diff --git a/source/hardware/sfp_compatibility.rst b/source/hardware/sfp_compatibility.rst new file mode 100644 index 00000000..952cd003 --- /dev/null +++ b/source/hardware/sfp_compatibility.rst @@ -0,0 +1,196 @@ +==================================== +SFP(+) Compatibility +==================================== + +Most OPNsense® appliances feature 10 Gigabit SFP+ cages powered by AMD® `axgbe` to allow +for flexible connectivity. Different SFP(+) transceiver modules can be used to connect to different types of +media (e.g. copper or fiber) depending on your needs. + +Most enterprise & datacenter OPNsense® appliances also feature 25 Gigabit capable SFP28 cages powered by Intel® `ice`. + +Below you can find some general information as well as a list of tested SFP(+)/SFP28 transceiver modules +that are verified to work with OPNsense® appliances. + +.. tip:: + + If you are using an SFP(+)/SFP28 module on one of the OPNsense® appliances that is not listed below but is working + properly, consider submitting a Pull Request to `our documentation `__ to extend the list. + Any contribution is welcome! + +===================================================================================================================== + +.. contents:: Table of Contents + :local: + + +**General Information** +===================================================================================================================== + +There are a lot of transceiver modules available on the market and they are usually one of the following types: + +- Copper RJ45 + +Often used for connectivity up to a distance of 100 meters maximum and are +relatively inexpensive. + +.. warning:: + + RJ45 SFP+ modules (10GBASE-T) can run at high operating temperatures in comparison to Fiber or DAC modules. Only + the datacenter level OPNsense® appliances are equipped with passive cooling for the SFP+ cages. If the ambient + temperature does not exceed 50°C, RJ45 SFP+ modules can be used in all OPNsense® appliances without issue. + +- Single-mode optical fiber (SMF) + +Often used for communication across large distances (100+km) and usually connected with either Simplex-LC or +Duplex-LC OS2 patch cords. It can potentially carry more bandwidth than Multi-mode fiber, but the equipment +needed to use SMF is often more expensive in comparison to MMF. + +- Multi-mode optical fiber (MMF) + +Multi-mode fiber is the alternative for SMF (up to 550M for 10Gb/s), often used for backbone applications in +buildings and usually connected with OM3 Duplex-LC patch cords. + +- Direct-Attach (DAC) + +For short ranges (up to 10M), often a popular choice due to low cost and low latency. + +.. attention:: + + Most transceiver modules are available for purchase with a variety of different programming options for + compatibility with different vendors. Unless specified otherwise, all modules are assumed to have + the generic / MSA standard default programming. + + + +**Axgbe** +===================================================================================================================== + +.. note:: + + 10 Mbit/s is currently not supported by Axgbe. + +-------------------------------------- +1G Single-mode optical fiber +-------------------------------------- + +========= ============================== ======= ========================= +Vendor Type Speed Notes +========= ============================== ======= ========================= +BeanField 100BASE-BX0-D53 100Mb +FlexOptix S.B1312.20.DL BiDi LX 1G Tested module rated for 20km, + other distances are assumed to function properly +FlexOptix S.B1312.10.D 1G Tested module rated for 10km, + other distances are assumed to function properly +FS SFP-FE-BX 100Mb +FS SFP-GE-BX 1G +MikroTik S-53LC20D 1G +TP-Link 1000Base-BX WDM Bi-Directional 1G +Ubiquiti UACC-OM-SM-1G-S 1G +========= ============================== ================================= + +-------------------------------------- +10G Single-mode optical fiber +-------------------------------------- + +========= ============================== ======= ========================= +Vendor Type Speed Notes +========= ============================== ======= ========================= +FlexOptix P.1396.10 SMF 1310nm Duplex-LC 10G Tested module rated for 10km, + other distances are assumed to function properly +FlexOptix P.B1696.10.DA + P.B1696.10.AD 10G Simplex-LC. Two complementary modules are needed. +========= ============================== ======= ========================= + +-------------------------------------- +10G Multi-mode optical fiber +-------------------------------------- + +============= ============================== ======= ========================= +Vendor Type Speed Notes +============= ============================== ======= ========================= +Cisco-Finisar SFP-10G-SR 10G +FS SFP-10GSR-85 10G +FS SFP-10/25GR-85 10G +IBM-Finisar FTLX8571D3BCL-IC 10G +Intel AFBR-709DMZ-IN2 10G +Mellanox MFM1T01A-SR 10G +Ubiquiti UF-MM-10G 10G +Uptimed UP-TR-SR-CI 10G 10G +============= ============================== ======= ========================= + +-------------------------------------- +1G Copper RJ45 +-------------------------------------- + +========== ============================== ============= ========================= +Vendor Type Speed Notes +========== ============================== ============= ========================= +FS SFP-GB-GE-T 10/100/1000Mb +HP (Aruba) Instant On 1G +MikroTik S-RJ01 10/100/1000Mb +StarTech GLCTST 1G +Ubiquiti UF-RJ45-1G 10/100/1000Mb +========== ============================== ============= ========================= + +-------------------------------------- +10G Copper RJ45 +-------------------------------------- + +========== ============================== ============= ========================= +Vendor Type Speed Notes +========== ============================== ============= ========================= +FS SFP-10G-T 10G +Uptimed UP-TR-10G-RJ45-CI 1/2.5/5/10G Will always link at 10G on axgbe, + maximum speed is determined by link partner +========== ============================== ============= ========================= + +-------------------------------------- +10G Direct-Attach +-------------------------------------- + +========== ============================== ============= ========================= +Vendor Type Speed Notes +========== ============================== ============= ========================= +Aruba SFP+ DAC 10G +Cisco SFP-H10GB-CU1M 10G +FS SFPP-PC02 10G +MikroTik XS+DA0001 10G Rated for 1/10/25G, only links on 10G +Netgear AXC761 10G +Startech DACSFP10G1M 10G +Ubiquiti UniFi 1m DAC 10G +========== ============================== ============= ========================= + +**ICE** +===================================================================================================================== + +-------------------------------------- +25G Single-mode optical fiber +-------------------------------------- + +========= ============================== ======= ========================= +Vendor Type Speed Notes +========= ============================== ======= ========================= +FlexOptix P.B1625G.10.ADI 25G Tested module rated for 10km, + other distances are assumed to function properly +========= ============================== ======= ========================= + +-------------------------------------- +25G Multi-mode optical fiber +-------------------------------------- + +========= ============================== ======= ========================= +Vendor Type Speed Notes +========= ============================== ======= ========================= +FlexOptix P.8525G.01 25G +FS SFP28-25GSR-85 25G +Uptimed UP-SFP28-SR-CI 25G +========= ============================== ======= ========================= + +-------------------------------------- +25G Direct-Attach +-------------------------------------- + +========= ============================== ======= ========================= +Vendor Type Speed Notes +========= ============================== ======= ========================= +FlexOptix P.C3025G.H Passive 25G +========= ============================== ======= ========================= diff --git a/source/vendor.rst b/source/vendor.rst index 55bce765..2d0f6b06 100644 --- a/source/vendor.rst +++ b/source/vendor.rst @@ -12,3 +12,4 @@ This chapter contains topics around official OPNsense supplied equipment. hardware/defaults hardware/serial_connectivity hardware/bios + hardware/sfp_compatibility