mirror of https://github.com/pikvm/pikvm
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
17 lines
1.1 KiB
Markdown
17 lines
1.1 KiB
Markdown
With this part, you will be able to remotely turn on, turn off and restart your computer!
|
|
|
|
* *x4* MOSFET relays [OMRON G3VM-61A1](https://www.digikey.com/products/en?keywords=G3VM-61A1)
|
|
or [OMRON G3VM-61AY1](https://www.digikey.com/products/en?keywords=G3VM-61AY1).<br>
|
|
*Don't use random relay modules or random optocouplers! Some of these may not be sensitive enough
|
|
for the Raspberry Pi, some others may be low-level controlled. Either use relays that are activated by a high logic level,
|
|
or follow the design provided and buy an OMRON. See details [here](https://github.com/pikvm/pikvm/issues/13).*
|
|
* *x4* 390 Ohm resistors (see [here](https://github.com/pikvm/pikvm/issues/46) for alternatives).
|
|
* *2x* 4.7 kOhm resistors.
|
|
* *x10+* dupont wires male-male.
|
|
* *x1* a breadboard.
|
|
* *various* wires for the breadboard.
|
|
|
|
This can be partially replaced by using [Wake-on-LAN](wol.md) in the software, but it will not allow
|
|
to reboot a hung system, and it is not as reliable as an ATX controller. Sometimes the Wake-on-LAN
|
|
on the host just stops working, for its own or network reasons.
|