| [ezcoo EZ-SW41H21-KVMU3P 8K 4x1 switch](https://www.easycoolav.com/products/8k-hdmi-kvm-switch-4x1-with-usb30-kvm-4k120hz-hotkey-switch) | ✔ | Does NOT have a control port. MSD Works. Can be managed through key combo (ctrl+ctrl+#)
| [TESmart 8 PORT - HDMI KVM SWITCH](https://buytesmart.com/collections/8-ports) | ✔ | Use OTG with USB 2.0 Hub only, no hotkey support. Switching available with serial or IP-to-serial interface using fixed IP (/31 peer-to-peer addressing supported). Can be managed [via WebUI](tesmart.md) or [CLI tool](https://github.com/bbeaudoin/bash/tree/master/tesmart) |
| [XH-HK4401 4-port HDMI USB KVM Switch](https://www.aliexpress.com/item/4000849336545.html) | ✔ | [Using with PiKVM](xh_hk4401.md) - USB MSD works, requires the HDMI backpower solutions found below |
| [AIMOS 8-port HDMI USB-C KVM Switch](https://www.amazon.de/AIMOS-Umschalter-Tastatur-unterst%C3%BCtzen-verbunden/dp/B08FR5K111/) | ☹ | Similar to Ali's noname model, available in 4/8port editions, has same HDMI bridge boot problem/solution using a Marmitek 312 UHD HDMI splitter. ONLY supports HotKey switching. Limitations are are listed below |
| [Aten CS1758 8-port PS/2 / USB VGA KVM switch](https://www.aten.com/global/en/products/kvm/rack-kvm-switches/cs1758/) | ☹ | Older Aten switches can be had for cheap and can be a viable alternative. Devices are connected via PS/2 so USB media support does not work. The setup relies on a VGA-> HDMI adapter to make the video signal work and there can be issues with unsupported VGA resolutions with some adapters. KVM hotkeys and switching all work and so does mouse and keyboard. |
arch1mede
7 months ago
committed by
GitHub