package loop import ( "context" "crypto/rand" "crypto/sha256" "fmt" "time" "github.com/lightninglabs/loop/swap" "github.com/btcsuite/btcutil" "github.com/lightningnetwork/lnd/chainntnfs" "github.com/lightningnetwork/lnd/channeldb" "github.com/btcsuite/btcd/wire" "github.com/lightningnetwork/lnd/lnrpc/invoicesrpc" "github.com/lightninglabs/loop/lndclient" "github.com/lightninglabs/loop/loopdb" "github.com/lightningnetwork/lnd/lntypes" ) var ( // MaxLoopInAcceptDelta configures the maximum acceptable number of // remaining blocks until the on-chain htlc expires. This value is used // to decide whether we want to continue with the swap parameters as // proposed by the server. It is a protection to prevent the server from // getting us to lock up our funds to an arbitrary point in the future. MaxLoopInAcceptDelta = int32(1500) // MinLoopInPublishDelta defines the minimum number of remaining blocks // until on-chain htlc expiry required to proceed to publishing the htlc // tx. This value isn't critical, as we could even safely publish the // htlc after expiry. The reason we do implement this check is to // prevent us from publishing an htlc that the server surely wouldn't // follow up to. MinLoopInPublishDelta = int32(10) // TimeoutTxConfTarget defines the confirmation target for the loop in // timeout tx. TimeoutTxConfTarget = int32(2) ) // loopInSwap contains all the in-memory state related to a pending loop in // swap. type loopInSwap struct { swapKit loopdb.LoopInContract timeoutAddr btcutil.Address } // newLoopInSwap initiates a new loop in swap. func newLoopInSwap(globalCtx context.Context, cfg *swapConfig, currentHeight int32, request *LoopInRequest) (*loopInSwap, error) { // Request current server loop in terms and use these to calculate the // swap fee that we should subtract from the swap amount in the payment // request that we send to the server. quote, err := cfg.server.GetLoopInQuote(globalCtx, request.Amount) if err != nil { return nil, fmt.Errorf("loop in terms: %v", err) } swapFee := quote.SwapFee if swapFee > request.MaxSwapFee { logger.Warnf("Swap fee %v exceeding maximum of %v", swapFee, request.MaxSwapFee) return nil, ErrSwapFeeTooHigh } // Calculate the swap invoice amount. The prepay is added which // effectively forces the server to pay us back our prepayment on a // successful swap. swapInvoiceAmt := request.Amount - swapFee // Generate random preimage. var swapPreimage lntypes.Preimage if _, err := rand.Read(swapPreimage[:]); err != nil { logger.Error("Cannot generate preimage") } swapHash := lntypes.Hash(sha256.Sum256(swapPreimage[:])) // Derive a sender key for this swap. keyDesc, err := cfg.lnd.WalletKit.DeriveNextKey( globalCtx, swap.KeyFamily, ) if err != nil { return nil, err } var senderKey [33]byte copy(senderKey[:], keyDesc.PubKey.SerializeCompressed()) // Create the swap invoice in lnd. _, swapInvoice, err := cfg.lnd.Client.AddInvoice( globalCtx, &invoicesrpc.AddInvoiceData{ Preimage: &swapPreimage, Value: swapInvoiceAmt, Memo: "swap", Expiry: 3600 * 24 * 365, }, ) if err != nil { return nil, err } // Post the swap parameters to the swap server. The response contains // the server success key and the expiry height of the on-chain swap // htlc. logger.Infof("Initiating swap request at height %v", currentHeight) swapResp, err := cfg.server.NewLoopInSwap(globalCtx, swapHash, request.Amount, senderKey, swapInvoice, ) if err != nil { return nil, fmt.Errorf("cannot initiate swap: %v", err) } // Validate the response parameters the prevent us continuing with a // swap that is based on parameters outside our allowed range. err = validateLoopInContract(cfg.lnd, currentHeight, request, swapResp) if err != nil { return nil, err } // Instantiate a struct that contains all required data to start the // swap. initiationTime := time.Now() contract := loopdb.LoopInContract{ HtlcConfTarget: request.HtlcConfTarget, LoopInChannel: request.LoopInChannel, ExternalHtlc: request.ExternalHtlc, SwapContract: loopdb.SwapContract{ InitiationHeight: currentHeight, InitiationTime: initiationTime, ReceiverKey: