I've emailed with PocketBook about the problem with Wifi on the newer models. They explained the wrong constant was being used:
> Dear Robert,
>
> Thank you for choosing Pocketbook.
> Wi-Fi Connection" enabled when no connection:
> https://github.com/koreader/koreader/issues/8617
> The problem is in incorrect usage of constant. You should use flag NET_CONNECTED with bit AND operation as shown in example below.
>
> function NetworkMgr:isWifiOn()
> local state = inkview.QueryNetwork()
> return band(state, C.NET_CONNECTED) ~= 0
> end
>
> Inkpad3 Wifi Standby
> https://github.com/koreader/koreader/issues/4747
> the same solution for this issue
Related issues:
https://github.com/koreader/koreader/issues/8617https://github.com/koreader/koreader/issues/4747
Since I made the previous hack and their suggestion seems to work on the PB741 color. I've made this PR to remove my hack.
It might be wise to also test this fix on older models.
* The first few capacity reads after connecting to the cover may fail
* The PowerCover may trigger spurious move/add usb_plug uevent,
which translate into Charging events for us.
Instead of blindly lighting up the charging LED on those,
check if the device is actually charging, first.
Implement it on the Kobo Sage, for the PowerCover
TouchMenu: Display auxiliary battery status
Kobo: More accurately report the PowerCover's charging status
i.e., try to actually figure out if the auxiliary battery is charging
instead of just checking the reader's battery (because that one will
often swap between the charging and discharging state as it drains the
aux battery...).
PowerD: Use a cached timestamp when doing battery pull checks
Fixes#4747.
Apparently, inkview.NetConnect() doesn’t enable the Wi-Fi on its own,
this results in a failure if the device has been put into the sleep or
standby mode, when the Wi-Fi hardware is powered down.
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Wrap document opening and re-renderings (which can block
the app for some time) with setIgnoreInput() to avoid ANR
on Android.
Any setting update that could possibly cause a re-rendering
should send the UpdatePos event, to ensure the re-rendering
happens in ReaderRolling:onUpdatePos() where precautions
are taken to avoid ANR.
screen.
Otherwise, on the Sage, weird flash glitches may happen, depending on
what was on screen...
(e.g., there's some weird update merging shenanigans going on
despite those updates being flagged NO_MERGE...).
cores
* Only keep a single core online most of the time.
* Device: Add an enableCPUCores method to allow controlling the amount of
online CPU cores.
* Move the initial core onlining setup to Kobo:init, instead of the startup script.
* Enable two CPU cores while hinting new (e.g., cache miss) pages in PDF land.
* Enable two CPU cores while processing book metadata.
* Drive-by fix to isolate the DocCache pressure check to KoptInterface
and actually apply it when it matters most (e.g., k2pdfopt stuff).
We should always unschedule suspend before scheduling it again (i.e.,
use rescheduleSuspend ;)).
Fix#8097 (many thanks to @Mel-kior for the detailed repro!)
It turns out that the kernel needs a little push now that the dedicated
wifi power control module is gone ;).
Issue was only exposed if you booted KOReader while the Wi-Fi was down.
* Decode EV_KEY:KEY_BATTERY
* Input: Only drop hovering *pen* events.
There are currently too many broken 0-pressure *finger* events being
reported on the Elipsa, making a dumb rejection highly annoying.
* Bump base
https://github.com/koreader/koreader-base/pull/1393
* Rely on actual events to detect loss of contact for the "snow"
protocol.
Allows simplifying the whole thing.
* Use `ipairs` over `pairs` for pure arrays.
The hyphenation of a word can be changed from its default
by long pressing for 3 seconds and selecting 'Hyphenate'.
These overrides are stored in a per-language file, i.e:
koreader/settings/user-German.hyph.
Notification: adds some functions so it can be used as
a notification manager.
Have various bits of code emitting events that may generate
notifications advertize themselves as the source for following
notifications.
Add a menu to allow selecting some subsets of sources
to show or hide.
