Add some menu items under Screen>Rotation to allow inverting
the default rotation of ImageViewer, and to auto-rotate for
best fit on launch, so landscape images are auto-rotated to
the preferred rotation.
Fix#11164 and involves a drive-by fix:
Kindle: Send Suspend/Resume event regardless of the screen saver state
If we get the events, it means stuff happened, we can't just only honor
it in the most common workflows ;).
This effectively reverts a tiny bit of #10426 (I was sort of expecting
this to be problematic at the time, and I most likely hadn't tested it).
They'll be disabled again when the widget in question is dismissed.
This exposes a couple of semi-obvious but edge-casey footguns to the user, but a hardened implementation is way uglier. See PR for details.
Just prevent page thumbnails ImageWidgets to be nightmode
inverted, unlike all other ones which are expected to be
double inverted to get their original colors shown.
The same thumbnail can be used and cached in both day and
night modes, unless "nightmode_images" is enabled and have
crengine itself invert images, making thumbnails different.
* Bump base
includes:
koreader/koreader-base#1691koreader/koreader-base#1692koreader/koreader-base#1689koreader/koreader-base#1690koreader/koreader-base#1693
* Integrate decoding of SSIDs within wpa_supplicant
The UTF-8 decoding of SSIDs is specific to wpa_supplicant. In this
patch, we move all of this decoding logic to the wpa_supplicant module.
We expose the raw bytes of the SSID to the NetworkMgr code, and make
sure to always fix bad UTF-8 before we display the SSID to the user.
Within the wpa_supplicant module, we replace the call to the
wpa_passphrase binary to get the PSK with a direct function call to
OpenSSL. This allows us to calculate the PSK over any arbitrary bytes,
including UTF-8. In the same vein, we use the hex-encoded SSID to
communicate with wpa_supplicant when setting up the network to support
arbitrary bytes in the SSID.
Unfortunately, we also remove the tests, as there is no way to unit test
local functions.
Checkboxes under TOC>Settings> allow enabling Custom TOC
and Custom hidden flows (similar to "Hide non-linear fragments"
available with some EPUBs).
Handled by a new ReaderHandmade module.
Adding and removing TOC chapters is done in PageBrowser
with long-press on a page thumbnail, and for chapters also
in the popup dialog after selecting some text in a page.
ReaderToc: add a symbol in title when the TOC is the
alternative TOC or the custom TOC.
When enabled in BookMap, both BookMap and PageBrowser get:
- alternating gray background on chapter spans
- hatched background instead of uni-gray on hidden flows.
Also, with both normal look and this alternative theme,
show some hatched overlay on thumbnails part of hidden flows.
ReaderToc: for each TOC item, have it carry its sequence/number
in that level (we do this in validateAndFixToc() where we are
already iterating all the items).
BookMap and PageBrowser instances can be stacked; when
toggling a bookmark in a lower PageBrowser and closing it,
make sure the bookmark is shown in the BookMap we get back to.
Also consider TOC and hidden flows as a thing that can be
edited and needs refreshing, so we're ready for next commits
about custom TOC and custom hidden flows.
Also update Reader footer when closing the last BookMap
or PageBrowser.
There was no real reason for having to wait.
Also avoid possible crash when a background generated
thumbnail would be displayed after other things happened.
Instead of small markers below the baseline, use
translucent vertical lines over most of the ribbon's
height to mark thumbnail rows, so we can more easily
relate chapter spans to thumbnail rows.
When not provided, the cursor stays at its initial position,
which might not be the best if replacing the whole content,
where we would prefer to have it at start or end.
* New menu option and filemanager filter to hide finished books #7158
The default behavior is to display the finished books (no change on
upgrade). For consistency with the two similar options, it represented
by a checkbox "Show hidden books" that is checked by default.
The implementation is straightforward, meaning that, when the option is
unchecked, each file will require a call to `filemanagerutil.getStatus`
that checks its status.
For clarity, the code uses the "finished books" expression because the
condition is relevant to the *book* metadata, while the other settings
are about *file* attributes.
Move as much of the state tracking as possible inside VirtualKeyboard itself.
InputDialog unfortunately needs an internal tracking of this state because it needs to know about it *before* the VK is shown, so we have to keep a bit of duplication in there, although we do try much harder to keep everything in sync (at least at function call edges), and to keep the damage contained to, essentially, the toggle button's handler.
