Allows the device to go into standby (if available in `/sys/power/state`) to save power.
Adds an entry in the device menu to tune the timeout for standby.
(Shows total standby- and suspend-time in system statistics.)
* The first few capacity reads after connecting to the cover may fail
* The PowerCover may trigger spurious move/add usb_plug uevent,
which translate into Charging events for us.
Instead of blindly lighting up the charging LED on those,
check if the device is actually charging, first.
We should always unschedule suspend before scheduling it again (i.e.,
use rescheduleSuspend ;)).
Fix#8097 (many thanks to @Mel-kior for the detailed repro!)
The hyphenation of a word can be changed from its default
by long pressing for 3 seconds and selecting 'Hyphenate'.
These overrides are stored in a per-language file, i.e:
koreader/settings/user-German.hyph.
That seems like a rather terrible idea to beign with, and that that may actually have fatal consequences.
Re #7738
Co-authored-by: Frans de Jonge <fransdejonge@gmail.com>
Add a new reader module: ReaderScrolling, that exposes
some Scrolling options to the menu (which are to be used
by and implemented in ReaderPaging and ReaderRolling
themselves) and implement some inertial scrolling logic
used by both of them.
Default to "Classic scrolling" which is the expected
behaviour on phones and tablets.
The old CreDocument buggy behaviour is available as
"Turbo scrolling" for both Paging and Rolling documents.
Added a "On release scrolling" option that might be
useful on eInk to avoid dynamic pan/scrolling.
Try to avoid bad interactions between pan and swipe,
cancelling unwanted panning if we ended up doing a
swipe or multiswipe.
* Ensure that going from one to the other tears down the former and
its plugins before instantiating the latter and its plugins.
UIManager: Unify Event sending & broadcasting
* Make the two behave the same way (walk the widget stack from top to
bottom), and properly handle the window stack shrinking shrinking
*and* growing.
Previously, broadcasting happened bottom-to-top and didn't really
handle the list shrinking/growing, while sending only handled the list
shrinking by a single element, and hopefully that element being the one
the event was just sent to.
These two items combined allowed us to optimize suboptimal
refresh behavior with Menu and other Menu classes when
opening/closing a document.
e.g., the "opening document" Notification is now properly regional,
and the "open last doc" option no longer flashes like a crazy person
anymore.
Plugins: Allow optimizing Menu refresh with custom menus, too.
Requires moving Menu's close_callback *after* onMenuSelect, which, eh,
probably makes sense, and is probably harmless in the grand scheme of
things.
* Input: Don't create a new TimeVal object for input frame timestamps, just promote our existing table by assigning it the `TimeVal` metatable.
* TimeVal: Export (const) `zero` & `huge` TimeVal objects, because they're common enough in our codebase. (NOTE: not actually const, that's a Lua 5.4 feature ;p).
* GestureDetector: Explain the behavior of the `last_tevs` & `first_tevs` tables, and why one needs a new object and not the other.
* Speaking of, simplify the copy method for `first_tevs`, because it doesn't need to create a new TimeVal object, we can just reference the original, it's unique and re-assigned for each frame.
* CalibreMetadata: Get rid of the now useless NULL-hunt: here, this was basically looking for `rapidjson.null` to replace them with... `rapidjson.null` :?. IIRC, that's a remnant of a quirk of the previous JSON parser (possibly even the previous, *previous* JSON parser ^^).
* CalibreSearch: Update the actually relevant NULL-hunt to make it explicit: replace JSON NULLs with Lua nils, instead of relying on an implementation detail of Lua-RapidJSON, because that detail just changed data type ;).
* UIManager: Make sure tasks scheduled during the final ZMQ callback are honored. e.g., the Calibre "Disconnect" handler. This happened to mostly work purely by chance before the event loop rework.
* Calibre: Restore a proper receiveCallback handler after receiving a book, in order not to break the "Disconnect" handler's state (and, well, get a working Disconnect handler, period ^^).
* Calibre: Unbreak metadata cache when it's initialized by a search (regression since #7159).
* Calibre: Handle UTC <-> local time conversions when checking the cache's timestamp against the Calibre metadata timestamp.