Add a new reader module: ReaderScrolling, that exposes
some Scrolling options to the menu (which are to be used
by and implemented in ReaderPaging and ReaderRolling
themselves) and implement some inertial scrolling logic
used by both of them.
Default to "Classic scrolling" which is the expected
behaviour on phones and tablets.
The old CreDocument buggy behaviour is available as
"Turbo scrolling" for both Paging and Rolling documents.
Added a "On release scrolling" option that might be
useful on eInk to avoid dynamic pan/scrolling.
Try to avoid bad interactions between pan and swipe,
cancelling unwanted panning if we ended up doing a
swipe or multiswipe.
We've managed to trip a few of those on dimen fields post-init but
pre-paintTo in a few weird coner-cases, a point at which dimen is often
nil.
ConfigDialog: Deal with that very thing in update()
Fix#7656
* Input: Don't create a new TimeVal object for input frame timestamps, just promote our existing table by assigning it the `TimeVal` metatable.
* TimeVal: Export (const) `zero` & `huge` TimeVal objects, because they're common enough in our codebase. (NOTE: not actually const, that's a Lua 5.4 feature ;p).
* GestureDetector: Explain the behavior of the `last_tevs` & `first_tevs` tables, and why one needs a new object and not the other.
* Speaking of, simplify the copy method for `first_tevs`, because it doesn't need to create a new TimeVal object, we can just reference the original, it's unique and re-assigned for each frame.
* TimeVal: Log the results of the COARSE probes in debug logs
* GestureDetector: Print details of failed clock probes in debug logs
* GestureDetector: Skip the BOOTTIME probe when CLOCK_BOOTTIME is unsupported.
* Input: Decode ABS_DISTANCE events in debug logs
* Get rid of duplicated <linux/input.h> constants, use the FFI module everywhere (re #7536)
* Kobo: Get rid of the `touch_alyssum_protocol` quirk. Replace it by setting `main_finger_slot` to `1`, like on the H2O.
The Wacom pen reports sane CLOCK_REALTIME timestamps, but the Touchscreen reports timestamps frozen at the boot time ts (in REALTIME) :s.
So, make everyone use synthetic CLOCK_MONOTONIC timestamps in order to make gesture detection behave.
Requires https://github.com/koreader/koreader-base/pull/1344 & https://github.com/koreader/koreader-base/pull/1346 (fix#7485)
Assorted input fixes:
* Actually handle errors in the "there's a callback timer" input polling loop.
* Don't break timerfd when the clock probe was inconclusive.
Not directly related, but noticed because of duplicate onInputEvent handlers:
* HookContainer: Fix deregistration to actually deregister properly. "Regression" extant since its inception in #2933 (!).
* Made sure the three plugins (basically the trio of AutoThingies ;p) that were using HookContainer actually unschedule their task on teardown.
* Actually load librt properly on old Linux systems (fix#7472)
* Made sure SDL & Android honored timeouts properly in some edgy (or not so edgy, in SDL's case) cases (c.f., https://github.com/koreader/koreader-base/pull/1343).
* Try harder not to consume a timer callback when the timerfd backend is in use and `select` timed out *not* because of a timerfd expiring. This would take some particularly heinous timing to reproduce (e.g., a timerfd set, but a task deadline expiring *before* it). May or may not help with #7473.
* Decode `BTN_` KEY codes in verbose debug logs.
* Fix MultiTouch on the H2O (GestureDetector was hard-coding the two slots as 0 & 1, but the H2O kernel is a special snowflake that doesn't use slot 0, instead switching to slot 1 & 2).
* ReaderDictionary: Port delay computations to TimeVal
* ReaderHighlight: Port delay computations to TimeVal
* ReaderView: Port delay computations to TimeVal
* Android: Reset gesture detection state on APP_CMD_TERM_WINDOW.
This prevents potentially being stuck in bogus gesture states when switching apps.
* GestureDetector:
* Port delay computations to TimeVal
* Fixed delay computations to handle time warps (large and negative deltas).
* Simplified timed callback handling to invalidate timers much earlier, preventing accumulating useless timers that no longer have any chance of ever detecting a gesture.
