Remove ':scale: 100%' from images

6 years ago · 5ada8c05f8
parent 113a7ca082
commit 5ada8c05f8
11 changed files with 0 additions and 24 deletions
--- a/source/manual/captiveportal.rst
+++ b/source/manual/captiveportal.rst
@ -7,7 +7,6 @@ but is also widely used in corporate networks for an additional layer of securit
 on wireless or Internet access.

 .. image:: images/hotspot_login.png
-    :scale: 100%

 --------------------
 Typical Applications
@ -27,7 +26,6 @@ task. At the same time it offers additional functionalities, such as:
 * Custom Splash page

 .. image:: images/captiveportal_template_folder.png
-    :scale: 100%

 ---------------
 Zone Management
--- a/source/manual/how-tos/cachingproxy.rst
+++ b/source/manual/how-tos/cachingproxy.rst
@ -36,7 +36,6 @@ To enable caching click on the arrow next to the **General Proxy Settings** to
 see the dropdown menu and click on **Local Cache Settings**.

 .. image:: images/proxy_cache.png
-    :scale: 100%

 Check the **Enable local cache** and click **Apply**.

--- a/source/manual/how-tos/guestnet.rst
+++ b/source/manual/how-tos/guestnet.rst
@ -232,7 +232,6 @@ Let's create a custom landing page, to do so click on the tab **Templates** and
 click on the download icon in the lower right corner ( |download| ).

 .. image:: images/template_download.png
-    :scale: 100%

 Now download the default template, we will use this to create our own.
 Unpack the template zip file, you should have something similar to this:
@ -308,7 +307,6 @@ Hit Upload ( |upload| )
      :width: 100%

 .. |upload| image:: images/btn_upload.png
-      :scale: 100%

 To enable the captive portal on the GUESTNET interface just click on **Apply**.

@ -501,7 +499,6 @@ When done click **Save changes** and the **Apply** to apply the new settings.
 Now users will see the login form as part of your template:

 .. image:: images/cp_voucher_login.png
-    :scale: 100%

 --------------
 Check Sessions
--- a/source/manual/how-tos/ips-feodo.rst
+++ b/source/manual/how-tos/ips-feodo.rst
@ -57,7 +57,6 @@ First apply the configuration by pressing the **Apply** button at the bottom of
 the form.

 .. image:: images/applybtn.png
-    :scale: 100%

 ---------------
 Fetch Rule sets
@ -71,7 +70,6 @@ To do so: select Enabled after each one.
 To download the rule sets press **Download & Update Rules**.

 .. image:: images/downloadbtn.png
-    :scale: 100%

 -----------------------
 Change default behavior
@ -93,7 +91,6 @@ Apply fraud drop actions
 Now press **Download & Update Rules** again to change the behavior to drop.

 .. image:: images/downloadbtn.png
-    :scale: 100%

 ---------------
 Keep up to date
--- a/source/manual/how-tos/ips-geoip.rst
+++ b/source/manual/how-tos/ips-geoip.rst
@ -87,13 +87,11 @@ Apply configuration
 If this is the first GeoIP rule you add then you need to **Download & Update Rules**

 .. image:: images/downloadbtn.png
-    :scale: 100%

 Then apply the configuration by pressing the **Apply** button at the bottom of
 the form.

 .. image:: images/applybtn.png
-    :scale: 100%


 ------------
--- a/source/manual/how-tos/ips-sslfingerprint.rst
+++ b/source/manual/how-tos/ips-sslfingerprint.rst
@ -106,7 +106,6 @@ First apply the configuration by pressing the **Apply** button at the bottom of
 the form.

 .. image:: images/applybtn.png
-    :scale: 100%

 ----------------------------
 Clear Browser Cache and test
--- a/source/manual/how-tos/ipsec-s2s.rst
+++ b/source/manual/how-tos/ipsec-s2s.rst
@ -244,7 +244,6 @@ Advanced Options
 Save your setting by pressing:

 .. image:: images/btn_save.png
-    :scale: 100%

 Now you should see the following screen:

@ -258,7 +257,6 @@ Step 2 - Phase 2 Site A
 Press the button that says '+ Show 0 Phase-2 entries'

 .. image:: images/ipsec_s2s_vpn_p1a_show_p2.png
-    :scale: 100%

 You will see an empty list:

@ -301,19 +299,16 @@ Phase 2 proposal (SA/Key Exchange)
 Save your setting by pressing:

 .. image:: images/btn_save.png
-    :scale: 100%

 -----------------------------

 Enable IPsec for Site A, Select:

 .. image:: images/ipsec_s2s_vpn_p1a_enable.png
-    :scale: 100%

 Save:

 .. image:: images/btn_save.png
-    :scale: 100%

 And Apply changes:

@ -380,7 +375,6 @@ Advanced Options
 Save your setting by pressing:

 .. image:: images/btn_save.png
-    :scale: 100%

 Now you should see the following screen:

@ -439,7 +433,6 @@ Phase 2 proposal (SA/Key Exchange)
 Save your setting by pressing:

 .. image:: images/btn_save.png
-    :scale: 100%

 -----------------------------

@ -451,7 +444,6 @@ Enable IPsec for Site B, Select:
 Save:

 .. image:: images/btn_save.png
-    :scale: 100%

 And Apply changes:

--- a/source/manual/how-tos/proxytransparent.rst
+++ b/source/manual/how-tos/proxytransparent.rst
@ -151,7 +151,6 @@ certificate for each page manually, but for some pages that may not work well un
 not bumped.

 .. image:: images/export_CA_cert.png
-    :scale: 100%

 Import and change trust settings on your favorite OS. For example, on macOS it looks
 like this:
--- a/source/manual/how-tos/user-ldap.rst
+++ b/source/manual/how-tos/user-ldap.rst
@ -88,7 +88,6 @@ to import the users into the local user manager. Go to **System->Access->Users**
 you will see a cloud import icon at the lower right corner of the form.

 .. image:: images/user_cloudimport.png
-   :scale: 100%

 Click on the cloud import icon to start importing users.

--- a/source/manual/install.rst
+++ b/source/manual/install.rst
@ -104,7 +104,6 @@ Depending on you hardware and use case different installation media are provided
 Media Filename Composition
 ------------------------------
 .. blockdiag::
-  :scale: 100%

   diagram {
     default_shape = roundedbox;
--- a/source/manual/vpnet.rst
+++ b/source/manual/vpnet.rst
@ -29,7 +29,6 @@ well known IPsec as well as older (now considered insecure) legacy options such
 L2TP and PPTP.

 .. image:: images/vpn.png
-    :scale: 100%

 .. Note::