* Bump base (Unbreak CRe on Android, update RapidJSON)
Requires https://github.com/koreader/koreader-base/pull/1344 & https://github.com/koreader/koreader-base/pull/1346 (fix#7485)
Assorted input fixes:
* Actually handle errors in the "there's a callback timer" input polling loop.
* Don't break timerfd when the clock probe was inconclusive.
Not directly related, but noticed because of duplicate onInputEvent handlers:
* HookContainer: Fix deregistration to actually deregister properly. "Regression" extant since its inception in #2933 (!).
* Made sure the three plugins (basically the trio of AutoThingies ;p) that were using HookContainer actually unschedule their task on teardown.
* ReaderDictionary: Port delay computations to TimeVal
* ReaderHighlight: Port delay computations to TimeVal
* ReaderView: Port delay computations to TimeVal
* Android: Reset gesture detection state on APP_CMD_TERM_WINDOW.
This prevents potentially being stuck in bogus gesture states when switching apps.
* GestureDetector:
* Port delay computations to TimeVal
* Fixed delay computations to handle time warps (large and negative deltas).
* Simplified timed callback handling to invalidate timers much earlier, preventing accumulating useless timers that no longer have any chance of ever detecting a gesture.
* Fixed state clearing to handle the actual effective slots, instead of hard-coding slot 0 & slot 1.
* Simplified timed callback handling in general, and added support for a timerfd backend for better performance and accuracy.
* The improved timed callback handling allows us to detect and honor (as much as possible) the three possible clock sources usable by Linux evdev events.
The only case where synthetic timestamps are used (and that only to handle timed callbacks) is limited to non-timerfd platforms where input events use
a clock source that is *NOT* MONOTONIC.
AFAICT, that's pretty much... PocketBook, and that's it?
* Input:
* Use the <linux/input.h> FFI module instead of re-declaring every constant
* Fixed (verbose) debug logging of input events to actually translate said constants properly.
* Completely reset gesture detection state on suspend. This should prevent bogus gesture detection on resume.
* Refactored the waitEvent loop to make it easier to comprehend (hopefully) and much more efficient.
Of specific note, it no longer does a crazy select spam every 100µs, instead computing and relying on sane timeouts,
as afforded by switching the UI event/input loop to the MONOTONIC time base, and the refactored timed callbacks in GestureDetector.
* reMarkable: Stopped enforcing synthetic timestamps on input events, as it should no longer be necessary.
* TimeVal:
* Refactored and simplified, especially as far as metamethods are concerned (based on <bsd/sys/time.h>).
* Added a host of new methods to query the various POSIX clock sources, and made :now default to MONOTONIC.
* Removed the debug guard in __sub, as time going backwards can be a perfectly normal occurrence.
* New methods:
* Clock sources: :realtime, :monotonic, :monotonic_coarse, :realtime_coarse, :boottime
* Utility: :tonumber, :tousecs, :tomsecs, :fromnumber, :isPositive, :isZero
* UIManager:
* Ported event loop & scheduling to TimeVal, and switched to the MONOTONIC time base.
This ensures reliable and consistent scheduling, as time is ensured never to go backwards.
* Added a :getTime() method, that returns a cached TimeVal:now(), updated at the top of every UI frame.
It's used throughout the codebase to cadge a syscall in circumstances where we are guaranteed that a syscall would return a mostly identical value,
because very few time has passed.
The only code left that does live syscalls does it because it's actually necessary for accuracy,
and the only code left that does that in a REALTIME time base is code that *actually* deals with calendar time (e.g., Statistics).
* DictQuickLookup: Port delay computations to TimeVal
* FootNoteWidget: Port delay computations to TimeVal
* HTMLBoxWidget: Port delay computations to TimeVal
* Notification: Port delay computations to TimeVal
* TextBoxWidget: Port delay computations to TimeVal
* AutoSuspend: Port to TimeVal
* AutoTurn:
* Fix it so that settings are actually honored.
* Port to TimeVal
* BackgroundRunner: Port to TimeVal
* Calibre: Port benchmarking code to TimeVal
* BookInfoManager: Removed unnecessary yield in the metadata extraction subprocess now that subprocesses get scheduled properly.