(Followup to #10803 & #10850)
wpa_supplicant returns all non-ASCII SSIDs as raw bytes in the form
\x0a. We interpret these bytes as UTF-8, and make sure that all invalid
characters are replaced with a �.
Fix issue introduced by 976aaf5f: with full screen
text editor and hiding the keyboard, a tap in the
text area would show a new keyboard hiding the
buttons allowing to save/close the text editor,
getting us stuck there.
MultiInputDialog does a close -> show in the same callback,
so if we don't actually keep it in sync with the actual state, we lose
the keyboard and essentially softlock the UI, which is Very Bad(TM).
NOTE: InputDialog has its own keyboard_hidden flag, and it looks...
fairly nightmarish.
we use it as text anyway and test if it is the empty string also.
this fixes a crash in viewhtml when holding a selector with an empty clipboard, we try to contcate getClipboardText which is nil (on !SDL & !Android)
* Notification: Drop the fencing from #10083; it never actually helped, and had subtle side-effects we could do without.
* VirtualKeyBoard: Flash on close, otherwise, some of the fast refresh glitches may be burned into the working buffer until a flash. Making sure we flash ourselves prevent it from sticking around on the page ;).
* util: Move `writeToSysfs` to base (i.e., `ffi/util`), as we need it there (and it actually makes more sense there anyway ;p).
* Bump base for https://github.com/koreader/koreader-base/pull/1645, which is where the actual workaround (hopefully) lives.
Re #8414, #9806, #10558
- Add a toggle in Font settings> allowing showing font
ordered by most recently selected (long-press on
it allows clearing this history).
- Keep in G_reader_settings a list of known fonts, so
we can notice newly added user fonts, and put them
at the start of the most recently selected. Show
these new fonts with a symbol in the menu.
- TouchMenu: allows for a flag to trigger menu
refresh when going up.
Instead of opening the same font multiple times for each different
size (multiple face instances), share one face instance and create
multiple size instances.
Fix: #10539, and for context #6489, #6733, #6534
Reorganize and reword most of the settings to make it clear what actually ties into auto sync, and what doesn't. (Specifically, what happens when a pull attempts to sync forward or backward has nothing to do with auto sync, it applies in all cases; while the periodic sync *does* require auto sync).
The main point of contention, though, is that auto sync will now *always* attempt to setup network connectivity (i.e., on resume/suspend/close). Periodic sync will *not* though (the intent being that, if you use periodic sync, you're relying on the activity check to actually keep wifi on at all times)).
Since this may lead to a large amount of nagging about wifi toggles on devices w/ NetworkManager support, it is now *disabled* by default on those devices. (And given that it wouldn't have worked because of the lack of connectivity, that doesn't really make any practical difference ;p).
Additionally, given the fact that there's no way to make this behavior viable if the "before wifi" action is left at its default of "prompt", this feature now *requires* that to be set to "turn_on" (on devices where it can, of course); attempting to toggle it on will warn about that if necessary.
This change is retroactive (OTM).
Includes an assortment of fixes and cleanups, including migrating to the new LuaSettings API, which is why there's no longer a smattering of superfluous flushes.
Add a restricted but convenient mode showing BookMap like
in initial view, while still allowing chapter levels to be
tweaked. This allows getting back to this view with another
gesture to see the overall progress in the book, while
still having the normal BookMap in flat mode acting as
an alternative ToC.
Available as an action to associate to a gesture, and
with long-press on the "Book map" menu item.
Allows hairy-boxes amateurs to get small markers (under
the baseline) every 10 pages (with -/+ to get small or
medium markers, with optionally smaller ones every 5 pages).
Align page numbers (the vertical ones, on the left of
a BookMapRow) on the baseline of the BookMapRow, where
page slots rise from.
Also tweak the page number spike below the baseline used
in PageBrowser.
Notification is a toast, so it doesn't stop event popagation.
If we don't disable thoses handlers inside Notification, we get spurious
duplicate handlers being fired ;).
Fix#10461
Happens in case the InputText field is emptied by the user.
The backend code makes rather strong assumptions that it'll *always* get a number of of it ;).
Fix#10352
Add a left button to the title bar to show the list
of results as a popup.
Dictionary: tap or long-press on that button give
different view of the results.
Wikipedia: request 30 results instead of 20, so we
can show 15, 10 or 6 of them per page of that popup.
