mirror of https://github.com/opnsense/docs
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
159 lines
7.2 KiB
ReStructuredText
159 lines
7.2 KiB
ReStructuredText
==========================================
|
|
IPsec: Setup OPNsense for IKEv2 EAP-RADIUS
|
|
==========================================
|
|
|
|
.. contents:: Index
|
|
|
|
EAP-RADIUS via IKEv2 is nearly the same as EAP-MSCHAPv2, but authentication is done against a Radius instance.
|
|
We assume you have read the first part at
|
|
:doc:`how-tos/ipsec-rw`
|
|
|
|
----------------------------
|
|
Step 1 - Create Certificates
|
|
----------------------------
|
|
|
|
For EAP-RADIUS with IKEv2 you need to create a Root CA and a server certificate for your Firewall.
|
|
|
|
Go to :menuselection:`System --> Trust --> Authorities` and click **Add**. Give it a **Descriptive Name** and as **Method**
|
|
choose **Create internal Certificate Authority**. Increase the **Lifetime** and fill in the fields
|
|
matching your local values. Now go to :menuselection:`System --> Trust --> Certificates` and create a new certificate for
|
|
the Firewall itself. Important is to change the **Type** to server. The Common Name can be the hostname
|
|
of the Firewall and set as **Alternative Name** the FQDN your Firewall how it is known to the WAN side.
|
|
This is most important as your VPN will drop when the FQDN does not match the ones of the certificate.
|
|
|
|
If you already have a CA roll out a server certificate and import
|
|
the CA itself via :menuselection:`System --> Trust --> Authorities` and the certificate with the key in
|
|
:menuselection:`System --> Trust --> Certificates`.
|
|
|
|
---------------------
|
|
Step 2 - Setup Radius
|
|
---------------------
|
|
|
|
If you already have a local Radius server, add a new client with the IP address of your Firewall,
|
|
set a shared secret, go to OPNsense UI to :menuselection:`System --> Access --> Servers` and add a new instance:
|
|
|
|
============================ ================ ====================================
|
|
**Descriptive Name** Name *Give it a name*
|
|
**Type** Radius *This is what we want*
|
|
**Hostname or IP Address** Radius IP *Set the IP of your Radius server*
|
|
**Shared Secret** s3cureP4ssW0rd *Choose a secure password*
|
|
============================ ================ ====================================
|
|
|
|
When you do not have an own Radius instance just use the OPNsense plugin and follow this guide:
|
|
:doc:`how-tos/freeradius`
|
|
|
|
-----------------------
|
|
Step 3 - Mobile Clients
|
|
-----------------------
|
|
First we will need to setup the mobile clients network and authentication source.
|
|
Go to :menuselection:`VPN --> IPsec --> Mobile Clients`
|
|
|
|
For our example will use the following settings:
|
|
|
|
IKE Extensions
|
|
--------------
|
|
========================== ============== ================================================
|
|
**Enable** checked *check to enable mobile clients*
|
|
**User Authentication** Nothing *As we use Radius, no need to select anything*
|
|
**Group Authentication** none *Leave on none*
|
|
**Virtual Address Pool** 10.10.0.0/24 *Enter the IP range for the remote clients*
|
|
========================== ============== ================================================
|
|
|
|
You can select other options, but we will leave them all unchecked for this example.
|
|
|
|
**Save** your settings and select **Create Phase1** when it appears.
|
|
Then enter the Mobile Client Phase 1 setting.
|
|
|
|
-------------------------------
|
|
Step 4 - Phase 1 Mobile Clients
|
|
-------------------------------
|
|
|
|
Phase 1 General information
|
|
---------------------------
|
|
========================== ============= ==================================================
|
|
**Connection method** default *default is 'Start on traffic'*
|
|
**Key Exchange version** V2 *only V2 is supported for EAP-RADIUS*
|
|
**Internet Protocol** IPv4
|
|
**Interface** WAN *choose the interface connected to the internet*
|
|
**Description** MobileIPsec *freely chosen description*
|
|
========================== ============= ==================================================
|
|
|
|
Phase 1 proposal (Authentication)
|
|
---------------------------------
|
|
=========================== ==================== =============================================
|
|
**Authentication method** EAP-RADIUS *This is the method we want here*
|
|
**My identifier** Distinguished Name *Set the FQDN you used within certificate*
|
|
**My Certificate** Certificate *Choose the certificate from dropdown list*
|
|
=========================== ==================== =============================================
|
|
|
|
Phase 1 proposal (Algorithms)
|
|
-----------------------------
|
|
========================== ================ ============================================
|
|
**Encryption algorithm** AES *For our example we will use AES/256 bits*
|
|
**Hash algoritm** SHA1, SHA256 *SHA1 and SHA256 for compatibility*
|
|
**DH key group** 1024, 2048 bit *1024 and 2048 bit for compatibility*
|
|
**Lifetime** 28800 sec *lifetime before renegotiation*
|
|
========================== ================ ============================================
|
|
|
|
Advanced Options are fine by default.
|
|
|
|
**Save** your settings.
|
|
|
|
-------------------------------
|
|
Step 5 - Phase 2 Mobile Clients
|
|
-------------------------------
|
|
Press the button that says '+ Show 0 Phase-2 entries'
|
|
|
|
.. image:: images/ipsec_s2s_vpn_p1a_show_p2.png
|
|
:width: 100%
|
|
|
|
You will see an empty list:
|
|
|
|
.. image:: images/ipsec_s2s_vpn_p1a_p2_empty.png
|
|
:width: 100%
|
|
|
|
Now press the *+* at the right of this list to add a Phase 2 entry.
|
|
|
|
General information
|
|
-------------------
|
|
================= =============== =============================
|
|
**Mode** Tunnel IPv4 *Select Tunnel mode*
|
|
**Description** MobileIPsecP2 *Freely chosen description*
|
|
================= =============== =============================
|
|
|
|
Local Network
|
|
-------------
|
|
=================== ============ ==============================
|
|
**Local Network** LAN subnet *Route the local LAN subnet*
|
|
=================== ============ ==============================
|
|
|
|
Phase 2 proposal (SA/Key Exchange)
|
|
----------------------------------
|
|
=========================== ============== ====================================================
|
|
**Protocol** ESP *Choose ESP for encryption*
|
|
**Encryption algorithms** AES / 256 *For this example we use AES 256*
|
|
**Hash algorithms** SHA1, SHA256 *Same as before, mix SHA1 and SHA256*
|
|
**PFS Key group** off *Most mobile systems do not support PFS in Phase2*
|
|
**Lifetime** 3600 sec
|
|
=========================== ============== ====================================================
|
|
|
|
**Save** your settings and **Enable IPsec**, Select:
|
|
|
|
.. image:: images/ipsec_s2s_vpn_p1a_enable.png
|
|
:width: 100%
|
|
|
|
.. Note::
|
|
|
|
If you already had IPsec enabled and added Road Warrior setup, it is important to
|
|
restart the whole service via services widget in the upper right corner of IPSec pages
|
|
or via :menuselection:`System --> Diagnostics --> Services --> Strongswan` since applying configuration only
|
|
reloads it, but a restart also loads the required modules of strongSwan.
|
|
|
|
------------------------
|
|
Step 6 - Add IPsec Users
|
|
------------------------
|
|
|
|
Go to your RADIUS management console and start adding users!
|
|
If you are using our FreeRADIUS plugin follow the official guide:
|
|
:doc:`how-tos/freeradius`
|