* All in all, these changes reduced the CPU cost of a single tap by a factor of ten (!), and got rid of an insane amount of weird poll/wakeup cycles that must have been hell on CPU schedulers and batteries..
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
* flash_ui: Yield to the kernel between the HL and the UNHL/CB to let the EPDC do its thing in peace.
* UIManager: Handle nils in task scheduling arguments.
* SkimTo: Use the same, thicker chapter nav icons as ReaderSearch (fix#7326).
* SkimTo: The bookmark toggle button doesn't require a vsync flag.
* Simplify flash_ui handling (by handling the unhighlight pre-callback, c.f., #7262 for more details).
* UIManager: Handle translucent window-level widgets (and those wrapped in a translucent MovableContainer) properly in setDirty directly, making sure what's *underneath* them gets repainted to avoid alpha layering glitches. (This was previously handled via localized hacks).
* Update UIManager's documentation, and format it properly for ldoc parsing, making the HTML docs more useful.
* ReaderView: Reinitialize the various page areas when opening a new document, to prevent poisoning from the previous document.
* Event: Handle nils in an event's arguments.
* CheckButton/RadioButton: Switch to simple inversion to handle highlighting
* CheckButton: Make the highlight span the inner frame's width, instead of just the text's width, if possible.
* AlphaContainer: Fix & simplify, given the UIManager alpha handling.
* MovableContainer: When translucent, cache the canvas bb used for composition.
* Avoid spurious refreshes in a few widgets using various dummy *TextWidgets in order to first compute a text height.
* KeyValuePage: Avoid floats in size computations.
Namely, the Terminal plug-in and its chain of InputDialog on top of each other (via the "Save" button, which opens a whole new fs InputDialog to set the filename, while keeping the file's fs InputDialog open).
* DictQuickLookup: Preserve alpha when switching dict, and scrolling
inside a dict.
* Start moving the NumberPicker alpha hack to Button itself
This makes handling flash_ui easier and saner, avoiding flickering.
* Handle the transparency hack entirely from within Button
* Murder the now unnecessary NumberPicker update_callback hack
* Tweak comments
* And the Button handling made that redundant, too
* Squish debug print
* More comment tweaks
* Reset transparency on scrolling instead of rpeserving it
* Reset alpha when switching dictionaries
* Simplify the pre/post callbakc transparency state handling
And explain why we need to care.
* Give a named reference to ButtonDialog's MovableContainer, so the Button
alpha hack behaves with it
* Document the "self.movable" convention
* Amend that comment a bit
e.g., we don't care much about MultiConfirmBox'w MpvableContainer, as
any button action will close it.
* And make SkimTo's MovableContainer accessible so that Button can grok
that it's translucent
* QuickDictLookup, ImageViewer, NumberPicker: Smarter `update` that will re-use most of the widget's layout instead of re-instantiating all the things.
* SpinWidget/DoubleSpinWidget: The NumberPicker change above renders a hack to preserve alpha on these widgets almost unnecessary. Also fixed said hack to also apply to the center, value button.
* Button: Don't re-instantiate the frame in setText/setIcon when unnecessary (e.g., no change at all, or no layout change).
* Button: Add a refresh method that repaints and refreshes a *specific* Button (provided it's been painted once) all on its lonesome.
* ConfigDialog: Free everything that's going to be re-instatiated on update
* A few more post #7118 fixes:
* SkimTo: Always flag the chapter nav buttons as vsync
* Button: Fix the highlight on rounded buttons when vsync is enabled (e.g., it's now entirely visible, instead of showing a weird inverted corner glitch).
* Some more heuristic tweaks in Menu/TouchMenu/Button/IconButton
* ButtonTable: fix the annoying rounding issue I'd noticed in #7054 ;).
* Enable dithering in TextBoxWidget (e.g., in the Wikipedia full view). This involved moving the HW dithering align fixup to base, where it always ought to have been ;).
* Switch a few widgets that were using "partial" on close to "ui", or, more rarely, "flashui". The intent being to limit "partial" purely to the Reader, because it has a latency cost when mixed with other refreshes, which happens often enough in UI ;).
