* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
Witnessed with "L/R Margins": tapping on a button
sets the value to the preset table, by reference.
Tapping the -/+ fine tuning buttons was updating
these tables in-place, in effect modifying the presets.
Avoid conflicts having "In-page EPUB footnotes (smaller)"
affects FB2 documents that use "<a type=note>12</a>" which
would then get smaller if both tweaks are enabled (which
they are, by default).
Also switch "-cr-hint: strut-confined" from being set on "*"
to being set only on "body", now that it is inherited.
Footnote popups: add styles for some non-HTML FB2 tags,
so MuPDF can render them as expected.
use `device` `filemanager` `rolling` and `paging` sections to organize the
dispatcher menu and allow the user to know when the action will apply
add events from ReaderGesture
allow profiles in FM
* Mangle stupid defaults test so that it compares tables, and not a non-deterministic string representation of one.
It's still extremely dumb and annoying to update. (i.e., feel free to kill it with fire in a subsequent PR, I think everybody would cheer).
* Rewrite DepGraph to be deterministic
i.e., fully array based, no more hashes, which means no more pairs randomly re-ordering stuff.
Insertion order is now preserved.
Pretty sure a couple of bugs have been fixed and/or added along the way
;p.
* Resync frontend/apps/filemanager/lib/md.lua w/ upstream
And use orderedPairs in the attribute parsing code, just to make that stupid test happy.
* Allow locking the gyro to the current screen mode (i.e., orientation).
* Tweak the "sticky rota" option to work both ways
* More rotation constant usage instead of magic numbers
* landscape FM / Refactor rotation
refactor and simplify the orientation handling code. the user generally cares about the rotation (what direction the device is facing) and not about if koreader is displaying in portrait or landscape mode
* bump base
update luasocket, libjpeg-turbo, curl
add logging to evernote-sdk-lua
update framebuffer for proper rotation
add a Dispatcher module that allows for dispatching multiple events at once.
This will allow for profiles & for gestures that do multiple things.
it has 2 methods:
Execute which is given a kv table of settings to change and fires an event for each of them.
addSubMenu adds a menu item to a menu to allow for modifying which events are called
it also has settingsList which is a master table of all allowed setting and their corresponding info
(it is mostly from ReaderGesture and needs a lot of work)
to allow for a new setting all one has to do is add a entry to settingsList with a corresponding event and it will work out of the box.
the profile plugin is right now still a stub, just to test Dispatcher. the plan is to finish it and eventually refactor ReaderGesture to rely on this.
This also needs effort to move many functions out of reader gesture into events where they belong.
Err, kind of nitpick PR. Is just add some "permanent" menus other than plugins to the new "more_tools" submenu. So it will never be empty.
Follow-up: #6279
Supersedes: #5512#6092Fixes: #5461
joins calibre metadata search and calibre wireless connections into a single plugin
search metadata changes:
- search directly into calibre metadata files.
- search can be performed on more than one library (configurable from a menu)
- device scans now find all calibre libraries under a given root
- search options can be configured from a menu. (case sensitive, find by title, author and path)
- removed legacy global variables.
- *option* to search from the reader
- *option* to generate a cache of books for faster searches.
calibre wireless connection changes:
- keep track of books in a library (includes prunning books from calibre metadata if the file was deleted locally)
- remove files on device from calibre
- support password protected connections
- FM integration: if we're in the inbox dir it will be updated each time a book is added or deleted.
- disconnect when requested by calibre, available on newer calibre versions (+4.17)
- remove unused opcodes.
- better report of client name, version and device id
- free disk space checks for all calibre versions
- bump supported extensions to match what KOReader can handle. Users can override this with their own list of extensions (or from calibre, by configuring the wireless device).
* generic Device:info() function which returns the model
* add Device:canSuspend() and make it true in all devices that have suspend routines and the emulator
* also enable fake poweroff/reboot on the emulator
* add Device.home_dir
* add Device:hasExitOptions() and update menus & comments
More tools is a submenu in the tools menu, not in the plugins menu. That everything in there happens to be plugins is merely a technical detail and not considered part of the unifying menu vision. Plugin management should be last as it is because it's only used once in a blue moon, if it should be in the tools menu at all. The same applies to settings more broadly. Putting plugin management in the tools menu is traditional, however.
