adds [network] section parameter called path-alignment-timeout that allows configring the timeout
for optional name lookup + introset lookup + aligned path build, used by tun endpoint dns, provided
as milliseconds.
Wires up systemd support to configure DNS on startup and when
enabling/disabling exit mode.
On startup (and when turning off an exit) we tell systemd-resolved to
direct .loki and .snode lookups to lokinet (leaving other DNS traffic
alone).
On exit enabling, we reconfigure it to resolve "." (i.e. the root DNS
domain) so that all lookups come into it.
* add lokinet_add_bootstrap_rc function for adding an rc from memory
* prevent stack overflow on error closing connection in quic
* add in memory nodedb
* refactor how convotags are set as active
* add initial stubs for endpoint statistics
* refactor time stuff to be a bit cleaner
* update lnproxy script with more arguments
* wire up last of the quic stuff
* clean up udp packet generation code
* pass EndpointBase not quic tunnel for quic stuff
* add {n,h}uint16_t::FromString
* add nuint_t::FromString
* make AlignedBuffer::IsZero non constant time call for speed
Refactors how quic packets get handled: the actual tunnels now live in
tunnel.hpp's TunnelManager which holds and manages all the quic<->tcp
tunnelling. service::Endpoint now holds a TunnelManager rather than a
quic::Server. We only need one quic server, but we need a separate quic
client instance per outgoing quic tunnel, and TunnelManager handles all
that glue now.
Adds QUIC packet handling to get to the right tunnel code. This
required multiplexing incoming quic packets, as follows:
Adds a very small quic tunnel packet header of 4 bytes:
[1, SPORT, ECN] for client->server packets, where SPORT is our
source "port" (really: just a uint16_t unique quic instance
identifier)
or
[2, DPORT, ECN] for server->client packets where the DPORT is the SPORT
from above.
(This also reworks ECN bits to get properly carried over lokinet.)
We don't need a destination/source port for the server-side because
there is only ever one quic server (and we know we're going to it when
the first byte of the header is 1).
Removes the config option for quic exposing ports; a full lokinet will
simply accept anything incoming on quic and tunnel it to the requested
port on the the local endpoint IP (this handler will come in a following
commit).
Replace ConvoTags with full addresses: we need to carry the port, as
well, which the ConvoTag can't give us, so change those to more general
SockAddrs from which we can extract both the ConvoTag *and* the port.
Add a pending connection queue along with new quic-side handlers to call
when a stream becomes available (TunnelManager uses this to wire up
pending incoming conns with quic streams as streams open up).
Completely get rid of tunnel_server/tunnel_client.cpp code; it is now
moved to tunnel.hpp.
Add listen()/forget() methods in TunnelManager for setting up quic
listening sockets (for liblokinet usage).
Add open()/close() methods in TunnelManager for spinning up new quic
clients for outgoing quic connections.
* add ip6-range option to network section to control which range we want to use for ipv6 traffic
* make ip6-range able to disable ipv6 exits ( i dont like this but eh )
- Make SockAddr endian arguments explicit
- Consolidate port-less contructors and port constructors into one with
a default port of 0.
- Add {h,n}uint128_t ctors for construction from IPv6 addrs
All #ifndef guards on headers have been removed, I think,
in favor of #pragma once
Headers are now included as `#include "filename"` if the included file
resides in the same directory as the file including it, or any
subdirectory therein. Otherwise they are included as
`#include <project/top/dir/relative/path/filename>`
The above does not include system/os headers.
loop->call(...) is similar to the old logic->Call(...), but is smart
about the current thread: if called from within the event loop it simply
runs the argument directly, otherwise it queues it.
Similarly most of the other event loop calls are also now thread-aware:
for example, `call_later(...)` can queue the job directly when called if
in the event loop rather than having to double-queue through the even
loop (once to call, then inside the call to initiate the time).
- removes all the llarp_ev_* functions, replacing with methods/classes/functions in the llarp
namespace.
- banish ev/ev.h to the void
- Passes various things by const lvalue ref, especially shared_ptr's that don't need to be copied
(to avoid an atomic refcount increment/decrement).
- Add a llarp::UDPHandle abstract class for UDP handling
- Removes the UDP tick handler; code that needs tick can just do a separate handler on the event
loop outside the UDP socket.
- Adds an "OwnedBuffer" which owns its own memory but is implicitly convertible to a llarp_buffer_t.