* Fixed state clearing to handle the actual effective slots, instead of hard-coding slot 0 & slot 1.
* Simplified timed callback handling in general, and added support for a timerfd backend for better performance and accuracy.
* The improved timed callback handling allows us to detect and honor (as much as possible) the three possible clock sources usable by Linux evdev events.
The only case where synthetic timestamps are used (and that only to handle timed callbacks) is limited to non-timerfd platforms where input events use
a clock source that is *NOT* MONOTONIC.
AFAICT, that's pretty much... PocketBook, and that's it?
* Input:
* Use the <linux/input.h> FFI module instead of re-declaring every constant
* Fixed (verbose) debug logging of input events to actually translate said constants properly.
* Completely reset gesture detection state on suspend. This should prevent bogus gesture detection on resume.
* Refactored the waitEvent loop to make it easier to comprehend (hopefully) and much more efficient.
Of specific note, it no longer does a crazy select spam every 100µs, instead computing and relying on sane timeouts,
as afforded by switching the UI event/input loop to the MONOTONIC time base, and the refactored timed callbacks in GestureDetector.
* reMarkable: Stopped enforcing synthetic timestamps on input events, as it should no longer be necessary.
* TimeVal:
* Refactored and simplified, especially as far as metamethods are concerned (based on <bsd/sys/time.h>).
* Added a host of new methods to query the various POSIX clock sources, and made :now default to MONOTONIC.
* Removed the debug guard in __sub, as time going backwards can be a perfectly normal occurrence.
* New methods:
* Clock sources: :realtime, :monotonic, :monotonic_coarse, :realtime_coarse, :boottime
* Utility: :tonumber, :tousecs, :tomsecs, :fromnumber, :isPositive, :isZero
* UIManager:
* Ported event loop & scheduling to TimeVal, and switched to the MONOTONIC time base.
This ensures reliable and consistent scheduling, as time is ensured never to go backwards.
* Added a :getTime() method, that returns a cached TimeVal:now(), updated at the top of every UI frame.
It's used throughout the codebase to cadge a syscall in circumstances where we are guaranteed that a syscall would return a mostly identical value,
because very few time has passed.
The only code left that does live syscalls does it because it's actually necessary for accuracy,
and the only code left that does that in a REALTIME time base is code that *actually* deals with calendar time (e.g., Statistics).
* DictQuickLookup: Port delay computations to TimeVal
* FootNoteWidget: Port delay computations to TimeVal
* HTMLBoxWidget: Port delay computations to TimeVal
* Notification: Port delay computations to TimeVal
* TextBoxWidget: Port delay computations to TimeVal
* AutoSuspend: Port to TimeVal
* AutoTurn:
* Fix it so that settings are actually honored.
* Port to TimeVal
* BackgroundRunner: Port to TimeVal
* Calibre: Port benchmarking code to TimeVal
* BookInfoManager: Removed unnecessary yield in the metadata extraction subprocess now that subprocesses get scheduled properly.
* All in all, these changes reduced the CPU cost of a single tap by a factor of ten (!), and got rid of an insane amount of weird poll/wakeup cycles that must have been hell on CPU schedulers and batteries..
* Re-implement the PB fb fixup insanity
It's apparently still necessary on a number of devices.
Fix#7072
* Bump base
(Fix FBInk on the same devices, for another reason).
* Unify logging with AutoSuspend (e.g., keep ourselves to showing the delay in seconds, not the raw timestamp, as that's way harder to interpret, and the RTC module and/or logger will do that for us when the time comes).
* Speaking of, minor revamp of RTC related logging to make it more human-readable.
* On Kobo, if we hit the unexpected wakeup limit, re-engage AutoSuspend's *suspend* check, so that the device has a chance to poweroff instead of being kept awake.
* Hold "Wi-Fi connection" to show network connection options.
* Honor backend connections (e.g., if wpa_supplicant found a matching AP in its own config first).
* When user clicks "Wi-Fi connection" in menu, only prompt if state is ambiguous.
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
Otherwise, ScreenSaver handling doesn't work, duh'.