Plugins should not and are not supposed to be most at home in the tools menu. Those plugins that happen to be in the tools menu are by and large there because that's where they fit best. Those that don't are new and I didn't have the heart or energy to make much of a fuzz about it provided they had a reasonable claim to the tools menu. That includes plugins like tweak document settings which should be more at home in settings → document.
Also see <https://github.com/koreader/koreader/issues/6105#issuecomment-621653800>.
Requires koreader/android-luajit-launcher#233
Requires koreader/koreader-base#1117
It is a workaround for #6263 but can be useful on some devices with erratic back key behaviour too (yep, Onyx)
* Fix HW dithered partial refreshes sometimes behaving as if the refreshed
content had moved a few pixels to the side...
Probably a kernel issue with the alignment fixup in the EPDC?
* Get rid of the legacy coordinates fixup
It shouldn't be necessary anymore.
And I'd rather fix the root cause, anyway.
* Bump base
(https://github.com/koreader/koreader-base/pull/1116)
* Missed a few DIVs in #6224
dofile() wasn't enough to copy en_keyboard, as the references
to key popups would still be shared, and hacks to them (as
done by the FR keyboard) would be active on the EN keyboard.
Also, for the FR Keyboard:
- bring M key popup too when moving it to 2nd row.
- keep original ',' and '.' as on EN keyboard.
- add ';' instead of ',' as the added key, and let it have
some key popup too, with keys helpful when CSS editing.
Allows editing a CSS snippet to be applied to this
book only, without the need to create and edit
a User style tweak.
Allows copying any other tweak CSS by just taping
on it (and pasting into this with Hold).
Limit User style tweaks nb of items per menu page
to 6 (like we try to do for other tweaks menus).
Includes:
- GIF decoding: avoid crash on some images
- Top progress bar: avoid re-computing when not needed
- Top progress bar: allow external filling of marks
- CSS/Text: properly inherit and handle text-align-last
- getRenderedWidths(): fix handling of text-indent
- Reorder some flags to make the sets clearer
- CSS: support more white-space named values
- Text: fix standalone BR not making an empty line (rework)
- CSS: support for pseudo elements ::before & ::after
- CSS: content: open-quote support via TextLangMan
- CSS/Text selection: adds a few "-cr-hint:" tweaks
cre.cpp: adds setHeaderProgressMarks()
Added 2 style tweaks to disable pseudo elements
::before/after and common ligatures.
This is a quick exploration into how the new Device:hasFewKeys() method could work to make things more usable on very limited devices.
In the reader, the right is repurposed to open the menu. Left in turn closes it.
The same principle is applied to ButtonDialog. This means you can select anything in principle, but once you go right you can't go back.
References <https://github.com/koreader/koreader/issues/4029>.
- Fix wrong values for books opened (or first opened)
from April 14th to May 20th: highlights and notes
possibly being NULL was preventing nb of pages and
last_open from being fetched.
- Re-order current book and all books stat items to some
hopefully more sensible order.
- Some rewording for clarity.
KeyValuePage:
- Have value_overflow_align="right" only align right
when value overflows 1/2 screen width, but not
when only key overflows that.
- Show truncated text also on Tap when there is no
callback.
Using DoubleSpinWidget.
Also keep SpinWidgets open on Apply.
Added little trick: if widget has been moved, close
bottom config menu on next Apply to show more of
the book.
- Use same names for options;
- Have them both movable
- Add option to keep widget shown on Apply (and use that
when appropriate: when the value may have an immediate
visual effect, so one can tweak it without having to
go thru menus to re-open it again).
Make them external links so they don't trigger a "link is
invalid" popup and we can use swipe left/right to navigate
pages (and jump to latest bookmark/go back for comparing).
Mostly for the PDF bottom menu.
- Reorganize by topic, trying to limit the number
of widgets per panel to 4.
- Re-order some toggles from low to high ('off' then 'on').
- Show font size as number instead of a list of "Aa".
- PDF: add more font size values, and increase usable
contrast values.
- Add help_text to most PDF toggle titles.
- CRE line spacing: increase fine tuning min and max.
Also avoid zoom advice messages on book load.
