Add toltec instructions and simplify wiki

Installation-on-ReMarkable.md

@@ -1,16 +1,41 @@
 ## SSH into your device
 
-0. Windows users will need to install an [OpenSSH Client](https://docs.microsoft.com/en-us/windows-server/administration/openssh/openssh_install_firstuse#installing-openssh-from-the-settings-ui-on-windows-server-2019-or-windows-10-1809). Mac OS and Linux users need no extra software.
+0. Windows users will need to install an [OpenSSH Client](https://docs.microsoft.com/en-us/windows-server/administration/openssh/openssh_install_firstuse#install-openssh-using-windows-settings). MacOS and Linux users need no extra software.
 1. Connect your device via USB
-2. Navigate to `Menu > Settings > Help > Copyright and Licenses`
+2. Find your device password `Menu > Settings > Help > Copyright and Licenses`
-3. Under "GPLv3 Compliance" you will find your username `root`, your IP `10.11.99.1` and your password
+3. Open terminal and run:
-4. Open terminal and run:
 ```
 ssh root@10.11.99.1
 ```
 
 ## Installing
 
+### Installation via Toltec
+1. SSH into your device and install [toltec](https://github.com/toltec-dev/toltec#install-it)
+2. For reMarkable 1:
+```
+opkg install koreader
+```
+3. For reMarkable 2:
+```
+opkg install rm2fb koreader
+```
+4. Edit the default service file to be toltec-compatible:
+```
+sed -i "s|/home/root/koreader/koreader.sh|/opt/bin/koreader|g" /opt/koreader/koreader.service
+```
+5. Copy the service file to the system directory:
+```
+cp -v /opt/koreader/koreader.service /etc/systemd/system/
+```
+6. Launch KOReader:
+```
+systemctl start koreader
+```
+- **Note:** Check for updates from within KOReader as toltec may not have yet indexed the latest release.
+- **Note:** reMarkable firmware updates will delete KOReader's systemd units. Run `toltecctl reenable` and repeat steps 4 and 5 after every firmware update
+
+### Manual installation
 1. Download the [latest release](https://github.com/koreader/koreader/releases) of KOReader
 2. Open terminal and navigate to your downloads folder:
 ```
@@ -24,11 +49,11 @@ scp koreader-remarkable-*.zip root@10.11.99.1:
 ```
 unzip koreader-remarkable-*.zip
 ```
-5. Copy the service file to the system directory::
+5. Copy the service file to the system directory:
 ```
 cp -v koreader/koreader.service /etc/systemd/system/
 ```
-6. reMarkable 2 users must install [rm2fb](https://github.com/ddvk/remarkable2-framebuffer)
+6. reMarkable 2 users must install [rm2fb](https://github.com/ddvk/remarkable2-framebuffer#installation)
 7. Launch KOReader:
 ```
 systemctl start koreader
@@ -37,7 +62,8 @@ systemctl start koreader
 ## Launching
 
 ### Automatic launch
-**Warning:** Make sure KOReader starts successfully before configuring the automatic launch
+**Warning:** Make sure KOReader starts successfully before configuring the automatic launch. If both `xochitl` and `koreader` are disabled, your device will be stuck at "reMarkable is starting". Keep a copy of your password in case you need to troubleshoot.
+
 1. SSH into your device and run:
 ```
 systemctl disable xochitl
@@ -45,18 +71,19 @@ systemctl enable koreader
 ```
 2. Reboot your device
 - To return to Xochitl simply exit KOReader
-- **Note:** Make sure at least one service is enabled. If both `xochitl` and `koreader` are disabled, your device will become stuck at "reMarkable is starting"
+
+### Launch with external launcher
+
+KOReader is supported by the following launchers: [oxide](https://github.com/Eeems/oxide), [draft](https://github.com/dixonary/draft-reMarkable) and [remux](https://rmkit.dev/apps/remux). They can installed via [toltec](https://github.com/toltec-dev/toltec#install-it) e.g. `opkg install oxide`.
 
 ### Launch with middle button
 1. SSH into your device and run:
 ```
-cp -v koreader/button-listen.service /etc/systemd/system/
+cp -v /opt/koreader/button-listen.service /etc/systemd/system/
 systemctl enable --now button-listen
 ```
 2. Reboot your device
-3. Hold down the middle button for 3 seconds to start KOReader
+3. While using Xochitl, hold down the middle button for 3 seconds to start KOReader
-- To return to Xochitl simply exit KOReader
-- **Note:** reMarkable firmware updates will delete KOReader's systemd units so you will have to run `cp -v koreader/*.service /etc/systemd/system/` again after every update
 
 ## Optional