I have no idea how I managed to get that working the last time I tested
it :?.
Possibly I tested the final code on a K4 and not a K3?
Fix#7333
previously: warm light stays at 100% for 3 hours and then drops by 50% per hour
now: warm light stays at 100% for 4 hours and then drops by 15% per hour
Make Notification have toast=true, and UIManager deal
specifically with such widget:
a "toast" widget gets closed by any event, and let
the event be handled by a lower widget.
This should allow us to not wait or tap to get rid
of a notification, and just go on with what we're
doing.
Also make them have a default timeout of 2s,
used with all existing ones.
platform: do not pass a directory on the command line.
The home directory will be properly set by Device.home_dir.
It was sometimes crashing when opened with no args.
Fixes: #7049
* Modernize jit syntax
It's built-in, no need for a require anymore.
* Flag Android should_restrict_JIT again
It's mildly helpful at putting off the inevitable.
(very, very, very, very mildly).
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/281
* Make switching *back* to the default DPI via auto actually work
properly.
eg., by actually setting DPI back to defaults, and clearing the override
flag.
* Bump base to pickup https://github.com/koreader/koreader-base/pull/1258
* Warn on restart if the startup script has been updated, because a restart will not reload it.
* Also warn right after the update if it contained a startup script update...
* Use a CRe set* method when toggling nightmode
This ensures it gets flagged as add_reset by the call cache, and that
CRe will actually re-render, as it's necessary if nightmode_images is
enabled (the default).
Fix#6845
* Prevent ReaderHighlight:onTap from running ReaderHighlight:clear when
it's unnecessary.
Avoiding a clearSelection call in CRe that could invalidate the cache
and cause unnecessary redraws.
* Don't store empty highlight arrays when all HLs on a page have
been deleted
- Lcd devices won't use the SurfaceView, just the good old native content/window (except AndroidTv and ChromeOS)
- All android dialogs will be presented with Material Design on recent devices.
- Added an option to device settings to manage application battery optimization.
- Permissions that require the user to go to a settings page will be presented with a native android dialog.
- bump android-luajit-launcher
- Changes under the hood: koreader/android-luajit-launcher#257
Follow up to b90f6db8: allow specifying an other
value for tap interval when the keyboard is shown
(a good value for tap interval on reader and UI
elements might be too long on the keyboard, and
prevent typing fast).
* Fix initial tap on the H2O
There's no slot 0, so make sure the initialState doesn't get confused by input's init data that otherwise assumes the main slot is 0
* handle onDestroy
we need it if killed by the system (ie: battery optimizations or OOM)
we need it to exit the lua VM when we call finish() from Kotlin
This prevents us for being trapped into a zombie state
On pocketbook, update modes are not as clear cut due to overall
chipset and kernel version mess. Inkview solves this by always
using the slowest (and safe) GC16 waveform. We now do that too
by default.
Slow updates suck though, so there's now a menu entry to configure
it for speed (with mild artifacts at best, kernel panic at worst).
This is a generic interface (any eink Screen can announce support).
The driver may interpret the slow/fast range however they want.
On devices where the event time is the uptime (time since
boot), we don't need to trash it and use TimeVal:now()
and lose precision. We can still use these times for
relative delays and durations computations, which is
mostly all we use them for.
We just need a real clock time in GestureDetector for
two timers (long-press and double tap), where we do
the event time type detection on the first event, on
all devices.
This allows for better energy efficiency (no more 50Hz tick poll),
as well as lower input lag / higher precision - touch events are
native linux ones.
In addition, auto off/suspend plugin is used in this mode, as we need
to trigger (timed) sleep / poweroff on our own, since the OS ones
will no longer work whenever koreader has focus.
This is for rooted devices only, and possibly somewhat FW
specific, so enabled only on PB740-2 where it's reasonably tested.
* PB Crash Screen:
* We don't actually support the "tap to restart now" behavior, it's a
plain sleep.