Bump crengine:
- Text: fix occasional BiDi bad word splitting
- Font: fix HB fallback measurement/drawing mismatches
- Font: do not add letter spacing on diacritics
- Text: tunable use of letter spacing for justification
- Text: dont adjust space after initial quotation mark/dash (rework)
- Text: fix possible bad widths after collapsed spaces
xtext.cpp: pick crengine fix with HB fallback
measurement/drawing mismatches
Adds "Word Expansion" to bottom Font size menu, and moved
"Word Spacing" there too, to balance the panels' heights
to 4 items.
Also add "Dictionary" and "Fulltext search" to available
and cycleable highlight actions.
Generalize long-press (3s) at end of selection to show
the highlight dialog popup.
Replace Hyphenation menu with Typography menu.
This works mostly like before:
- typography/hyphenation is chosen according to the book
metadata language,
- one can set a default or a fallback language,
- hyphenation is now just a subset of typography, and
can be disabled while still setting a language and
enabling the other features,
- the typography language enables newly added features
to crengine: per-language line breaking rules and
per-language Harfbuzz glyph selection.
bump crengine: support for EPUB3 nav toc and page maps
Includes:
- Fix lvRect:isRectInside(rc) with 0-width or 0-height rect
- TOC: parse EPUB3 nav toc, fallback to spine when no toc
- Parse and cache various hardcopy page list maps
- epub.css: hide EPUB3 <span epub:type="pagebreak"> content
cre.cpp: add a few PageMap helper functions.
Adds ReaderPageMap which will add a new menu (under TOC and
Bookmarks) that will allow:
- to list source page numbers (like a TOC)
- to show visible page labels in the right margin
- to use these source page numbers in the footer, the TOC,
the GoTo and SkimTo widgets, and to use the source page
number in the standard bookmark and highlight initial text.
- Add some style tweaks to allow displaying FB2 end notes
in-page too - and to allow showing them without a smaller
font size.
- Show footnote number in bold in popup footnotes.
Set these 2 tweaks as default global tweaks for new users
(and existing users that have not set any global defaults).
One can disable them by long-press on each of them.
Only per-specs EPUB and FB2 footnotes (other in-page footnotes
tweaks may trigger on non-footnote content on some books, so
let enabling them be a user decision).
- FB2 footnotes are no more rendered in-page by default
- In-page rendering can be enable by the added Style tweak
- FB2 footnotes can also show in footnote popup (with
some added not-so-nice CSS so MuPDF can render them
as crengine)
Just like what's been done previously for InfoMessage.
Also tweak 'other_buttons' option (not yet used anywhere)
to allow multiple rows of such other buttons.
Adds a screensaver mode which is just a line of text at the top of the screen. Purpose is to be minimally obstructive while still displaying something to indicate the device is asleep.
Don't display a tofu glyph when meeting a tab (none of
our fonts have a glyph for it).
New parameter: TextBoxWidget.tabstop_nb_space_width,
that defaults to 8, to ensure tabstops in the usual
left aligmnent (or right when para is RTL).
* Make sure the Color menu is accessible on GrayScale device, in the event
one would have inherited a color-enabled settings from another
device...
* Warn on startup if color rendering is enabled on a grayscale device.
A non-exhaustive lists of things such a setup would break:
* same-to-same blitbuffers for pretty much every rendering engine
* same-to-same blitting codepaths and fast-paths
* software dithering in CRe
Also adds options to remove statistics for books
with low reading duration (to clean up stats for
books just quickly browsed and not yet read).
Also adds TextWidget:getFontSizeToFitHeight()
even if we ended up not using it.
Try to limit the nb of items per menu page to 5 or 6 by
splitting related ones into sub-menus, so we get more
room below to see how they affect the content.
Adds "No indentation on first/following paragraphs" and
"Paragraphs margins and paddings", and Links underlining.
The default left margin on blockquote and dd is `40px`, but unfortunately that doesn't scale. rem is calculated using a hardcoded16px, so em or % is the best compromise in this case.
PS If we assume 1em = 16px then 40px is actually 2.5em, not 1em. This reduction in indentation is mainly intended for the benefit of smaller E Ink devices.
Closes <https://github.com/koreader/koreader/issues/5859>.
* Unbreak OTA on crappy shells
Very, very old ash versions abort on set -o failures (as mandated by
POSIX, granted). This makes it impossible to reliably catch failures in
a single step.
So do it from the Lua side instead.