This is mostly needed to take over ownership of buffers from uvw without copying them as,
currently, uvw does its own allocation (pending some open upstream issues/PRs).
- Logic:
- add `make_caller`/`call_forever`/`call_every` utility functions to abstract Call wrapping and
dependent timed tasks.
- Add inLogicThread() so that code can tell its inside the logic thread (typically for
debugging assertions).
- get rid of janky integer returns and dealing with cancellations on call_later: the other methods
added here and the event loop code remove the need for them.
- Event loop:
- redo everything with uvw instead of libuv
- rename EventLoopWakeup::Wakeup to EventLoopWakeup::Trigger to better reflect what it does.
- add EventLoopRepeater for repeated events, and replace the code that reschedules itself every
time it is called with a repeater.
- Split up `EventLoop::run()` into a non-virtual base method and abstract `run_loop()` methods;
the base method does a couple extra setup/teardown things that don't need to be in the derived class.
- udp_listen is replaced with ev->udp(...) which returns a new UDPHandle object rather that
needing gross C-style-but-not-actually-C-compatible structs.
- Remove unused register_poll_fd_(un)readable
- Use shared_ptr for EventLoopWakeup rather than returning a raw pointer; uvw lets us not have to
worry about having the event loop class maintain ownership of it.
- Add factory EventLoop::create() function to create a default (uvw-based) event loop (previously
this was one of the llarp_ev_blahblah unnamespaced functions).
- ev_libuv: this is mostly rewritten; all of the glue code/structs, in particular, are gone as
they are no longer needed with uvw.
- DNS:
- Rename DnsHandler to DnsInterceptor to better describe what it does (this is the code that
intercepts all DNS to the tun IP range for Android).
- endpoint:
- remove unused "isolated network" code
- remove distinct (but actually always the same) variables for router/endpoint logic objects
- llarp_buffer_t
- make constructors type-safe against being called with points to non-size-1 values
- tun packet reading:
- read all available packets off the device/file descriptor; previously we were reading one packet
at a time then returning to the event loop to poll again.
- ReadNextPacket() now returns a 0-size packet if the read would block (so that we can implement
the previous point).
- ReadNextPacket() now throws on I/O error
- Miscellaneous code cleanups/simplifications
- Previous android java and jni code updated to work, but with much love
still needed to make it work nicely, e.g. handling when the VPN is
turned off.
- DNS handling refactored to allow android to intercept and handle DNS
requests as we can't set the system DNS to use a high port
(and apparently Chrome ignores system DNS settings anyway)
- add packet router structure to allow separate handling of specific
intercepted traffic, e.g. UDP traffic to port 53 gets handled by our
DNS handler rather than being naively forwarded as exit traffic.
- For now, android lokinet is exit-only and hard-coded to use exit.loki
as its exit. The exit will be configurable before release, but
allowing to not use exit-only mode is more of a challenge.
- some old gitignore remnants which were matching to things we don't
want them to (and are no longer relevant) removed
- some minor changes to CI configuration
* partial tun code refactor
* take out the trash
* move vpn platform code into llarp/vpn/platform.cpp
* fix hive build
* fix win32
* fix memory leak on win32
* reduce cpu use
* make macos compile
* win32 patches:
* use wepoll for zmq
* use all cores on windows iocp read loop
* fix zmq patch for windows
* clean up cmake for win32
* add uninstall before reinstall option to win32 installer
* more ipv6 stuff
* make it compile
* fix up route poker
* remove an unneeded code block in macos wtf
* always use call to system
* fix route poker behavior on macos
* disable ipv6 on windows for now
* cpu perf improvement:
* colease calls to Router::PumpLL to 1 per event loop wakeup
* set up THEN add addresses
* emulate proactor event loop on win32
* remove excessively verbose error message
* fix issue #1499
* exclude uv_poll from win32 so that it can start up
* update logtag to include directory
* create minidump on windows if there was a crash
* make windows happy
* use dmp suffix on minidump files
* typo fix
* address feedback from jason
* use PROJECT_SOURCE_DIR instead of CMAKE_SOURCE_DIR
* quote $@ in apply-patches in case path has spaces in it
* address feedback from tom
* remove llarp/ev/pipe
* add comments for clairification
* make event loop queue size constant named
* add exit.localhost.loki cname record
* return cname in localhost.loki A/AAAA lookup reply
* correctly handle case where we have no exit
* typofix
* simplify logic
* Should fix some windows service issues
* fix return condition inversion
* Add some Trace level logging
also make the logger actually respect the log level you set.
