package loop import ( "context" "errors" "fmt" "strings" "sync" "sync/atomic" "time" "github.com/btcsuite/btcutil" "github.com/lightninglabs/lndclient" "github.com/lightninglabs/loop/loopdb" "github.com/lightninglabs/loop/lsat" "github.com/lightninglabs/loop/swap" "github.com/lightninglabs/loop/sweep" ) var ( // ErrSwapFeeTooHigh is returned when the swap invoice amount is too // high. ErrSwapFeeTooHigh = errors.New("swap fee too high") // ErrPrepayAmountTooHigh is returned when the prepay invoice amount is // too high. ErrPrepayAmountTooHigh = errors.New("prepay amount too high") // ErrSwapAmountTooLow is returned when the requested swap amount is // less than the server minimum. ErrSwapAmountTooLow = errors.New("swap amount too low") // ErrSwapAmountTooHigh is returned when the requested swap amount is // more than the server maximum. ErrSwapAmountTooHigh = errors.New("swap amount too high") // ErrExpiryTooFar is returned when the server proposes an expiry that // is too soon for us. ErrExpiryTooFar = errors.New("swap expiry too far") // serverRPCTimeout is the maximum time a gRPC request to the server // should be allowed to take. serverRPCTimeout = 30 * time.Second // globalCallTimeout is the maximum time any call of the client to the // server is allowed to take, including the time it may take to get // and pay for an LSAT token. globalCallTimeout = serverRPCTimeout + lsat.PaymentTimeout republishDelay = 10 * time.Second // MinerFeeEstimationFailed is a magic number that is returned in a // quote call as the miner fee if the fee estimation in lnd's wallet // failed because of insufficient funds. MinerFeeEstimationFailed btcutil.Amount = -1 ) // Client performs the client side part of swaps. This interface exists to be // able to implement a stub. type Client struct { started uint32 // To be used atomically. errChan chan error lndServices *lndclient.LndServices sweeper *sweep.Sweeper executor *executor resumeReady chan struct{} wg sync.WaitGroup clientConfig } // ClientConfig is the exported configuration structure that is required to // instantiate the loop client. type ClientConfig struct { // ServerAddress is the loop server to connect to. ServerAddress string // ProxyAddress is the SOCKS proxy that should be used to establish the // connection. ProxyAddress string // SwapServerNoTLS skips TLS for the swap server connection when set. SwapServerNoTLS bool // TLSPathServer is the path to the TLS certificate that is required to // connect to the server. TLSPathServer string // Lnd is an instance of the lnd proxy. Lnd *lndclient.LndServices // MaxLsatCost is the maximum price we are willing to pay to the server // for the token. MaxLsatCost btcutil.Amount // MaxLsatFee is the maximum that we are willing to pay in routing fees // to obtain the token. MaxLsatFee btcutil.Amount // LoopOutMaxParts defines the maximum number of parts that may be used // for a loop out swap. When greater than one, a multi-part payment may // be attempted. LoopOutMaxParts uint32 } // NewClient returns a new instance to initiate swaps with. func NewClient(dbDir string, cfg *ClientConfig) (*Client, func(), error) { store, err := loopdb.NewBoltSwapStore(dbDir, cfg.Lnd.ChainParams) if err != nil { return nil, nil, err } lsatStore, err := lsat.NewFileStore(dbDir) if err != nil { return nil, nil, err } swapServerClient, err := newSwapServerClient(cfg, lsatStore) if err != nil { return nil, nil, err } config := &clientConfig{ LndServices: cfg.Lnd, Server: swapServerClient, Store: store, LsatStore: lsatStore, CreateExpiryTimer: func(d time.Duration) <-chan time.Time { return time.NewTimer(d).C }, } sweeper := &sweep.Sweeper{ Lnd: cfg.Lnd, } executor := newExecutor(&executorConfig{ lnd: cfg.Lnd, store: store, sweeper: sweeper, createExpiryTimer: config.CreateExpiryTimer, loopOutMaxParts: cfg.LoopOutMaxParts, }) client := &Client{ errChan: make(chan error), clientConfig: *config, lndServices: cfg.Lnd, sweeper: sweeper, executor: executor, resumeReady: make(chan struct{}), } cleanup := func() { swapServerClient.stop() } return client, cleanup, nil } // FetchSwaps returns all loop in and out swaps currently in the database. func (s *Client) FetchSwaps() ([]*SwapInfo, error) { loopOutSwaps, err := s.Store.FetchLoopOutSwaps() if err != nil { return nil, err } loopInSwaps, err := s.Store.FetchLoopInSwaps() if err != nil { return nil, err } swaps := make([]*SwapInfo, 0, len(loopInSwaps)+len(loopOutSwaps)) for _, swp := range loopOutSwaps { htlc, err := swap.NewHtlc( GetHtlcScriptVersion(swp.Contract.ProtocolVersion), swp.Contract.CltvExpiry, swp.Contract.SenderKey, swp.Contract.ReceiverKey, swp.Hash, swap.HtlcP2WSH, s.lndServices.ChainParams, ) if err != nil { return nil, err } swaps = append(swaps, &SwapInfo{ SwapType: swap.TypeOut, SwapContract: swp.Contract.SwapContract, SwapStateData: swp.State(), SwapHash: swp.Hash, LastUpdate: swp.LastUpdateTime(), HtlcAddressP2WSH: htlc.Address, }) } for _, swp := range loopInSwaps { htlcNP2WSH, err := swap.NewHtlc( GetHtlcScriptVersion(swp.Contract.ProtocolVersion), swp.Contract.CltvExpiry, swp.Contract.SenderKey, swp.Contract.ReceiverKey, swp.Hash, swap.HtlcNP2WSH, s.lndServices.ChainParams, ) if err != nil { return nil, err } htlcP2WSH, err := swap.NewHtlc( GetHtlcScriptVersion(swp.Contract.ProtocolVersion), swp.Contract.CltvExpiry, swp.Contract.SenderKey, swp.Contract.ReceiverKey, swp.Hash, swap.HtlcP2WSH, s.lndServices.ChainParams, ) if err != nil { return nil, err } swaps = append(swaps, &SwapInfo{ SwapType: swap.TypeIn, SwapContract: swp.Contract.SwapContract, SwapStateData: swp.State(), SwapHash: swp.Hash, LastUpdate: swp.LastUpdateTime(), HtlcAddressP2WSH: htlcP2WSH.Address, HtlcAddressNP2WSH: htlcNP2WSH.Address, }) } return swaps, nil } // Run is a blocking call that executes all swaps. Any pending swaps are // restored from persistent storage and resumed. Subsequent updates will be // sent through the passed in statusChan. The function can be terminated by // cancelling the context. func (s *Client) Run(ctx context.Context, statusChan chan<- SwapInfo) error { if !atomic.CompareAndSwapUint32(&s.started, 0, 1) { return errors.New("swap client can only be started once") } // Log connected node. log.Infof("Connected to lnd node '%v' with pubkey %x (version %s)", s.lndServices.NodeAlias, s.lndServices.NodePubkey, lndclient.VersionString(s.lndServices.Version)) // Setup main context used for cancelation. mainCtx, mainCancel := context.WithCancel(ctx) defer mainCancel() // Query store before starting event loop to prevent new swaps from // being treated as swaps that need to be resumed. pendingLoopOutSwaps, err := s.Store.FetchLoopOutSwaps() if err != nil { return err } pendingLoopInSwaps, err := s.Store.FetchLoopInSwaps() if err != nil { return err } // Start goroutine to deliver all pending swaps to the main loop. s.wg.Add(1) go func() { defer s.wg.Done() s.resumeSwaps(mainCtx, pendingLoopOutSwaps, pendingLoopInSwaps) // Signal that new requests can be accepted. Otherwise the new // swap could already have been added to the store and read in // this goroutine as being a swap that needs to be resumed. // Resulting in two goroutines executing the same swap. close(s.resumeReady) }() // Main event loop. err = s.executor.run(mainCtx, statusChan) // Consider canceled as happy flow. if err == context.Canceled { err = nil } if err != nil { log.Errorf("Swap client terminating: %v", err) } else { log.Info("Swap client terminating") } // Cancel all remaining active goroutines. mainCancel() // Wait for all to finish. log.Debug("Wait for executor to finish") s.executor.waitFinished() log.Debug("Wait for goroutines to finish") s.wg.Wait() log.Info("Swap