swapResp.receiverKey, SenderKey: senderKey, Preimage: swapPreimage, AmountRequested: request.Amount, CltvExpiry: swapResp.expiry, MaxMinerFee: request.MaxMinerFee, MaxSwapFee: request.MaxSwapFee, }, } swapKit, err := newSwapKit( swapHash, TypeIn, cfg, &contract.SwapContract, swap.HtlcNP2WSH, ) if err != nil { return nil, err } swapKit.lastUpdateTime = initiationTime swap := &loopInSwap{ LoopInContract: contract, swapKit: *swapKit, } // Persist the data before exiting this function, so that the caller can // trust that this swap will be resumed on restart. err = cfg.store.CreateLoopIn(swapHash, &swap.LoopInContract) if err != nil { return nil, fmt.Errorf("cannot store swap: %v", err) } return swap, nil } // resumeLoopInSwap returns a swap object representing a pending swap that has // been restored from the database. func resumeLoopInSwap(reqContext context.Context, cfg *swapConfig, pend *loopdb.LoopIn) (*loopInSwap, error) { hash := lntypes.Hash(sha256.Sum256(pend.Contract.Preimage[:])) logger.Infof("Resuming loop in swap %v", hash) swapKit, err := newSwapKit( hash, TypeIn, cfg, &pend.Contract.SwapContract, swap.HtlcNP2WSH, ) if err != nil { return nil, err } swap := &loopInSwap{ LoopInContract: *pend.Contract, swapKit: *swapKit, } lastUpdate := pend.LastUpdate() if lastUpdate == nil { swap.lastUpdateTime = pend.Contract.InitiationTime } else { swap.state = lastUpdate.State swap.lastUpdateTime = lastUpdate.Time } return swap, nil } // validateLoopInContract validates the contract parameters against our // request. func validateLoopInContract(lnd *lndclient.LndServices, height int32, request *LoopInRequest, response *newLoopInResponse) error { // Verify that we are not forced to publish an htlc that locks up our // funds for too long in case the server doesn't follow through. if response.expiry-height > MaxLoopInAcceptDelta { return ErrExpiryTooFar } return nil } // execute starts/resumes the swap. It is a thin wrapper around executeSwap to // conveniently handle the error case. func (s *loopInSwap) execute(mainCtx context.Context, cfg *executeConfig, height int32) error { s.executeConfig = *cfg s.height = height // Announce swap by sending out an initial update. err := s.sendUpdate(mainCtx) if err != nil { return err } // Execute the swap until it either reaches a final state or a temporary // error occurs. err = s.executeSwap(mainCtx) // Sanity check. If there is no error, the swap must be in a final // state. if err == nil && s.state.Type() == loopdb.StateTypePending { err = fmt.Errorf("swap in non-final state %v", s.state) } // If an unexpected error happened, report a temporary failure // but don't persist the error. Otherwise for example a // connection error could lead to abandoning the swap // permanently and losing funds. if err != nil { s.log.Errorf("Swap error: %v", err) s.setState(loopdb.StateFailTemporary) // If we cannot send out this update, there is nothing we can do. _ = s.sendUpdate(mainCtx) return err } s.log.Infof("Loop in swap completed: %v "+ "(final cost: server %v, onchain %v, offchain %v)", s.state, s.cost.Server, s.cost.Onchain, s.cost.Offchain, ) return nil } // executeSwap executes the swap. func (s *loopInSwap) executeSwap(globalCtx context.Context) error { var err error // For loop in, the client takes the first step by publishing the // on-chain htlc. Only do this is we haven't already done so in a // previous run. if s.state == loopdb.StateInitiated { if s.ExternalHtlc { // If an external htlc was indicated, we can move to the // HtlcPublished state directly and wait for // confirmation. s.setState(loopdb.StateHtlcPublished) err = s.persistState(globalCtx) if err != nil { return err } } else { published, err := s.publishOnChainHtlc(globalCtx) if err != nil { return err } if !published { return nil } } } // Wait for the htlc to confirm. After a restart this will pick up a // previously published tx. conf, err := s.waitForHtlcConf(globalCtx) if err != nil { return err } // Determine the htlc outpoint by inspecting the htlc tx. htlcOutpoint, htlcValue, err := swap.GetScriptOutput( conf.Tx, s.htlc.PkScript, ) if