Should fix#5844
* Launch the zsync wrapper through bash on Cervantes
Previous cleanup resurrected multiple class names, so
we know now the original alignment of a float.
Use them in 'web' mode, as it allows floats to be nearer
the section they are refering to, and it may limit
floats truncation in page splitting.
But keep floats aligned on a single side in 'book' mode,
as it might allow easier reading.
* Also remove the temporary files when doing a full retry
* Bump base
Pickup the required zsync2/FBInk updates
(https://github.com/koreader/koreader-base/pull/1038)
* Actually does what it says on the tin for Abort
i.e., cleanup temporary files
Touchscreen is mirrored in X & Y and has a different resolution from the eink panel.
Uses systemd for time/date/suspend/poweroff/reboot
Two systemd units for platform integration. button-listen is a very
simple launcher.
to-do: add support for wifi by implementing a wpa supplicant dbus client.
Authored-by: Thomas Spurden <tcrs@users.noreply.github.com>
OPDS catalogs may have search query capabilities. It is very usefull to find a
book in huge catalog, even when they are organized as directories. This commit
provides the possibility to add a %s mark in an OPS catalog URL, that would
trigger a search box when browsing the OPDS in koreader.
* File search: Don't traverse hidden folders if we're not showing them
Re https://www.mobileread.com/forums/showpost.php?p=3949194&postcount=21
* Ignore macOS resource forks, too.
* Apply the same logic to the BookInfo directory walker
* And never ever show resource forks in the FM, either.
It's extremely confusing, as it has nothing to do with calibre catalogs,
which are actual things the user can generate manually.
What it's using instead is actually a metadata cache in a flatfile db
that's always present, as long as "Send To Device" was used to upload
the content to the device.
* Allow running Shell/Python scripts from the FM
* Show an InfoMessage before/after running the script
Since we're blocking the UI ;).
* Allow running scripts from the favorites menu, too.
MuPDF does not handle "text-align: justify" correctly on
RTL text: the last line is left-aligned, but it should be
right-aligned.
Not using justify makes it correctly right align the whole
text.
Gives the book language to Text*Widget (and XText) when
drawing title, authors and other metadata text.
Might be needed to properly display a Japanese book title
when the UI language is Chinese.
bidi.lua:
- Revert "Alias everything to Bidi.nowrap() when in LTR UI,
as using LTR isolates seems uneeded when already LTR" (part
of a628714f) which was a wrong assumption: we need proper
wrappers for all things paths. Enhance some of these wrappers.
- Fix GetText RTL wrapping which was losing empty lines and
trailing \n.
- Wrap all paths, directories, filenames in the code with
these wrappers.
- Wrap all book metadata (title, authors...) with BD.auto(),
as it helps fixing some edge cases (like open/close quotation
marks which are not considered as bracket types by FriBiDi).
(Needed some minor logic changes in CoverBrowser.)
- Tweak hyphenation menu text
- Update forgotten SortWidget for UI mirroring
- KoptConfig: update "justification" index for RTL re-ordering,
following the recent addition of the page_gap_height option.
Ellipsis was sometimes not displayed when text is right aligned,
because width was not updated with ellipsis size.
bump base/xtext: fix truncation ellipsis position in bidi text
so it stays nearer to previous logical order char, instead of
sometimes being thrown away to start or end of line.
Replaces DAUTO_SAVE_PAGING_COUNT in defaults.lua with
a new option available in menu, that allows setting
an interval in minutes instead of a page count.
The Japanese keyboard still needs to be cleaned out a bit more at some point, but the important thing is that this commit fixes#5632 by restoring the kanji layer with the voiced-unvoiced conversion symbol.
- Alias everything to Bidi.nowrap() when in LTR UI, as using
LTR isolates seems uneeded when already LTR.
- Better wrapping of RTL filename by using auto direction and
LTR-isolating only the suffix so it's always on a side.
- menu.lua: handle bidi_wrap_func outside getMenuText(), which
may be used in other contexts.
- Add BD.filepath() and BD.dirpath()
- bump crengine: (Upstream) DocX: fix paragraphs with single hyperlink
- bump fribidi to 1.0.8 (for nested isolates fix)
- xtext.makeLine(): return no_allowed_break_met=true when that
happens, so we know the line breaks inside a word.
TextBoxWidget: add forgotten property (when use_xtext=true) when no
line break opportunity was found: has_split_inside_word=true.