client terminated") return err } // resumeSwaps restarts all pending swaps from the provided list. func (s *Client) resumeSwaps(ctx context.Context, loopOutSwaps []*loopdb.LoopOut, loopInSwaps []*loopdb.LoopIn) { swapCfg := newSwapConfig(s.lndServices, s.Store, s.Server) for _, pend := range loopOutSwaps { if pend.State().State.Type() != loopdb.StateTypePending { continue } swap, err := resumeLoopOutSwap(ctx, swapCfg, pend) if err != nil { log.Errorf("resuming loop out swap: %v", err) continue } s.executor.initiateSwap(ctx, swap) } for _, pend := range loopInSwaps { if pend.State().State.Type() != loopdb.StateTypePending { continue } swap, err := resumeLoopInSwap(ctx, swapCfg, pend) if err != nil { log.Errorf("resuming loop in swap: %v", err) continue } s.executor.initiateSwap(ctx, swap) } } // LoopOut initiates a loop out swap. It blocks until the swap is initiation // with the swap server is completed (typically this takes only a short amount // of time). From there on further status information can be acquired through // the status channel returned from the Run call. // // When the call returns, the swap has been persisted and will be resumed // automatically after restarts. // // The return value is a hash that uniquely identifies the new swap. func (s *Client) LoopOut(globalCtx context.Context, request *OutRequest) (*LoopOutSwapInfo, error) { log.Infof("LoopOut %v to %v (channels: %v)", request.Amount, request.DestAddr, request.OutgoingChanSet, ) if err := s.waitForInitialized(globalCtx); err != nil { return nil, err } // Calculate htlc expiry height. terms, err := s.Server.GetLoopOutTerms(globalCtx) if err != nil { return nil, err } initiationHeight := s.executor.height() request.Expiry, err = s.getExpiry( initiationHeight, terms, request.SweepConfTarget, ) if err != nil { return nil, err } // Create a new swap object for this swap. swapCfg := newSwapConfig(s.lndServices, s.Store, s.Server) initResult, err := newLoopOutSwap( globalCtx, swapCfg, initiationHeight, request, ) if err != nil { return nil, err } swap := initResult.swap // Post swap to the main loop. s.executor.initiateSwap(globalCtx, swap) // Return hash so that the caller can identify this swap in the updates // stream. return &LoopOutSwapInfo{ SwapHash: swap.hash, HtlcAddressP2WSH: swap.htlc.Address, ServerMessage: initResult.serverMessage, }, nil } // getExpiry returns an absolute expiry height based on the sweep confirmation // target, constrained by the server terms. func (s *Client) getExpiry(height int32, terms *LoopOutTerms, confTarget int32) (int32, error) { switch { case confTarget < terms.MinCltvDelta: return height + terms.MinCltvDelta, nil case confTarget > terms.MaxCltvDelta: return 0, fmt.Errorf("confirmation target %v exceeds maximum "+ "server cltv delta of %v", confTarget, terms.MaxCltvDelta) } return height + confTarget, nil } // LoopOutQuote takes a LoopOut amount and returns a break down of estimated // costs for the client. Both the swap server and the on-chain fee estimator // are queried to get to build the quote response. func (s *Client) LoopOutQuote(ctx context.Context, request *LoopOutQuoteRequest) (*LoopOutQuote, error) { terms, err := s.Server.GetLoopOutTerms(ctx) if err != nil { return nil, err } if request.Amount < terms.MinSwapAmount { return nil, ErrSwapAmountTooLow } if request.Amount > terms.MaxSwapAmount { return nil, ErrSwapAmountTooHigh } height := s.executor.height() expiry, err := s.getExpiry(height, terms, request.SweepConfTarget) if err != nil { return nil, err } quote, err := s.Server.GetLoopOutQuote( ctx, request.Amount, expiry, request.SwapPublicationDeadline, ) if err != nil { return nil, err } log.Infof("Offchain swap destination: %x", quote.SwapPaymentDest) swapFee := quote.SwapFee // Generate dummy p2wsh address for fee estimation. The p2wsh address // type