err != nil { return err } // TODO: Add miner fee of htlc tx to swap cost balance. // The server is expected to see the htlc on-chain and knowing that it // can sweep that htlc with the preimage, it should pay our swap // invoice, receive the preimage and sweep the htlc. We are waiting for // this to happen and simultaneously watch the htlc expiry height. When // the htlc expires, we will publish a timeout tx to reclaim the funds. err = s.waitForSwapComplete(globalCtx, htlcOutpoint, htlcValue) if err != nil { return err } // Persist swap outcome. if err := s.persistState(globalCtx); err != nil { return err } return nil } // waitForHtlcConf watches the chain until the htlc confirms. func (s *loopInSwap) waitForHtlcConf(globalCtx context.Context) ( *chainntnfs.TxConfirmation, error) { ctx, cancel := context.WithCancel(globalCtx) defer cancel() confChan, confErr, err := s.lnd.ChainNotifier.RegisterConfirmationsNtfn( ctx, nil, s.htlc.PkScript, 1, s.InitiationHeight, ) if err != nil { return nil, err } for { select { // Htlc confirmed. case conf := <-confChan: return conf, nil // Conf ntfn error. case err := <-confErr: return nil, err // Keep up with block height. case notification := <-s.blockEpochChan: s.height = notification.(int32) // Cancel. case <-globalCtx.Done(): return nil, globalCtx.Err() } } } // publishOnChainHtlc checks whether there are still enough blocks left and if // so, it publishes the htlc and advances the swap state. func (s *loopInSwap) publishOnChainHtlc(ctx context.Context) (bool, error) { var err error blocksRemaining := s.CltvExpiry - s.height s.log.Infof("Blocks left until on-chain expiry: %v", blocksRemaining) // Verify whether it still makes sense to publish the htlc. if blocksRemaining < MinLoopInPublishDelta { s.setState(loopdb.StateFailTimeout) return false, s.persistState(ctx) } // Get fee estimate from lnd. feeRate, err := s.lnd.WalletKit.EstimateFee( ctx, s.LoopInContract.HtlcConfTarget, ) if err != nil { return false, fmt.Errorf("estimate fee: %v", err) } // Transition to state HtlcPublished before calling SendOutputs to // prevent us from ever paying multiple times after a crash. s.setState(loopdb.StateHtlcPublished) err = s.persistState(ctx) if err != nil { return false, err } s.log.Infof("Publishing on chain HTLC with fee rate %v", feeRate) tx, err := s.lnd.WalletKit.SendOutputs(ctx, []*wire.TxOut{{ PkScript: s.htlc.PkScript, Value: int64(s.LoopInContract.AmountRequested), }}, feeRate, ) if err != nil { return false, fmt.Errorf("send outputs: %v", err) } s.log.Infof("Published on chain HTLC tx %v", tx.TxHash()) return true, nil } // waitForSwapComplete waits until a spending tx of the htlc gets confirmed and // the swap invoice is either settled or canceled. If the htlc times out, the // timeout tx will be published. func (s *loopInSwap) waitForSwapComplete(ctx context.Context, htlc *wire.OutPoint, htlcValue btcutil.Amount) error { // Register the htlc spend notification. rpcCtx, cancel := context.WithCancel(ctx) defer cancel() spendChan, spendErr, err := s.lnd.ChainNotifier.RegisterSpendNtfn( rpcCtx, nil, s.htlc.PkScript, s.InitiationHeight, ) if err != nil { return fmt.Errorf("register spend ntfn: %v", err) } // Register for swap invoice updates. rpcCtx, cancel = context.WithCancel(ctx) defer cancel() s.log.Infof("Subscribing to swap invoice %v", s.hash) swapInvoiceChan, swapInvoiceErr, err := s.lnd.Invoices.SubscribeSingleInvoice( rpcCtx, s.hash, ) if err != nil { return fmt.Errorf("subscribe to swap invoice: %v", err) } // checkTimeout publishes the timeout tx if the contract has expired. checkTimeout := func() error { if s.height >= s.LoopInContract.CltvExpiry { return s.publishTimeoutTx(ctx, htlc) } return nil } // Check timeout at current height. After a restart we may want to // publish the tx immediately. err = checkTimeout() if err != nil { return err } htlcSpend := false invoiceFinalized := false for !htlcSpend || !invoiceFinalized { select { // Spend notification error. case err := <-spendErr: return err // Receive block epochs and start publishing the timeout tx // whenever possible. case notification := <-s.blockEpochChan: s.height = notification.