* Remove CBB toggling leftovers missed in #6696Fix#6780
* Enable AutoSuspend plugin on rM
Fix#6769
Re: #6028
* Use the PowerEvent handler on rM
It makes much more sense than the fire & forget & hope for the best
approach copied from the Kindle platform, because we *are* controlling
suspend ourselves (mostly), unlike on Kindle ;).
Fix#6676
* Enable HW inversion on the rM
I mean, we kinda forgot to ever test that, but I don't really see why it
wouldn't work ;).
* In icons mode, just use two different icons to display Wi-Fi status
* Enable Wi-Fi status icon on Kobo & Cervantes, too
* Refresh footer on (dis)connect if the Wi-Fi status item is enabled
The differences between Allwinner/MXC matter surprisingly little in practice, it's not even worth
it to bother the base mxc driver with it. Instead, frontend can make some informed choice by
probing for the hardware and tweaking requested device caps accordingly.
On Allwinner B288, we disable both hwrot (done in software in kernel and terribly, ie not worth it)
and hwinverse (no support whatsoever). On NXT we'll keep both on, as the kernel driver seems
to be using the hardware properly .
CBB now handles nightmode correctly (by deferring to Lua), so we no longer
need to do monkey dances about disabling it when hw invert is missing.
canUseCBB cap is resolved by generic device re-configuring blitbuffer
on the go, so as to avoid repeating the same thing in every device driver.
The dev setting can now flip cbb on the go, so one can gloat at the near
meaningless perf difference - 2Mp draw is 15ms Lua / 10ms C on 1GHz Cortex A7.
* Uses bunch of new plumbing in base to configure screen rotations in hardware (koreader normally does this via blit buffer rotations, except for android).
* Some PB specific kludges that used to pollute core/framebuffer_linux are brought into PBs frontend driver.
move state change event to higher level function so it will be called after powerd.is_fl_on is updated.
makes _setIntensity redundant so get rid of it
obsoletes #6667
Only with CreDocuments (as no way currently to highlight links
in PDFs).
Tab or Shift-Tab to select next or previous links.
Press to follow (or show footnote in popup, and in there Press
to follow), back to go back.
A BackgroundRunner plugin instance will stop running
(rescheduling a check every 2 seconds) when there is no
(or no more) job to run.
Clients of this service now have to emit an event after
adding a job into PluginShare.backgroundJobs, so an
already loaded but stopped BackgroundRunner can notice
it and start running again.
Out of the box, it behaves exactly as native pocketbook apps should, ie aggressive
standby, but no freezing at operations in progress.
Config UI will be done via koplugin that will also do adaptive standby. This is
because the API is now device independent (albeit PB is the only implemented user).
* Add an option to *always* flash on chapter boundaries
* Optionally, in flash on chapter boundaries mode, also flash on the *second* page of a chapter.
(There's often a large river at the top of the page on a chapter's first page)
* In CRe, request a flashing update when there is significant image content on the page.
* Register all refresh rate related options in Dispatcher, making them available in Gestures & Profiles.
* deduplicate code on warmth/brightness swipes
if device has a small scale (e.g. warmth is going from 0..10)
* adjust warmth message
* use a smaller gesture sensitivity
Add Set Frontlight/Set Frontlight warmth events to dispatcher. This allows users to set day/night profiles with different fl/warmth values as requested in #6444
* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
use `device` `filemanager` `rolling` and `paging` sections to organize the
dispatcher menu and allow the user to know when the action will apply
add events from ReaderGesture
allow profiles in FM
* Allow locking the gyro to the current screen mode (i.e., orientation).
* Tweak the "sticky rota" option to work both ways
* More rotation constant usage instead of magic numbers
* landscape FM / Refactor rotation
refactor and simplify the orientation handling code. the user generally cares about the rotation (what direction the device is facing) and not about if koreader is displaying in portrait or landscape mode
* bump base
update luasocket, libjpeg-turbo, curl
add logging to evernote-sdk-lua
update framebuffer for proper rotation
joins calibre metadata search and calibre wireless connections into a single plugin
search metadata changes:
- search directly into calibre metadata files.