* Minor documentation tweaks around UIManager's `setDirty` to reflect that change.
* ReaderFooter: Force a footer repaint on resume if it is visible (otherwise, just update it).
* ReaderBookmark: In the same vein, don't repaint an invisible footer on bookmark count changes.
Make Notification have toast=true, and UIManager deal
specifically with such widget:
a "toast" widget gets closed by any event, and let
the event be handled by a lower widget.
This should allow us to not wait or tap to get rid
of a notification, and just go on with what we're
doing.
Also make them have a default timeout of 2s,
used with all existing ones.
* Wherever possible, do an actual dumb invert on the Screen BB instead of repainting the widget, *then* inverting it (which is what the "invert" flag does).
* Instead of playing with nextTick/tickAfterNext delays, explicitly fence stuff with forceRePaint
* And, in the few cases where said Mk. 7 quirk kicks in, make the fences more marked by using a well-placed WAIT_FOR_UPDATE_COMPLETE
* Fix an issue in Button where show/hide & enable/disable where actually all toggles, which meant that duplicate calls or timing issues would do the wrong thing. (This broke dimming some icons, and mistakenly dropped the background from FM chevrons, for example).
* Speaking of, fix Button's hide/show to actually restore the background properly (there was a stupid typo in the variable name)
* Still in Button, fix the insanity of the double repaint on rounded buttons. Turns out it made sense, after all (and was related to said missing background, and bad interaction with invert & text with no background).
* KeyValuePage suffered from a similar issue with broken highlights (all black) because of missing backgrounds.
* In ConfigDialog, only instanciate IconButtons once (because every tab switch causes a full instantiation; and the initial display implies a full instanciation and an initial tab switch). Otherwise, both instances linger, and catch taps, and as such, double highlights.
* ConfigDialog: Restore the "don't repaint ReaderUI" when switching between similarly sized tabs (re #6131). I never could reproduce that on eInk, and I can't now on the emulator, so I'm assuming @poire-z fixed it during the swap to SVG icons.
* KeyValuePage: Only instanciate Buttons once (again, this is a widget that goes through a full init every page). Again, caused highlight/dimming issues because buttons were stacked.
* Menu: Ditto.
* TouchMenu: Now home of the gnarliest unhilight heuristics, because of the sheer amount of different things that can happen (and/or thanks to stuff not flagged covers_fullscreen properly ;p).
* Bump base
https://github.com/koreader/koreader-base/pull/1280https://github.com/koreader/koreader-base/pull/1282https://github.com/koreader/koreader-base/pull/1283https://github.com/koreader/koreader-base/pull/1284
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/284https://github.com/koreader/android-luajit-launcher/pull/285https://github.com/koreader/android-luajit-launcher/pull/286https://github.com/koreader/android-luajit-launcher/pull/287
Rework b66d0be3 and 6205f260 by making that simpler
to comprehend:
- If interruption or search result window is shown in
less than 3 secondes: no specific tweak, a tap outside
will dismiss everything instantaneously.
- If done after 3 seconds: show the interruption or result
window, and discard input for a few 100ms.
- UIManager:discardEvents(): increase a bit default delays.
Add UIManager:discardEvents(), to allow dropping events
for a period of time.
Default duration of 600ms on eInk, 300ms otherwise.
Used when showing the dict result window, so that a tap
happening just when it's being shown won't discard it.
Used with Trapper:confirm()/:info(), to avoid taps made
in a previous processing to dismiss (and so, select the
cancel action) a ConfirmBox not yet painted/visible.
* Don't attempt to restart Nickel when asking for a reboot/shutdown
Use a magic exit code to ID those cases.
* Limit this to Kobo, to avoid breaking potentially existing assumptions
with other platform's startup scripts
Follow up to b90f6db8: allow specifying an other
value for tap interval when the keyboard is shown
(a good value for tap interval on reader and UI
elements might be too long on the keyboard, and
prevent typing fast).
* When closing a widget, stop sending setDirty call for widgets lower on
the stack as soon as we hit a full-screen one.
This prevents inflated refresh regions when closing stuff on top of a
stack of multiple covers_fullscreen widgets (i.e., InfoMessages on top
of the Favorites page on top of the FM, for instance).
