Fix typos (#88)

source/manual/captiveportal.rst

@@ -51,8 +51,8 @@ given page Different sources can be used to authenticate a user in a zone:
 Voucher Manager
 ---------------
 OPNsense's Captive Portal has an easy voucher creation system that exports the
-vouchers to a csv file for use with you favorite application. The export allows
-you to print vouchers by merging them with your word or open office template and
+vouchers to a csv file for use with your favorite application. The export allows
+you to print vouchers by merging them with your Microsoft Word or LibreOffice template and
 create a good looking handout with your logo and company style.
 
 -----------------------

source/manual/how-tos/accounting.rst

@@ -13,7 +13,7 @@ this setup, a different operating system might result in some paths
 being different.
 
 User limits on the OPNsense firewall are set right after login, the
-Radius server should tell the firewall how much resources are left for
+Radius server should tell the firewall how many resources are left for
 the user that logged in successfully. A normal login sequence look like
 this:
 

source/manual/how-tos/carp.rst

@@ -261,10 +261,10 @@ these steps:
 
 - Update your secondary unit and wait until it is online again
 - On your primary unit go to **Firewall->Virtual IP's->Status** and hit **Enter Persistent CARP Maintenance Mode**
-- You secondary unit is now *MASTER*, check if all services like DHCP, VPN, NAT are working correct
-- If you ensured the update was fine update your primary unit and hit **Leave Persistent CARP Maintenance Mode**
+- You secondary unit is now *MASTER*, check if all services like DHCP, VPN, NAT are working correctly
+- If you ensured the update was fine, update your primary unit and hit **Leave Persistent CARP Maintenance Mode**
 
-With these steps you will not lose much packets and also your existing connection will be transfered.
+With these steps you will not lose too many packets and your existing connection will be transferred as well.
 Also note that entering persistent mode survives a reboot.
 
 ---------

source/manual/how-tos/guestnet.rst

@@ -72,7 +72,7 @@ Select **Enable Interface** and fill in the following data for our example:
  **MSS**                        (Leave Blank)
  **Speed and duplex**           Default           *You may also select the speed when known*
  **Static IPv4 address**        192.168.200.1/24  *We will use this segment for our guests*
- **IPv4 Upstream Gateway**      None
+ **IPv4 Upstream Gateway**      Auto-detect
 ============================== ================= ==============================================
 
 Press **Save** and then **Apply changes**.
@@ -80,7 +80,7 @@ Press **Save** and then **Apply changes**.
 ------------------------------
 Step 2 - Configure DHCP Server
 ------------------------------
-Go to **Services->DHCP->Server** and click on the tab **GUESTNET**.
+Go to **Services->DHCPv4->[GUESTNET]**.
 
 Fill in the following to setup the DHCP server for our guest net (leave everything
  else on its default setting):
@@ -335,7 +335,7 @@ the form and enter the following details:
  **Description**        pipe_10Mbps_down
 ====================== ===================
 
-Click on **Save changes**.
+Click **Save changes**.
 And add another pipe for the upload traffic.
 
 ====================== ===================

source/manual/how-tos/insight.rst

@@ -16,7 +16,7 @@ powerful.
 
 
 Insight offers a full set of analysis tools, ranging from a graphical overview to
-a csv exporter for further analysis with you favorite spreadsheet.
+a csv exporter for further analysis with your favorite spreadsheet.
 
 
 ---------------