(Only used by CoverBrowser Mosaic mode to make nicer text covers
by reducing font size when that happens.)
A few fixes and enhancement related to bold text:
- When using bold=true with a regular font, use its bold
variant if one exists (can be prevented by manually
adding a setting: "use_bold_font_for_bold" = false).
- When using a bold font without bold=true, promote bold
to true, so fallback fonts are drawn bold too.
- Whether using a bold font, or using bold=true, ensure
fallback fonts are drawn bold, with their available bold
variant if one exists, or with synthetized bold.
- When using a bold variant of a fallback font, keep using
the regular variant as another fallback (as bold fonts
may contain less glyphs than their regular counterpart).
- Allow providing bold=Font.FORCE_SYNTHETIZED_BOLD to
get synth bold even when a bold font exists (might be
interesting to get text in bold the same width as the
same text non-bold).
- Use the font realname in the key when caching glyphs,
instead of our aliases (cfont, infont...) to avoid
duplication and wasting memory.
Small tweaks all around to handle UI mirroring:
- swap existing symbols like arrows, or use alternative ones
- rotate some images, like chevrons and dogear icons
- flip some left and right swipe handling
- flip some geometry arithmetic like tap on left or right
side of page or dict window
- use new ProgressWidget:getPercentageFromPosition() instead
of geometry arithmetic
- BD.wrap() some concatenated string bits, like in reader
and menu footers
- flip inverse_reading_order when UI is mirrored
More specific tweaks:
- ReaderGesture: reset some specific gestures when UI direction
has changed (tap on top/bottom left/right corners, for
bookmarks and FileManager "Plus menu").
- ReaderRolling: show markers on the correct side of page,
in single or dual page mode.
- KoptOptions: swap left and right icons in Alignment toggle
- CheckMark: proper rendering in all 4 mirroring/rtl combinations.
- VirtualKeyboard: forbid any mirroring
- Move util.getMenuText into Menu.lua
Allow TextBoxWidget new text direction/lang parameters to be
set on upper widgets, and propagate them all the way to it
(ScrollTextWidget, InputText, InputDialog, TextViewer).
Use specific non-default ones in some specific cases:
- Force LTR text direction when showing HTML and CSS, and
configuration files (in some plugins).
- Use Wikipedia server language and text direction when
showing an article.
- Use auto with Dictionary results, as we don't know the
dictionary language, and they may contain mixed content.
- Force LTR when showing some paths (still needs more of them)
TextEditor plugin: add 2 new options "Auto paragraph direction"
and "Force paragraph direction LTR".
Footnotes popup: grab HTML direction, and forward it
to MuPDF for proper display.
Set default language (for Harfbuzz to pick up localized glyphs
in a font), default text direction, and UI element mirroring
depending on the UI language.
Use some HorizontalSpan for padding between key and value,
instead of prepending a space to the value text (which
won't work as expected if value text is RTL, as it would
be put on the right side of screen).
Changes in this commit:
- Fix arrays to large (10 elements instead of 8) copied from the old keyboard system. Issue introduced in #5610
- Add ё popup.
- Change shift key as per #5659 (for both ro and ru keyboards)
- Translate Russian space and symbol keys.
- Rename Sym key to 123
This adds a new separate Romanian keyboard layout, with popup support.
- Functional buttons are translated.
- Pages 5&6 contain 3 groups of characters (I tried my best to group them logically):
- On the left: traditional Romanian cyrillic pre-1850s
- On the middle latinised forms from 1850s onwards
- On the right modern diacritics from 1900s to today
- Pages 7&8 add only large double quotes and section/paragraph mark.
- Popups are only avalable for most common diacritics. Swipe up for circumflex, swipe down for breve.
I can really call this the most complete though-the-ages Romanian keyboard. :)
Includes:
- New option to tune word spacing: space width scale percent
- Text: look for hyphenation in more words if needed
- CSS: fix "hyphens:none" should override inherited "hyphens:auto"
- getHtml(): grab dir= and lang= attributes from upper nodes
Replace our Word Gap/Space condensing toggle/setting with
a new Word Spacing toggle/setting, made of 2 values:
- 1st number scales the normal width of spaces in all font
(100% uses the font space width untouched)
- 2nd number applies after the 1st has been applied, and
tells how much these spaces can additionally be condensed
to make more text fit on a line.