* event loop should not queue things to itself...
at present, logic thread queue continues until it is empty, so
queueing things onto itself is just wasteful.
* call_later(foreach thing) is better than foreach thing (call later)
also if you already queued those things but they have not happened yet,
there is no sense to queue them to happen again.
* do not queue read on write finish, only on read finish
* failure to start DNS server should be proper startup failure.
without the DNS server working lokinet is...kinda pointless, right?
* format
* don't queue stuff to logic thread if in logic thread
the thing that clears the queue...clears it. So you're just delaying and adding overhead.
* windows unbound thread sleep instead of just busy-waiting
also clang-format decided I can't have a blank line for some reason...
* fix unbound async worker on windows
* add some dns txt records for stuff we want to expose
* fix txt records
* txt records for snode info
* dont send cname as it mangles the response
* check for 3 parts not 3 characters
* initial relay side lns
* fix typo
* add reserved names and refactor test for dns
* lns name decryption
* all wired up (allegedly)
* refact to use service::EncryptedName for LNS responses to include nonce with ciphertext
* fully rwemove tag_lookup_job
* replace lns cache with DecayingHashTable
* check for lns name validity against the following rules:
* not localhost.loki, loki.loki, or snode.loki
* if it contains no dash then max 32 characters long, not including the .loki tld (and also assuming a leading subdomain has been stripped)
* These are from general DNS requirements, and also enforced in
registrations:
* Must be all [A-Za-z0-9-]. (A-Z will be lower-cased by the RPC call).
* cannot start or end with a -
* max 63 characters long if it does contain a dash
* cannot contain -- in the third and fourth characters unless it starts with xn--
* handle timeout in name lookup job by calling the right handler with std::nullopt
* fix up macos route poker logic
* fix typo
* use string_view
* add forgotten header
* full paths
* add debugging
* catch exception on adding route
* workarround for macos
* typofix
* typofix
* fix for macos
* fix command for macos
* because we autopoke remove explicit route poking in rpc
* probably final fix of macos route poking
* split routes instead of deleting them
* dynamic route poking
* move log statement for introset lookup and dont consider bad sessions as able to send
* send convotag reset frame when we have no session
* add exit map to rpc
* use split_any
* update loki-mq submodule for tuple support
* srv record reply implementation
still need to encode srv records into intro sets / router contacts
as well as decode from them and match against queried service.proto
* inverted condition fix in config code
* SRV record struct (de-)serialization for intro sets
* parsing and using srv records from config (for/in introsets)
* adopt str utils from core and use for srv parsing
* changes to repeat requests
no longer drop repeat requests on the floor, but do not make
an *actual* request for them if one is in progress.
do not call reply hook for each reply for a request, as
each userland request is actually made into several lokinet
requests and this would result in duplicate replies.
* fetch SRVs from introsets for .loki
* make format
* dns and srv fixes, srv appears to be working
* use exceptions when fetching identity key instead of std::optional, will throw on fail
* fix up config options for endpoint auth and add better docs
* add llarp::serive::AuthType enum for controlling what kind of endpoint auth to use
* rework net code for ip ranges to be cleaner
* clean up endpoint auth code
* refactor config to validate network configs before setting up endpoints
* remove buildone from path/pathbuilder.cpp so we don't spam connection attempts
It was a workaround for pre-C++17 std::string which didn't support
passing a string_view to various functions/operators. There's only one
place left that needs an explicit conversion, and that's where it is
used as a map key; so just be explicit there and remove llarp::str()
everywhere else.
- Move IPRange into its own net/ip_range.hpp
- Move the static net::IPPacket::TruncateV6, etc. functions to free
net::TruncateV6, etc. functions (now from net/ip.hpp instead of
net/ip_packet.hpp).
- Make net::TruncateV6 and net::ExpandV4 constexpr.
- Add IPRange::FromIPv4 factory function (to replace the iprange_ipv4
free function)
This commit reflects changes to clang-format rules. Unfortunately,
these rule changes create a massive change to the codebase, which
causes an apparent rewrite of git history.
Git blame's --ignore-rev flag can be used to ignore this commit when
attempting to `git blame` some code.
The logic here wasn't quite right and was returning an A record in
response to an AAAA lookup.
This returns nothing, which is better, but not quite enough: this gives
empty responses, which produces warnings in host/dig.
Jeff Becker
Jason Rhinelander
Thomas Winget
Stephen Shelton
Rick V