal
Load() LogError's and returns false on failure, so we weren't aborting
on config file errors.
* Formatting: allow `{}` for empty functions/structs
Instead of using two lines when empty:
{
}
* Make default dns bind 127.0.0.1 on non-Linux
* Don't show empty section; fix tests
We can conceivably have sections that only make sense for clients or
relays, and so want to completely omit that section if we have no
options for the type of config being generated.
Also fixes missing empty lines between tests.
Co-authored-by: Thomas Winget <tewinget@gmail.com>
The debs don't want it (and so this will save needing to patch it out),
nor do you need it if running via a systemd service file that sets the
capabilities.
* - allow running lokinet as root on windows
($PROGRAMDATA/.lokinet/lokinet.ini)
- oops forgot to eat my own command line args
* cursed windows
* now that we eat our own startup options the entry in cxxopts is fully
ded
* aha our command line options get smashed up
* revert plus DRY fix
Jeff Becker
Jason Rhinelander
Thomas Winget
Rick V
Rick V