diff --git a/docs/faq.md b/docs/faq.md
index e3aeae9..68b5887 100644
--- a/docs/faq.md
+++ b/docs/faq.md
@@ -40,11 +40,10 @@ As a first step, we recommend carefully reading our documentation on [GitHub](ht
     DNS=192.168.x.x
     ```
 
-    ??? warning "Do not forget the /24(CIDR), otherwise it will not work and your PiKVM will become unreachable)
-    If you're using Wi-Fi but you don't have `/etc/systemd/network/wlan0.network` file, then first you will need to [`migrate the Wi-Fi settings from `netctl` to `systemd-networkd`](wifi.md).
+    ??? warning "Don't forget the `/24` suffix (CIDR), otherwise it will not work and your PiKVM will become unreachable"
 
 
-??? question "How to disable IPv6 on PiKVM?"
+??? question "How can I disable IPv6 on PiKVM?"
 
     To do this, you need at least KVMD 3.301 installed on your device. If this is not the case, update the OS.
 
diff --git a/docs/on_boot_config.md b/docs/on_boot_config.md
index beffc0f..cf6fe00 100644
--- a/docs/on_boot_config.md
+++ b/docs/on_boot_config.md
@@ -13,6 +13,8 @@ After applying the settings, the file is automatically deleted.
 -----
 ## Setting up Wi-Fi
 
+??? note "Devices based on Raspberry Pi Zero 2 W does not support 5GHz Wi-Fi"
+
 1. Remove the PiKVM memory card. The device must be turned off.
 
 2. Insert the memory card into the computer and mount the first FAT32 partition.
diff --git a/docs/wifi.md b/docs/wifi.md
index 9590a2d..a5c257b 100644
--- a/docs/wifi.md
+++ b/docs/wifi.md
@@ -12,17 +12,7 @@ Alternatively you can connect to the PiKVM via SSH. The built-in Web Terminal (a
     Check out [this guide](on_boot_config.md) guide. It is mandatory if you're using Zero 2 W board.
     It will useful in most other cases, especially if you have physical access to the memory card.
 
-??? note "Moving Wi-Fi settings for OS older than 2021.10.19"
-    Starting from 2021.10.19, the old way to configure Wi-Fi using `netctl` is deprecated.
-    Instead, it is proposed to use a more native path with `systemd-networkd`, which is already used to configure Ethernet.
-    Follow the guide and then delete the old netctl profile:
-
-    ```
-    # rw
-    # systemctl disable netctl-auto@wlan0.service
-    # rm /etc/netctl/wlan0-*
-    # ro
-    ```
+??? note "Devices based on Raspberry Pi Zero 2 W does not support 5GHz Wi-Fi"
 
 
 ## Setting up Wi-Fi manually