The japanese keyboard being taller than the others, when
switching to/from it from/to another layout:
- re-init InputDialog for proper sizing and positionning
- refresh the whole screen, to remove any trace of
a previous taller keyboard
Also add calls to :free() here and there to free keyboard
keys' TextWidgets' XText C objects without waiting for GC.
The korean keyboard wraps InputText and overrides some
of its methods to process input in some specific way.
When switching to another keyboard layout, the original
methods need to be restored.
* Switch the last few remaining icons to true glyphs
(Del/Backspace & Enter).
Also, allow a glyph to be rendered in (fake) bold, and use it for Enter.
* Update fonts
Pickup the tweaked nerdfonts for the backspace symbol
Follow-up to #5583.
* Add separate Cyrillic/Russian keyboard
* And remove that from English
* Update French keyboard (is easy)
* Remove yahzhert, that was just a double of QWERTY
* Update Spanish keyboard
* Reduce Japanese to 4 layers and add globe
* Reduce Korean to 4 layers
* Reduce Greek to 8 layers
Option to synchronize files in local koreader folder with folder on Dropbox. All files that aren't on the local disk will be downloaded. Files with different sizes will also be downloaded and overwritten.
The download process can be paused or stopped at any time (similar to downloading images in Wikipedia).
Synchronize and settings are available after long press in dropbox account in Cloud storage.
Limitations: Only one folder (without subfolders) can be synchronize with one folder on local storage.
- height_adjust: if true, reduce height to a multiple of
line_height (for nicer centering)
- height_overflow_show_ellipsis: if height overflow, append
ellipsis to last shown line
(Implemented in both use_xtext and legacy code path.)
Use them in Menu.lua to clean up/shorten the code used for multiline
menu items by delegating the work to TextBoxWidget, or using
TextWidget when we end up needing only a single line.
Alternative code to size, split lines and draw text with
the help of the xtext Lua C module.
Enabled by default (can be disabled via an added menu
item in "Developer options").
New properties can be specified by calling widgets, only
used when xtext is used:
- lang: use specified language instead of the UI language
- para_direction_rtl: true/false to override the default
direction for the UI language
- auto_para_direction: detect direction of each paragraph
in text
- alignment_strict: prevent the inversion of the specified
alignment= that is done when a paragraph direction is
set or detected as RTL.
Also: fix possible memory leak (present even when not using xtext)
by calling :free() in onCloseWidget() like it's done in ImageWidget.
Alternative code to size and draw text with the help
of the xtext Lua C module.
Enabled by default (can be disabled via an added menu
item in "Developer options").
New properties can be specified by calling widgets, only
used when xtext is used:
- lang: use specified language instead of the UI language
- para_direction_rtl: true/false to override the default
direction for the UI language
- auto_para_direction: detect direction of each paragraph
in text
bump base for libkoreader-xtext.so:
- ffi/pic.lua: fix memory leak with some unsupported PNG files
- FreeType ffi: add methods for use with Harfbuzz shaping
- thirdparty: adds libunibreak
- Adds libkoreader-xtext.so: enhanced text shaping
Add a getFallbackFont(N) to each Lua font object to instantiate
(if not yet done) and return the Nth fallback font for the font.
Fallback fonts list: add NotoSansArabicUI-Regular.ttf
Add RenderText:getGlyphByIndex() to get a glyph bitmap by glyph
index, which is what we'll get from Harfbuzz shaping.
(RenderText:getGlyph() works with unicode charcode).
Tapping to turn page while some image is loading was
interrupting the image loading, but not turning the page,
since a82d7832 where using trap_widget=false is to be
used to not resend the event (while =nil does resend it).
It might be slower, but is needed to properly display
books in arabic, indic...
Also bump crengine: use FreeType "light" hinting algorithm,
which hints on the y-axis only (and so avoid messing with
advances and kerning on the x-axis).
* Unify battery meters look'n feel
Switch to proper (vertical) battery icons (one per 10% steps).
Fix#5535
* Bump fonts (https://github.com/koreader/koreader-fonts/pull/7)
Because we need the new symbols from nerdfonts ;).
(used by bookmarks list and classic file browser)
When text is too long or line too tall:
first: we try to decrease the number of lines (eg from 3 to 2 and from 2 to 1 line)
second: when 1 line is too tall, we try to decrease font size (-1)
And at the end we try to add or remove chars to better fit text.