(int32) err := checkTimeout() if err != nil { return err } // The htlc spend is confirmed. Inspect the spending tx to // determine the final swap state. case spendDetails := <-spendChan: s.log.Infof("Htlc spend by tx: %v", spendDetails.SpenderTxHash) err := s.processHtlcSpend( ctx, spendDetails, htlcValue, ) if err != nil { return err } htlcSpend = true // Swap invoice ntfn error. case err := <-swapInvoiceErr: return err // An update to the swap invoice occured. Check the new state // and update the swap state accordingly. case update := <-swapInvoiceChan: s.log.Infof("Received swap invoice update: %v", update.State) switch update.State { // Swap invoice was paid, so update server cost balance. case channeldb.ContractSettled: s.cost.Server -= update.AmtPaid // If invoice settlement and htlc spend happen // in the expected order, move the swap to an // intermediate state that indicates that the // swap is complete from the user point of view, // but still incomplete with regards to // accounting data. if s.state == loopdb.StateHtlcPublished { s.setState(loopdb.StateInvoiceSettled) err := s.persistState(ctx) if err != nil { return err } } invoiceFinalized = true // Canceled invoice has no effect on server cost // balance. case channeldb.ContractCanceled: invoiceFinalized = true } case <-ctx.Done(): return ctx.Err() } } return nil } func (s *loopInSwap) processHtlcSpend(ctx context.Context, spend *chainntnfs.SpendDetail, htlcValue btcutil.Amount) error { // Determine the htlc input of the spending tx and inspect the witness // to findout whether a success or a timeout tx spend the htlc. htlcInput := spend.SpendingTx.TxIn[spend.SpenderInputIndex] if s.htlc.IsSuccessWitness(htlcInput.Witness) { s.setState(loopdb.StateSuccess) // Server swept the htlc. The htlc value can be added to the // server cost balance. s.cost.Server += htlcValue } else { s.setState(loopdb.StateFailTimeout) // Now that the timeout tx confirmed, we can safely cancel the // swap invoice. We still need to query the final invoice state. // This is not a hodl invoice, so it may be that the invoice was // already settled. This means that the server didn't succeed in // sweeping the htlc after paying the invoice. err := s.lnd.Invoices.CancelInvoice(ctx, s.hash) if err != nil && err != channeldb.ErrInvoiceAlreadySettled { return err } // TODO: Add miner fee of timeout tx to swap cost balance. } return nil } // publishTimeoutTx publishes a timeout tx after the on-chain htlc has expired. // The swap failed and we are reclaiming our funds. func (s *loopInSwap) publishTimeoutTx(ctx context.Context, htlc *wire.OutPoint) error { if s.timeoutAddr == nil { var err error s.timeoutAddr, err = s.lnd.WalletKit.NextAddr(ctx) if err != nil { return err } } // Calculate sweep tx fee fee, err := s.sweeper.GetSweepFee( ctx, s.htlc.AddTimeoutToEstimator, s.timeoutAddr, TimeoutTxConfTarget, ) if err != nil { return err } witnessFunc := func(sig []byte) (wire.TxWitness, error) { return s.htlc.GenTimeoutWitness(sig) } timeoutTx, err := s.sweeper.CreateSweepTx( ctx, s.height, s.htlc, *htlc, s.SenderKey, witnessFunc, s.LoopInContract.AmountRequested, fee, s.timeoutAddr, ) if err != nil { return err } timeoutTxHash := timeoutTx.TxHash() s.log.Infof("Publishing timeout tx %v with fee %v to addr %v", timeoutTxHash, fee, s.timeoutAddr) err = s.lnd.WalletKit.PublishTransaction(ctx, timeoutTx) if err != nil { s.log.Warnf("publish timeout: %v", err) } return nil } // persistState updates the swap state and sends out an update notification. func (s *loopInSwap) persistState(ctx context.Context) error { // Update state in store. err := s.store.UpdateLoopIn( s.hash, s.lastUpdateTime, loopdb.SwapStateData{ State: s.state, Cost: s.cost, }, ) if err != nil { return err } // Send out swap update return s.sendUpdate(ctx) } // setState updates the swap state and last update timestamp. func (s *loopInSwap) setState(state loopdb.SwapState) { s.lastUpdateTime = time.Now() s.state = state }