Orange_FTTP

source/manual/how-tos/orange_fr_fttp.rst

@@ -0,0 +1,124 @@
+**Orange France FTTP IPv4 & IPv6**
+==================================
+
+**Original Author:** Kev Willers
+
+**Introduction**
+-----------------
+This guide is for Orange France FTTP using DHCP to connect (this method currently excludes the users of the PRO package).
+
+The guide deals with just the internet connection. Setting up of TV or Phone is not covered here.
+
+
+**Getting ready to make the connection**
+----------------------------------------
+
+Orange requires that the WAN is configured over VLAN 832. So the first step is to set up the VLAN on the intended WAN nic as shown below
+
+
.. image:: images/OF_image0.png
+	:scale: 100%
+
+and the WAN interface assignment should hence look something like this 
+
+.. image:: images/OF_image1.png
+	:scale: 100% 
+
+**Configuring the WAN Interface**
+---------------------------------
+
+In order to establish the IPv4 and IPv6 connection Orange requires that the correct parameters are passed for the DHCP and DHCP6 
+requests respectively
+
+select options DHCP and DHCPv6 in general configuration
+
+.. image:: images/OF_image2.png
+	:scale: 100% 
+
+**On the DHCP request it is a requirement to pass the following:**
+
+* dhcp-class-identifier "sagem"
+* user-class "+FSVDSL_livebox.Internet.softathome.Livebox3"
+* option-90 00:00:00:00:00:00:00:00:00:00:00:66:74:69:2f:65:77:74:FF:AB:XX:XX 
+  (hex conversion of the the userid supplied by Orange which looks like fti/xxxxxxx)
+.. Note::
+    The eleven leading hex 00 pairs to be prefixed to the converted userID
+
+These parameters should be passed as comma separated options in the 'Send Options' area of there WAN DHCP request 
+
+.. image:: images/OF_image3.png
+	:scale: 100% 
+
+.. Note::
+    It is necessary to specify the following 'Request Options'
+
+* subnet-mask
+* broadcast-address
+* dhcp-lease-time
+* dhcp-renewal-time
+* dhcp-rebinding-time
+* domain-search, routers
+* domain-name-servers
+* option-90
+
+These parameters should be passed as comma separated options in the 'Request Options' area of there WAN DHCP request 
+
+Now for the regional specific part.
+
+Some areas of France require that the DHCP and DHCP6 requests are made with a VLAN-PCP of 6. If you are in one of these regions then 
+this can be done via the 'Option Modifiers'. 
+.. Note::
+    The vlan-parent is the physical WAN interface - igb0, em0 etc.
+
+.. image:: images/OF_image4.png
+	:scale: 100% 
+
+On the DHCP6 request we need to use raw options
+
+Firstly select 'Advanced' and your region needs a VLAN-PCP set it via 'Use VLAN priority' 
+
+.. image:: images/OF_image5.png
+	:scale: 100% 
+
+then add the following options in the 'Send Options' field
+
+* ia-pd 0
+* raw-option 6 00:0b:00:11:00:17:00:18
+* raw-option 15 00:2b:46:53:56:44:53:4c:5f:6c:69:76:65:62:6f:78:2e:49:6e:74:65:72:6e:65:74:2e:73:6f:66:74:61:74:68:6f:6d:65:2e:6c:69:76:65:62:6f:78:33
+* raw-option 16 00:00:04:0e:00:05:73:61:67:65:6d
+* raw-option 11 00:00:00:00:00:00:00:00:00:00:00:66:74:69:2f:65:77:74:FF:AB:XX:XX 
+  (hex conversion of the the userid supplied by Orange which looks like fti/xxxxxxx)
+.. Note::
+    The eleven leading hex 00 pairs to be prefixed to the converted userID
+
+Finally set the Identity Association and Prefix interface as shown
+
+.. image:: images/OF_image6.png
+	:scale: 100% 
+
+Click ‘Save’ and then ‘Apply’.
+
+
+**LAN Interface**
+-----------------
+
+
+Select Interfaces->LAN and set IPV4 to "Static IPv4" and IPv6 Configuration Type to ‘Track
+Interface’
+
+.. image:: images/OF_image7.png
+	:scale: 100% 
+
+
+Finally, set the Track IPv6 Interface to WAN and set the IPv4 address to your chosen address.
+
+
+.. image:: images/OF_image8.png
+	:scale: 100% 
+
+Click ‘Save’ and then ‘Apply’.
+
+It is advisable at this point to reboot the system.
+
+
+
+