With tall ButtonDialog with many rows, allows for a more
natural and readable scrolling without any truncated row
(like in Excel, we previously behave as web browsers).
ButtonTable:
- make the span and separator layout more explicite
- add some small horizontal padding when button text
is centered
When the containee is row-based, this can ensure that when
scrolling with swipes, we get the a full row at top, and
that any truncated row at top or bottom is fully visible
after a swipe.
The final height of a button could be different whether
a smaller font size or multiline end up being used.
Also fix 2-lines logical error making it less favored.
Also forward any lang property to the underlying text widgets.
* Rewrite the loop mechanism to use scheduled tasks instead of a single blocking-ish subprocess.
* Change the actual logic to be more pleasing to the eye, especially on newer devices, as those *may* natively ramp on set; and fix a bad interaction with that behavior that could lead to no ramp at all on ramp down.
* Simplify Generic's Suspend handling to deal with the refresh ordering in a saner manner. The screensaver might be visible a tad longer than before this change before the frontlight actually ramps off.
Add a top left menu item -/+ to show none, only on the
first thumbnail of a row, or on all thumbnails.
Also make the page slot separator longer in the bottom
ribbon before pages that start a thumbnails row.
Also show a little spike in the bottom ribbon below page
slots that get their page number displayed, to ease
figuring out the connection.
Change algorithm to comparing all kv pairs.
Also ignore any pairs where the value is "" when computing
the alignment, since they usually are intended more as
a title and should not interfere.
Handle scroll by row or page a bit differently, so we dont
constrain and readjust the focus page when reaching book
start or end: when later scrolling in the other direction,
we'll find exactly the view as it was (this means that
we allow a single thumbnail in the view, but it's less
confusing this way).
When using the new option "Daily timeline starts at",
make the separator line between 23:00 and 00:00 thicker.
Also tweak time picker to pick minutes by units of 10,
and remove max hour (06:00) limitation.
Split original very long help text (which was very
slow to display) into 2 parts: About... and Available
gestures.
Also add -/+ buttons to change things (which can already
and more practically be done with swipes along the edges)
to give a bit of meat to these menus.
When passing as 'anchor' a Geom object (ie. a widget dimen
or a ges.pos), or a function returning such an object,
a MovableContainer will be initially positionned near this
point/widget, instead of being centered on the screen.
Allow that for ButtonDialog and ButtonDialogTitle, so we
can make them behave as context menus (ie. for a titlebar
top left/right icons).
If buttons and their text would fit in a smaller width,
reduce the whole ButtonTable width.
May be used for properly sized context menus with
ButtonDialog, with the width required depending on
the translations for a language.
Make these 2 widget behave similarly, and don't rely on
ButtonTable default width for their own default width.
ButtonDialogTitle: also properly size its title.
Properly compute Button and separator widths,
instead of using magic numbers (which lost their
magic over the years :)
Ensure buttons and progress widgets are properly
aligned on the sides.
Move the optional Warmth "Configure" button in the
middle of Warmth Min and Max.
Fix keyboard navigation layout, which was not working
on devices with Warmth.
All our widgets are considering their provided 'width'
as the outer width, except Button which considered it
as some 'inner width', to which padding/border/margin
were added. Let's have them all consistent.
Some other widgets using Button had tweaks to account
for that odd behaviour: fix and simplify them.
Also fix Button layout when text is left aligned.
For example, to determine whether the Japanese or Chinese form should be shown.
* Dictionaries.lua - use iso3 codes everywhere
readerdictionary.lua - convert iso to bcp tag, to construct ifo_lang
isolanguage.lua - map from iso3 to full language name, map from iso3 to bcp language tag
* Make the full language names translatable
* Store ifo information from dictionaries.lua in downloaded dictionaries
As done in DictQuickLookup (more event handlers are
needed to cohabitate well with MovableContainer).
By default, selected word or text is copied to clipboard.
Also provide indexes to any long-press callback, as we'll
need them for View HTML.
- Fix sorting folders when collate is "type", "size", "percentage":
folders are sorted by name now.
- Fix getting next file in folder when collate is "mixed files and
folders": returned nil when next item was a folder.
hius07
poire-z
Wim de With
NiLuJe
François Gannaz
yparitcher
zwim
Glen Sawyer
Benoit Pierre
weijiuqiao
nairyo