* Restart KOReader after a crash, after showing a fancy crash recap screen (our very own Gray Screen of Death!).
Kobo only, because it's possibly the platform where getting booted out
of KOReader is the most annoying.
Keeps track of crashes, to be able to give up after a while, in order to
avoid boot loops in the unlikely event of a crash loop on startup.
Adds a dev option to *always* exit KOReader after the crash screen.
* Try to make sure restoreWifiAsync eventually sends a NetworkConnected
event...
re: #5109
* Take a page from @shermp's book, and make sure wpa_supplicant managed to
connect to the AP before acquiring an IP.
Tear down WiFi modules in case of failure.
c.f., https://github.com/shermp/Kobo-UNCaGED/pull/21
* Don't let restore-wifi-async.sh enable WiFi behind our back when we're
killing it to start Nickel...
* Don't even call ping if there's no default gw
* Add a toggle to disable the C blitter in the Dev menu (depends on https://github.com/koreader/koreader-base/pull/882) (never shown if the JIT is disabled, grayed out if the C blitter is not installed)
* Fix a few sizeUtf8Text call sites that were doing a nil check in order to account for the new return type.
* Tweak statusbar handling to avoid spurious sizeUtf8Text warnings when it's hidden, and unify its behavior between being hidden via toggle, and hidden on book open (at least when all-at-once is not enabled).
* c.f., https://github.com/koreader/koreader-base/pull/882 (Android, PB, RGB32 & Legacy Kindle regression fixes).
* Enforce Portrait rotation on the Forma *everywhere*, KSM included.
KSM is currently emulating a bogus rotation, which causes issues with
FBInk, but also happens to be insidiously quirky in weird corner-cases.
* The Great 8bpp Experiment
Swap to 8bpp on Kobo, because we're 'effing grayscale, for pete's sake!
* Always swap to 8bpp, no matter the launch method.
Because it turned out that, even when restarting Nickel, we had to
restore the expected bitdepth ourselves, because pickel/Nickel didn't do
the job completely.
(I'm going to guess the grayscale flag wasn't getting flipped properly).
* Dither every non-transparent icon to the eInk palette
* Make sure hasBGRFrameBuffer is only enabled when the Kobo fb actually is
@ 32bpp...
* Re-process badly grayscaled icons
* And re-grayscale that one w/ gamma correction so the squares show up
better.
* Allow the fbdepth switch to be disabled (in Developer settings).
Also, allow setting debug mode that way.
Also, forcibly disable verbose logging when disabling debug.
* Update setting name to piggyback on the existing check in reader.lua
* Update icons postprocessing info
* Enforce a known rotation on startup, to make sure we handle touch input coordinates properly.
* Proper FrontLight warmth support (thanks to @cairnsh & @pazos in #4291)!
* Fix the PageTurn buttons mapping to match Nickel's defaults
* Properly remap PageTurn buttons depending on the current rotation.
* Actually enable the Mk.7 screen refresh codepath on *all* Mk.7 devices (I'd messed up the device check...).
* Full accelerometer handling (includes a touch of refactoring regarding orientation handling in general).
* Fix insidiously broken USBMS behavior in Nickel after we exit on FW >4.8.
Fix#4291Fix#3002
* Only switch to ondemand when we actually can, and when it's better than the current governor...
This potentially leaves Mk.5 in the lurch, but there's no perfect solution there :/.
* Switch to UI for the unmark event of navigation hints markers
Might help on non-REAGL devices, and doesn't hurt there (re #3983).
* Switch SQLite DBs to WAL
Sounds nice in theory, behaves fine in practice.
* Switch to ondemand CPUFreq governor on Kobo
My H2O boots with the userspace (!!) governor...
Note that the hardware appears to blissfully ignore any of this, because
the stats still show the CPU changing state on its own...
* Handle OTA updates during the restart loop on Kobo/Kindle
So we can actually process OTA updates without ever truly exiting
KOReader (i.e., via the "Restart KOReader" menu entry) ;).
* With a bonus version normalizer fix.
* And a zsync bump/fix to avoid softlocks with OpenStack HTTP frontends (also, pull those from the OTA mirror list).
* Better KOA2 support
* Fix FL
* Add physical pageturn keys
* Add accelerometer support
* Possibly better NaturalLight handling on the Clara
* Fix WiFi module name used in some(?) Mk7 Kobos
* A bunch of kodev fixes
* Link to the WiKi, it's a bit more explainy ;).
* More WiFi trickery for some HW revs
* Fix Rev2 detection under KSM
That's to future-proof it, the other end of this hasn't made it into
current KSM build yet.
* Resync nickel.sh w/ current rcS
We don't have CPU, but we have PLATFORM, which is based on CPU, so,
that'll do :).
* Go back to using rmmod instead of modprobe -r
Functionally identical on current FW, will potentially avoid getting
outsmarted by modprobe if Kobo ever deigns shipping an actually usable
Linux system one day...
* Don't crash if screensavers directory doesn't exist
c.f., https://www.mobileread.com/forums/showpost.php?p=3706979&postcount=2919
* Trim unneeded stuff from startup script
I was somehow convinced I'd already done that...