And, while we're there, also prevent getting infected by dithered
widgets when they're below a non dithered full-screen widget (the exact
same examples works, if the underlying FM page requires dithering).
This allows for better energy efficiency (no more 50Hz tick poll),
as well as lower input lag / higher precision - touch events are
native linux ones.
In addition, auto off/suspend plugin is used in this mode, as we need
to trigger (timed) sleep / poweroff on our own, since the OS ones
will no longer work whenever koreader has focus.
This is for rooted devices only, and possibly somewhat FW
specific, so enabled only on PB740-2 where it's reasonably tested.
* Enable AutoSuspend plugin on rM
Fix#6769
Re: #6028
* Use the PowerEvent handler on rM
It makes much more sense than the fire & forget & hope for the best
approach copied from the Kindle platform, because we *are* controlling
suspend ourselves (mostly), unlike on Kindle ;).
Fix#6676
* Enable HW inversion on the rM
I mean, we kinda forgot to ever test that, but I don't really see why it
wouldn't work ;).
* Uses bunch of new plumbing in base to configure screen rotations in hardware (koreader normally does this via blit buffer rotations, except for android).
* Some PB specific kludges that used to pollute core/framebuffer_linux are brought into PBs frontend driver.
* Only ask to start an USBMS session when plugged into a USB host on Kobo
Also, fix a typo that broke plugout detection on cervantes
* Bump base (necessary input/KoboUSBMS changes)
https://github.com/koreader/koreader-base/pull/1183
* Enable i18n in KoboUSBMS
* Rejig the "No confirmation" USBMS setting:
In now *only* affects the USB plug in event.
The menu entry will never show the popup (clicking on it should already
be confirmation enough, that, yes, we really would like to do that,
please ;)).
Also, enable said plug in behavior on Cervantes, too ;).
* Add an option to disable USBMS entirely
* Bump base
https://github.com/koreader/koreader-base/pull/1170
* Add an option to *always* flash on chapter boundaries
* Optionally, in flash on chapter boundaries mode, also flash on the *second* page of a chapter.
(There's often a large river at the top of the page on a chapter's first page)
* In CRe, request a flashing update when there is significant image content on the page.
* Register all refresh rate related options in Dispatcher, making them available in Gestures & Profiles.
* Allow locking the gyro to the current screen mode (i.e., orientation).
* Tweak the "sticky rota" option to work both ways
* More rotation constant usage instead of magic numbers
* Fix HW dithered partial refreshes sometimes behaving as if the refreshed
content had moved a few pixels to the side...
Probably a kernel issue with the alignment fixup in the EPDC?
* Get rid of the legacy coordinates fixup
It shouldn't be necessary anymore.
And I'd rather fix the root cause, anyway.
* Bump base
(https://github.com/koreader/koreader-base/pull/1116)
* Missed a few DIVs in #6224
Touchscreen is mirrored in X & Y and has a different resolution from the eink panel.
Uses systemd for time/date/suspend/poweroff/reboot
Two systemd units for platform integration. button-listen is a very
simple launcher.
to-do: add support for wifi by implementing a wpa supplicant dbus client.
Authored-by: Thomas Spurden <tcrs@users.noreply.github.com>
* Allow running Shell/Python scripts from the FM
* Show an InfoMessage before/after running the script
Since we're blocking the UI ;).
* Allow running scripts from the favorites menu, too.
This commit standardizes the various todos around the code a bit in a manner recognized by LDoc.
Besides drawing more attention by being displayed in the developer docs, they're also extractable with LDoc on the command line:
```sh
ldoc --tags todo,fixme *.lua
```
However, whether that particular usage offers any advantage over other search tools is questionable at best.
* and some random beautification
* Make toggling Gyro events more robust
Actually ask to turn it on/off depending on the setting, instead of a
blind toggle
A quick succession of suspend/resume events could otherwise leave it
in an unexpected state (i.e., off when it should have been on).
Specifically, how we ignore it.
No longer do anything specific and potentially racy, and let the
unexpected wakeup handler take care of putting us back to sleep.