Lots of code was doing some renderText calls to get the size
of some text string, and truncate it to some width if needed,
with or without an added ellipsis, before instantiating
a TextWidget with that tweaked text string.
This PR fixes/adds some properties and methods to TextWidget
so all that can be done by it. It makes the calling code
simpler, as they don't need to use RenderText directly.
(Additionally, when we go at using Harfbuzz for text rendering,
we'll just have to update or replace textwidget.lua without
the need to update any higher level code.)
Also:
- RenderText: removed the space added by truncateTextByWidth
after the ellipsis, as it doesn't feel needed, and break
right alignment of the ellipsis with other texts.
- KeyValuePage: fix some subtle size and alignment issues.
- NumberPickerWidget: fix font size (provided font size was
not used)
* Changed File Browser text
KOReader looks nicer than KOReader File Browser,
* Remove the "page x of x" if only one page
Removes it from the bottom of the file browser
* Remove the "page x of x" if only one page
Removes it from the top menu, if there is only one page, why show page 1 of 1
* Renamed ~ to Home
Since the file browser can be considered "Home"
* Added 12 hour time option
Also tweaked the charging icon, ⚡ looks nicer than +, tweaked seperator between time and battery, - instead of @
* Don't break `doc_pages` updates when it's completely disabled. (c.f., the commit's comment, doing it on every page turn seems a bit overkill, but I get that it's probably done that way because it was easier ;)).
* Detect the empty footerTextGenerator properly in `_updateFooterText` (it's `""`, not `nil`).
* Abort `_updateFooterText` early when the footer is invisible (and has been for a while/ever, i.e., when not requesting a repaint, like a mode switch would).
* Never send `SetBottomPageMargin` events twice.
* Minor tweaks to touchmenu & configdialog to avoid useless repaints (don't redraw the reader/fm unless we absolutely need to).
* Make sure we show the progress bar alone instead of nothing when disabling the last enabled mode in the menu.
Tap any part of screen to toggle bottom buttons visibility.
Swipe south to quickly close it (as long as image is scaled
to fit, and there's no need for panning).
bump crengine: enhanced RTL block rendering.
Includes:
- Re-enable: Use the same FT load flags in HB as in FT
- Avoid redundant calls to getStyle()
- CSS: parse and store "direction:"
- Enhanced block rendering: handle RTL direction
- Enhanced block rendering: handle RTL tables
- Pagesplitting: account for lines' text direction
- CSS: add support for more pseudo-classes
- epub.css: a few updates for RTL documents
- Fix LVDocView::getBookmark() which could be slow or wrong
Add a few style tweaks useful to RTL readers.
Wikipedia Save as EPUB: build proper RTL documents from
persian, arabic, hebrew (and others) Wikipedia articles.
And a couple bugfix this unearthed:
* Always set the default as the *current* value, no matter what (by chance, this was not an issue for margins).
* Don't crash on the hold gesture in the -/+ buttons for the horizontal margins (regression since #5303).
Thanks to <https://github.com/koreader/koreader/pull/5237> we can now extract the knowledge currently embedded in Transifex and put it directly in our source. This positively affects <https://github.com/koreader/koreader/issues/3754>.
Translation instructions and knowledge that comes out of localization-related questions should be preserved in the source, because Transifex is too ephemeral. For example, the links from <https://github.com/koreader/koreader/pull/2290> are no longer accessible. Even when they are, it's quite useful to have this information around while dealing with the code as well, and I also hope it'll be informative to contributors who seldom visit Transifex.
This commit also makes a few minor changes to obviate the need for comments where possible.
This commit standardizes the various todos around the code a bit in a manner recognized by LDoc.
Besides drawing more attention by being displayed in the developer docs, they're also extractable with LDoc on the command line:
```sh
ldoc --tags todo,fixme *.lua
```
However, whether that particular usage offers any advantage over other search tools is questionable at best.
* and some random beautification
This introduces context to our strings to differentiate them when necessary.
The syntax chosen is `C_()`, following [glib](https://developer.gnome.org/glib/2.28/glib-I18N.html#C-:CAPS).
```lua
local _ = require("gettext")
local C_ = _.pgettext
C_("Menu|StyleTweaks|", "Pages")
```
Closes#5232.