While we're there, explain why we need to siphon those specific vars
* Fix a stray eth0
-> $INTERFACE
* Be very very sure we have INTERFACE set in our env
re #3936
* Make getFirmwareVersion less fragile on Kobo
Not that we actually use it right now, but, still. :D
* Use the same syntax as the PRODUCT check
* Actually implement getProductId
Instead of a stray c/p ^^
* Properly identify the Rev2/Mark7 variants of existing devices
Namely, the H2O² and Aura SE
Not that the H2O²r2 support is still broken, this just allows us to
implement it cleanyl without breaking handling of the original H2O²
re #3925
* Tweak sleeps a bit around Kobo WiFi modules...
See if that jog things up (re #3936)
* Try harder not to suspend with WiFi on on Kobos
Because otherwise, things go boom. (re #3936)
Regression after bdb82d09c1
TL;DR: That thing is race-y as hell.
The more I play with Kobos, the more it feels like the whole thing's
held together by pieces of fraying strings...
* Flag those scripts as executable in git
Somewhat irrelevant because we'll end up living on a FAT32 drive, but,
still.
* Cleanup Kobo startup script
Support KFMon >= 0.9.5
Don't siphon PRODUCT from nickel, it's exported by rcS, so fmon/KFMon
already inherit it.
Siphon NICKEL_HOME, on the off-chance nickel fails to figure that one
out for itself on restart.
Siphon LANG (This may be a terrible idea, rcS sets LANG to en_US.UTF-8,
while we set LC_ALL to en_US.UTF-8, but I don't know if nickel itself
ever updates LANG, since I have mine set to en_US also ;)).
My secret hope if that everything's working as it should and this ensures
we default to Nickel's locale on fresh installs?
Remove the extra sync on startup, both @Baskerville's fmon and KFMon are
smart enough not to do anything overly stupid, and recent FW versions
have a slightly more resilient DB anyway (rollback journal -> WAL).
This effectively shaves over a second off our startup time.
* Slimmed down the nickel restart script.
Based on current rcS
Scrapped a bucketload of irrelevant & legacy crap, since we're never
bootstrapping nickel, only restarting it.
* Update Kobo install instrcutions.
Point to KSM09, @Baskerville's fmon, and KFMon.
Deprecate legacy fmon, and as such, stop shipping a useless KoboRoot
tarball.
Disable wakeup_count handling, that's often causing more harm than
anything else...
Nickel doesn't even use it, that should have been a hint ;).
Make the logging slightly less confusing.
Add commented out debug features (dumping relevant dmesg output).
Re #2188
When using KFMon, make the reboot on exit user-configurable.
The user can now choose to try to restart Nickel directly, like with
fmon.
For now, we still do a full reboot by default.
To avoid potential issues with USBMS.
Namely, make sure CWD doesn't point to the userstore for persitent
processes.
Make sure wpa_supplicant doesn't try to use our own OpenSSL lib, which,
again, is in the userstore area.
Properly kill our dhcp client invocation on when killing WiFi
Also, some related fixes to the startup script:
Properly kill wpa_supplicant & the dhcp client when we kill
wifi before rebooting to nickel.
Thanks to @Markismus's questions, I realized that some of what i thought
was true, wasn't.
First, pkill is a terrible idea to check for interpreted scripts.
Second, pidof is also potentially not that great for interpreted
scripts, because it'll only work with a shebang, and one that is
following the Linux syntax.
We don't have the full version with the -x to paper over that,
so use pgrep -f instead.
cf.
a736a571d2 (commitcomment-10948910)
for the gory details.
pkill probably only checks the actual name of the binary.
We were checking a shell script, which I'm guessing is not launched
via a shebang, so that name was actually an arg to sh, or something like
that.
Use pidof instead, which matches the full command line.
For some unknowable reason, restarting nickel on exit deadlocks on my
H2O, so, do a full reboot instead, at least *that* works.
I'm probably one of the only people running KO manually anyway...
Compatibility with KSM is resolved. Koreader will now work from any directory it is installed in.
KSM7 tweaks `koreader.sh` line 5 from a hardcoded path to the line used above. I've added the change in line 12 to allow OTA updating.
The commands in networkmgr.lua rely on an assigned value of PLATFORM. As discussed in #1423 this is only the case for child processes of rcS. This seems to be a fine place to check the value of PLATFORM.
It turns out that one of our mupdf patch reads the FONTDIR env var
and uses it in a totally different way so we will use another env var
EXT_FONT_DIR to define external font directory for different platforms.
to support custom font directory for EPUB documents
Now Koreader could find fonts in the "fonts" directory in the USB root
directory of kindle, Kobo and PocketBook devices, thus no need to copy
fonts to "koreader/fonts" directory.
Frans de Jonge
NiLuJe
mezzarobba
Hzj_jie
Qingping Hou
a-kohout
pazos
poire-z
zijiehe
Cosmin Gorgovan
arasyi
HW
Markismus
chrox