Also add an option to only ignore wakeup events from the SleepCover.
Re #5098
Re #5087
[fix, UX] Fix slow keyboard when double tap not disabled
When double tap is not disabled (only ensured in ReaderRolling),
repeated key hits were slowed down by it. This ensures
Input widgets that temporarily overrides it to be disabled
are satisfied.
* Enable HW dithering on supported devices (Clara HD, Forma; Oasis 2, PW4)
* FileManager and co. (where appropriate, i.e., when covers are shown)
* Book Status
* Reader, where appropriate:
* CRe: on pages whith image content (for over 7.5% of the screen area, should hopefully leave stuff like bullet points or small scene breaks alone).
* Other engines: on user-request (in the gear tab of the bottom menu), via the new "Dithering" knob (will only appear on supported devices).
* ScreenSaver
* ImageViewer
* Minimize repaints when flash_ui is enabled (by, almost everywhere, only repainting the flashing element, and not the toplevel window which hosts it).
(The first pass of this involved fixing a few Button instances whose show_parent was wrong, in particular, chevrons in the FM & TopMenu).
* Hunted down a few redundant repaints (unneeded setDirty("all") calls),
either by switching the widget to nil when only a refresh was needed, and not a repaint,
or by passing the appropritate widget to setDirty.
(Note to self: Enable *verbose* debugging to catch broken setDirty calls via its post guard).
There were also a few instances of 'em right behind a widget close.
* Don't repaint the underlying widget when initially showing TopMenu & ConfigDialog.
We unfortunately do need to do it when switching tabs, because of their variable heights.
* On Kobo, disabled the extra and completely useless full refresh before suspend/reboot/poweroff, as well as on resume. No more double refreshes!
* Fix another debug guard in Kobo sysfs_light
* Switch ImageWidget & ImageViewer mostly to "ui" updates, which will be better suited to image content pretty much everywhere, REAGL or not.
PS: (Almost 💯 commits! :D)
* Switch all initial highlights to "fast" update
i.e., everything that does an invert
Plus a few other things that refresh small UI elements onTap
Re #3130
* Tweak refreshtype for a number of widgets:
* Fix iconbutton dimen
* Make touchmenu flash on close & initial menu popup. Full-screen on close.
* Use flashing updates when opening/closing dictionary popup. Full-screen on close.
* Switch FileManager to partial.
It's mostly text, and we want flash promotion there.
* Make configdialog & menu flash on exit
* Make FLWidget flash on close
* virtualkeyboard: flash on layout change & popup.
* Potentially not that great workaround to ensure we actually see the
highlights in the FM's chevrons
* Flash when closing BookStatus Widget
* Optimize away a quirk of the dual "fast" update in touchmenu
* Promote updates to flashing slightly more agressively.
* Document what each refreshtype actually does.
With a few guidelines on their optimal usecases.
* Switch remaining scheduleIn(0.0) to nextTick()
* Tighter scheduling timers
Shaving a hundred ms off UI callbacks...
* Cache FFI C Library namespace
* Ask MuPDF to convert pixmaps to BGR on Kobo
Fix#3949
* Mention koxtoolchain in the README
re #3972
* Kindle: Handle *all* fonts via EXT_FONT_DIR instead of bind mounts insanity
* Make black flashes in UI elements user-configurable
(All or nothing).
* Jot down some random KOA2 sysfs path
* [VirtualKeyboard] Add support for keynaviguation
Also rename the variable "layout" to "keyboard_layout" because conflict
with the layout from the focusmanager
* Make the goto dialog compatible with key naviguation
My solution is to change the order of the widget. The last one will the
virtualkeybard so it catch all the keybinding, and below it, make the
dialog "is_always_active = true" so it can receive touch event.
* Correctly show the virtual keyboard on dpad devices
* change the order to call the virtualKeyboard so it end up on top
* Handle the multi input dialog
* Support reopening the virtualKeyboard by the Press key
* add check focusmanager
* Fix https://github.com/koreader/koreader/issues/3797
* MultiInputDialog : Now work on non touch-device
* Set the virtualkeyboard to be a modal widget
* Fix the layout in multiinputwidget
* Fix for the various combination of
hasKeys,hasDpad,isTouchDevice
* [Focusmanager] Better handling of malformed layout
Navigating the TOC, viewing a full screen image, browsing
reading stats... would call paintTo() on ReaderUI (so, asking
the engine to render the page) or FileManager (so, rendering cover
images) even though their content is hidden.