- search can be performed on more than one library (configurable from a menu)
- device scans now find all calibre libraries under a given root
- search options can be configured from a menu. (case sensitive, find by title, author and path)
- removed legacy global variables.
- *option* to search from the reader
- *option* to generate a cache of books for faster searches.
calibre wireless connection changes:
- keep track of books in a library (includes prunning books from calibre metadata if the file was deleted locally)
- remove files on device from calibre
- support password protected connections
- FM integration: if we're in the inbox dir it will be updated each time a book is added or deleted.
- disconnect when requested by calibre, available on newer calibre versions (+4.17)
- remove unused opcodes.
- better report of client name, version and device id
- free disk space checks for all calibre versions
- bump supported extensions to match what KOReader can handle. Users can override this with their own list of extensions (or from calibre, by configuring the wireless device).
* generic Device:info() function which returns the model
* add Device:canSuspend() and make it true in all devices that have suspend routines and the emulator
* also enable fake poweroff/reboot on the emulator
* add Device.home_dir
* add Device:hasExitOptions() and update menus & comments
Requires koreader/android-luajit-launcher#233
Requires koreader/koreader-base#1117
It is a workaround for #6263 but can be useful on some devices with erratic back key behaviour too (yep, Onyx)
* Ensure feature-parity in ScreenSaver handling on Kindle
We were missing the fancy extra white flash and landscape handling that
most every other eInk device gets ;).
Fix#5724
* Minor SO tweaks
The "swipe to unlock" ad screen was possibly managing to seep through on
slow devices.
* Less convoluted and more consistent logic
Thanks, @yparitcher ;).
Prevent the Tap>Hold setTimeout'ed function to trigger
on another later Tap.
Fix a Tap quickly following a Swipe (which triggers this
Tap>Hold timer) from becoming a Hold.
* Kindle FL shenanigans
Either fix#5986, or break a whole crapload of weird corner-cases.
Possibly the insane AutoFrontLight checks.
* Make fl step 0 usable on devices where 0 doesn't turn the light off.
By fudging an extra step on our own side.
* Also, add some debug logging around wmctrl to try to figure out what's
happening there...
* remarkable: remove unnecessary screen invalidate on resume
This is handled in uimanager if needsScreenRefreshAfterResume is enabled
(which is the default).
* remarkable: pass a path argument to reader.lua
Otherwise if lastfile is not set in the settings (e.g. install and then
exit without opening a file) koreader will just refuse to start.
* remarkable: pass koreader.sh args (if any) through to reader.lua
Touchscreen is mirrored in X & Y and has a different resolution from the eink panel.
Uses systemd for time/date/suspend/poweroff/reboot
Two systemd units for platform integration. button-listen is a very
simple launcher.
to-do: add support for wifi by implementing a wpa supplicant dbus client.
Authored-by: Thomas Spurden <tcrs@users.noreply.github.com>
* Allow running Shell/Python scripts from the FM
* Show an InfoMessage before/after running the script
Since we're blocking the UI ;).
* Allow running scripts from the favorites menu, too.
* Don't store stale screen/rotation modes in book's settings!
Gyro events *may* entirely bypass the local copy...
In any case, using a local copy was essentially asking for trouble...
Actually fix#5772
(because the issue was indeed that a Gyro swap from Portrait to Inverted
Portrait wasn't stored properly).
* Allow showing ScreenSavers in Inverted Portrait.
That works just fine, and won't lead to the confusing situation where a
lefty might pick up the device as a righty because the ScreenSaver
happens to be shown that way, only to have it rotate back to its lefty
orientation on wakeup...
bidi.lua:
- Revert "Alias everything to Bidi.nowrap() when in LTR UI,
as using LTR isolates seems uneeded when already LTR" (part
of a628714f) which was a wrong assumption: we need proper
wrappers for all things paths. Enhance some of these wrappers.
- Fix GetText RTL wrapping which was losing empty lines and
trailing \n.
- Wrap all paths, directories, filenames in the code with
these wrappers.
- Wrap all book metadata (title, authors...) with BD.auto(),
as it helps fixing some edge cases (like open/close quotation
marks which are not considered as bracket types by FriBiDi).