The current name causes people to think of scrolling, which is slightly awkward on E Ink. For example, see <https://github.com/koreader/koreader/issues/5166#issuecomment-517771475>.
> But this on LCD, not E-ink where the lag is unbearable, especially if you want to correct any scrolling over/undershoot.
Scroll mode is a misnomer. It should be renamed continuous. I use "scroll mode" as the default, but I seldom or never scroll. Conversely, you can still scroll in paged mode if a page is longer than the screen. As far as I'm concerned if you're scrolling (panning) you may be doing it wrong, but to anyone reading: you do you. ;-)
* Try to make sure restoreWifiAsync eventually sends a NetworkConnected
event...
re: #5109
* Take a page from @shermp's book, and make sure wpa_supplicant managed to
connect to the AP before acquiring an IP.
Tear down WiFi modules in case of failure.
c.f., https://github.com/shermp/Kobo-UNCaGED/pull/21
* Don't let restore-wifi-async.sh enable WiFi behind our back when we're
killing it to start Nickel...
* Don't even call ping if there's no default gw
Provides a bit more granularity than the generic "Ignore all
publisher margins" - and allow the same for paddings for books
that wrongly use paddings for that effect.
Main thumbnails and galleries items will float in "book" and
"web" modes.
Also use a honest User-Agent when requesting Wikipedia to
comply with their policy and avoid rate limitation (and
broken images).
- Updated "Avoid page break" tweaks to work on our latest epub.css.
- Added "New page on headings>" menu, as we no more break page on
H1, H2, H3 in EPUBs.
- Added "Center headings" as we no more have them centered.
- Added "Pure black and white" which can make some documents
more readable.
Adds "Render mode" toggle with 4 modes, to enable some or all
of crengine's new enhanced block rendering features.
Use "legacy" rendering for previously opened books to not mess
with bookmarks, and "web" (all of the new features) for new books.
Also make available the added "HTML5" stylesheet to the Style menu.
* Make toggling Gyro events more robust
Actually ask to turn it on/off depending on the setting, instead of a
blind toggle
A quick succession of suspend/resume events could otherwise leave it
in an unexpected state (i.e., off when it should have been on).
Specifically, how we ignore it.
No longer do anything specific and potentially racy, and let the
unexpected wakeup handler take care of putting us back to sleep.
Also add an option to only ignore wakeup events from the SleepCover.
Re #5098
Re #5087
For some mysterious reason, I have a duplicate default gateway on my
Forma, one with no metrics, and a proper one.
This ensures we pick the proper one.
I'm fairly sure this is temporary insanity on the part of my device,
but, still, it can't hurt.
route -n:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 208 0 0 eth0
192.168.0.0 0.0.0.0 255.255.255.0 U 208 0 0 eth0
ip r:
default via 192.168.0.1 dev eth0
default via 192.168.0.1 dev eth0 metric 208
192.168.0.0/24 dev eth0 src 192.168.0.49 metric 208
* Make the cover thumbnail respect the cover's AR in the widget
* Add a "Mark as read/unread" button in the FM's longpress menu.
* Make sure the cover_info cache is wiped if necessary (sidecar purge/BookInfo cache clear).
The contained widget may not have integer position/dimen
(which should probably be fixed in those that don't ensure
that), and our maths could eventually make them even more
shifted by fractional parts.
In the end, when closing the widget, the refresh code may
miss painting/cleaning 1px and leave a border of the widget
on the screen.
- Popup footnotes: workaround strange behaviour of MuPDF
which is adding some unwanted margin above elements
with an "id=" attribute.
- In-page footnotes: also remove any left and right margin,
to keep footnotes aligned with the main text.
Also add 2 classnames (witnessed in quite a few recent
french books) to the list of classic classnames.
- Also bump crengine: CSS: fix parsing of multi classnames
and attributes selectors
NiLuJe
poire-z
yparitcher
Martín Fernández
Frans de Jonge
Galunid
zwim
smartscripts-nl
sladflob
mwoz123
Robert
Sergey Avseyev
mergen3107
Jon
Rena Kunisaki
Matias Nitsche
bateast
Mustafa Ali Mutlu
WaseemAlkurdi
Mihai Vasiliu
Nick
Max CW
noEmbryo
Edoardo Putti
limerainne