Widgets registering to UIManager have to explicitely states
they cover the full screen (UIManager can't know, parts of their
dimen may be transparent, e.g. if it is a CenterContainer).
New TrapWidget: invisible full screen widget for catching UI events. Can
optionally display a text message at bottom left of screen (ie: "Loading..."),
used by default by Trapper:dismissable functions when no widget provided.
Added Trapper:dismissableRunInSubprocess() to run a lua function in
a sub-process, allowing it to be dismissed, and returns its return
value(s).
Partial, as it will safe the state when suspending the reader by pressing the power-button.
However, it will still not safe the state when Pocketbooks autoPowerOff-Feature kicks in, as this does not create an event (e.g. no EVT_BACKGROUND) of any kind.
* Clean up device.lua
* Save state on suspend
* Properly create intermediate directories when receiving books from Calibre.
This fixes an issue where you can't receive books except into directories that
already exist on the Kobo, which, in particular, causes problems when your
configuration in Calibre is something like "put books in $Author/$Title.epub"
and you haven't previously synced any books by that author.
* Wake up periodically to process ZMQs if any are registered.
This fixes an issue where if there are any timed events (such as the suspend
timer) in the queue, ZMQ events may not get processed until the timed event
fires, which is a problem when (for example) the suspend timer goes off in
an hour and you have something trying to send a book to the kobo over wifi
*right now*.
With this change, the event loop will wake up every 50ms to check for ZMQ
events and process them if necessary. If there are no ZMQs registered (which
is typical), it uses the original behaviour -- so this won't affect battery
life under normal usage.
* frontlight on kobo: a few fixes
Rewritten to not update NickelConf on every change, and never
if KOBO_SYNC_BRIGHTNESS_WITH_NICKEL = false.
Reintroduce global settings frontlight_intensity and
is_frontlight_on to keep level and state across koreader
sessions.
Fix a few of the remaining issues on kobo light.
Ensure settings are saved when rebooting/powering off from
File browser.
* Ensure untoggle works when starting with light off
Without this change, the device resumed randomly. With this change, the device had not resumed randomly anymore. (Technically speaking, it still randomly resumed, but got suspended immediately.)
* Start battery stat plugin
* BatteryStat & kobolight
* Several minor improvements
* Remove a useless function
* flush settings
* Some review feedbacks
* Resolve review comments
* Remaining Minutes -> Remaining Hours
* Add dump_file
* typo
* realpath
* realpath on folder
* Remove useless os.time()
* Resolve review comments
* warning
* Add BatteryStat.debugging flag
* treat log as txt
* Minor improvement
* Charging hour should be positive
* Use warn instead of info
* onSuspend in Kobo
* Charging events for kobo and kindle
* More events
* dumpOrLog
* Warnings
* Typo
* More space
* Singleton
* slightly format change
* BatteryStat singleton
* Init
* Remove debugging flag
* sleeping percentage is still negative
* Read settings
* Do not need to change was_suspending and was_charging
* Typo
* Remove debugging flag
* Not charging should happen before suspend
* Resolve review comments
* was_suspend and was_charging should be updated each time in onCallback()
This changes the behavior of the powered off transition phase for the
Kobo devices: instead of displaying a confirmation dialog, a screensaver
is used after a 2 seconds press delay.
Users can specify separate directories/files/messages for the powered
off and sleeping states through the `path` and `message` attributes of
the `{poweroff,suspend}_screensaver` settings.
Fixes#2327 and closes#2306.
zwim
NiLuJe
poire-z
Frans de Jonge
zwim
ezdiy
yparitcher
Matias Nitsche
Martín Fernández
Robert
Mustafa Ali Mutlu
Galunid
Matias N
onde2rock
Fabian Müller-Knapp
Ben Kelly
Hzj_jie
Qingping Hou
Bastien Dejean
Zijie He