(Needed some minor logic changes in CoverBrowser.)
- Tweak hyphenation menu text
- Update forgotten SortWidget for UI mirroring
- KoptConfig: update "justification" index for RTL re-ordering,
following the recent addition of the page_gap_height option.
sysfs_light handles every case sanely already, no need to be cute ;).
This prevents always setting the warmth when setting the FL on NL
devices with a mixer, because, besides being useless, it's also slow
(lua does mmap'ed io, so every handle requires an fstat + mmap).
It was subtly affecting the fluidity of the toggle ramp, and much less
subtly wreaking havoc on #5373 ;).
KA1 owners might want to investigate keeping the fds around one way or
another, like we do for the fl ioctl, to alleviate the overhead of doing
that for not one but three or four fds...
I won't be doing that, since I lack the hardware to test it, and FL+NL
stuff is pain.
* Do the same on Cervantes
* Bump base to pickup related ioctl tweaks
When reasonably possible, the program should only crash in debug mode.
Adds a couple of extra unit tests to prevent regressions and adds docs.
Fixes <https://github.com/koreader/koreader/issues/5356>.
This commit standardizes the various todos around the code a bit in a manner recognized by LDoc.
Besides drawing more attention by being displayed in the developer docs, they're also extractable with LDoc on the command line:
```sh
ldoc --tags todo,fixme *.lua
```
However, whether that particular usage offers any advantage over other search tools is questionable at best.
* and some random beautification
* Try to make sure restoreWifiAsync eventually sends a NetworkConnected
event...
re: #5109
* Take a page from @shermp's book, and make sure wpa_supplicant managed to
connect to the AP before acquiring an IP.
Tear down WiFi modules in case of failure.
c.f., https://github.com/shermp/Kobo-UNCaGED/pull/21
* Don't let restore-wifi-async.sh enable WiFi behind our back when we're
killing it to start Nickel...
* Don't even call ping if there's no default gw
Close: #4997
This PR add support arrow key and mouse scroll wheel for next/previous page.
- Document in page mode:
PageDown, Arrow down, Arrow right - go to next page
PageUp, Arrow up, arrow left - go to prev page
Mouse scroll wheel down - go to next page
Mouse scroll wheel up - go to prev page
- Document in scroll mode:
PageDown, Arrow right - go to next page
PageUp, Arrow, arrow left - go to prev page
Arrow down - scroll document down
Arrow up - scroll document up
Mouse scroll wheel down - scroll document down
Mouse scroll wheel up - scroll document up
* Fix Kindle model detection in some corner-cases
We were (currently) unaffected because we don't support the K1.
Still, this should be slightly more robust.
* Make toggling Gyro events more robust
Actually ask to turn it on/off depending on the setting, instead of a
blind toggle
A quick succession of suspend/resume events could otherwise leave it
in an unexpected state (i.e., off when it should have been on).
For some mysterious reason, I have a duplicate default gateway on my
Forma, one with no metrics, and a proper one.
This ensures we pick the proper one.
I'm fairly sure this is temporary insanity on the part of my device,
but, still, it can't hurt.
route -n:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 208 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 208 0 0 eth0
ip r:
default via 192.168.0.1 dev eth0
default via 192.168.0.1 dev eth0 metric 208
192.168.0.0/24 dev eth0 src 192.168.0.49 metric 208
Robert-Jan de Dreu
roshavagarga
Robert-Jan de Dreu
Martín Fernández
poire-z
NiLuJe
yparitcher
Andrej Shadura
zwim
Mike Kozlowski
ElimGarak1
Galunid
Martín Fdez
hius07
Frans de Jonge
gbyl
Glen Sawyer
Rex Kerr
John Beard
ddvk
ezdiy
zwim
Teteros
Frank LENORMAND
Roman Artiukhin
dfhall
clarkspark
Lukáš Kucharczyk
Matias Nitsche
Thomas Spurden
tobiasarndt
Robert
vvasseur
jetomit
Андрей Тюрин