is chosen because it adds the most weight of all output types // and we want the quote to return a worst case value. wsh := [32]byte{} p2wshAddress, err := btcutil.NewAddressWitnessScriptHash( wsh[:], s.lndServices.ChainParams, ) if err != nil { return nil, err } minerFee, err := s.sweeper.GetSweepFee( ctx, swap.QuoteHtlc.AddSuccessToEstimator, p2wshAddress, request.SweepConfTarget, ) if err != nil { return nil, err } return &LoopOutQuote{ SwapFee: swapFee, MinerFee: minerFee, PrepayAmount: quote.PrepayAmount, SwapPaymentDest: quote.SwapPaymentDest, }, nil } // LoopOutTerms returns the terms on which the server executes swaps. func (s *Client) LoopOutTerms(ctx context.Context) ( *LoopOutTerms, error) { return s.Server.GetLoopOutTerms(ctx) } // waitForInitialized for swaps to be resumed and executor ready. func (s *Client) waitForInitialized(ctx context.Context) error { select { case <-s.executor.ready: case <-ctx.Done(): return ctx.Err() } select { case <-s.resumeReady: case <-ctx.Done(): return ctx.Err() } return nil } // LoopIn initiates a loop in swap. func (s *Client) LoopIn(globalCtx context.Context, request *LoopInRequest) (*LoopInSwapInfo, error) { log.Infof("Loop in %v (last hop: %v)", request.Amount, request.LastHop, ) if err := s.waitForInitialized(globalCtx); err != nil { return nil, err } // Create a new swap object for this swap. initiationHeight := s.executor.height() swapCfg := newSwapConfig(s.lndServices, s.Store, s.Server) initResult, err := newLoopInSwap( globalCtx, swapCfg, initiationHeight, request, ) if err != nil { return nil, err } swap := initResult.swap // Post swap to the main loop. s.executor.initiateSwap(globalCtx, swap) // Return hash so that the caller can identify this swap in the updates // stream. swapInfo := &LoopInSwapInfo{ SwapHash: swap.hash, HtlcAddressP2WSH: swap.htlcP2WSH.Address, HtlcAddressNP2WSH: swap.htlcNP2WSH.Address, ServerMessage: initResult.serverMessage, } return swapInfo, nil } // LoopInQuote takes an amount and returns a break down of estimated // costs for the client. Both the swap server and the on-chain fee estimator are // queried to get to build the quote response. func (s *Client) LoopInQuote(ctx context.Context, request *LoopInQuoteRequest) (*LoopInQuote, error) { // Retrieve current server terms to calculate swap fee. terms, err := s.Server.GetLoopInTerms(ctx) if err != nil { return nil, err } // Check amount limits. if request.Amount < terms.MinSwapAmount { return nil, ErrSwapAmountTooLow } if request.Amount > terms.MaxSwapAmount { return nil, ErrSwapAmountTooHigh } quote, err := s.Server.GetLoopInQuote(ctx, request.Amount) if err != nil { return nil, err } swapFee := quote.SwapFee // We don't calculate the on-chain fee if the HTLC is going to be // published externally. if request.ExternalHtlc { return &LoopInQuote{ SwapFee: swapFee, MinerFee: 0, }, nil } // Get estimate for miner fee. If estimating the miner fee for the // requested amount is not possible because lnd's wallet cannot // construct a sample TX, we just return zero instead of failing the // quote. The user interface should inform the user that fee estimation // was not possible. // // TODO(guggero): Thread through error code from lnd to avoid string // matching. minerFee, err := s.lndServices.Client.EstimateFeeToP2WSH( ctx, request.Amount, request.HtlcConfTarget, ) if err != nil && strings.Contains(err.Error(), "insufficient funds") { return &LoopInQuote{ SwapFee: swapFee, MinerFee: MinerFeeEstimationFailed, CltvDelta: quote.CltvDelta, }, nil } if err != nil { return nil, err } return &LoopInQuote{ SwapFee: swapFee, MinerFee: minerFee, CltvDelta: quote.CltvDelta, }, nil } // LoopInTerms returns the terms on which the server executes swaps. func (s *Client) LoopInTerms(ctx context.Context) ( *LoopInTerms, error) { return s.Server.GetLoopInTerms(ctx) }