Also tweak ReaderHighlight:onHoldRelease() to avoid
doing its stuff when onHold() is clearing highlight
(previous CheckButton was closing/clearing on hold
release, new TitleBar close button does that on hold).
- Book map: shows a map of content, including TOC,
boomarks, read pages, non-linear flows...
- Page browser: shows thumbnails of pages.
- ReaderThumbnail: new Reader module that provides
a service for generating thumbnails of book pages.
It makes available these 2 new fullscreen widgets.
- ReaderBookmark, ReaderLink, Statistics: add methods
to return new views of bookmarks, previous locations
and read pages, that are needed by BookMapWidget.
- ReaderToc: compute TOC max_depth.
- ReaderBookmark, ReaderHighlight: send events on
bookmark add/update/remove so thumbnails of the
pages impacted can be trashed.
When switching screen rotation, have the re-rendering
properly done only via :onUpdatePos().
When changing alt status bar font size, also have it
done via :onUpdatePos() instead of the next painting
(this also update any dogear position after the resize).
When in scroll mode (no alt status bar), be sure to
draw crengine progress bar at top (and not below the
not shown alt status bar).
Wrap document opening and re-renderings (which can block
the app for some time) with setIgnoreInput() to avoid ANR
on Android.
Any setting update that could possibly cause a re-rendering
should send the UpdatePos event, to ensure the re-rendering
happens in ReaderRolling:onUpdatePos() where precautions
are taken to avoid ANR.
Move Default and extra buttons above Cancel/OK.
Default values shown in the default button.
Precisions can be set for both values separately.
Minor geometry fix for consistence with SpinWidget.
Bookmark/highlight formats in crengine and mupdf are incompatible.
This backups and restores bookmarks and highlights when opening the
document with an incompatible engine, instead of deleting them.
Fuzzy searching doesn't work with CJK text: with Japanese,
we get large numbers of useless results because sdcv
decides to strip off the wrong part of the word.
It seems unlikely that sdcv correctly handles Korean
or Chinese, so just disable fuzzy searching on all
CJK-containing word lookups.
Add a "Select" button in the highlight dialog to initiate
text selection; on the next text selection, the text between
these 2 points will be selected.
Limited to a single page with non-CRE documents.
Also move "Search" button at end, so it's the one that
will be wide in case of an odd number of buttons.
It's possible for the user to have selected nothing, and trying to
operate on the nil highlight can cause confusion or crashes. This
restores the behaviour before commit 7a0e3d5e68 ("readerhighlight:
remove selected_word and use selected_text everywhere"), which missed
this case.
In addition, add some debug guards to ReaderHighlight methods which
cannot handle selected_text being nil (or at least, shouldn't be called
with selected_text being nil).
Fixes: 7a0e3d5e68 ("readerhighlight: remove selected_word and use selected_text everywhere")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Now that FileManager registers its UI modules in the same way as Reader,
this shouldn't be necessary but this protects us against some other app
creating a ReaderDictionary instance without having ui.languagesupport
registered properly.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
With the addition of the language support module, ReaderDictionary
tries to use modules registered with the UI instance, but the
FileManager doesn't provide key-based registration of its UI modules.
In order to allow the same code to be used by both FileManager and
Reader seamlessly, copy the :registerPlugin() method from Reader and use
it with FileManager. This will ensure any other hidden assumptions about
UI module registration are handled properly.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
- Add an icon to distinguish between page bookmarks, plain
highlights, and highlights with an added note
- Bookmark details: show both highlighted text and added note
- Bookmark list: allow filtering by type and/or by keyword
- New bookmark selection mode, to allow multiple removals
- New option: show separator line
This creates a new plugin system which hooks into a handful of reader
operations in order to allow plugins to add language-specific support
where the default reader falls short. The two hooks added are:
* During hold-without-pan taps, language plugins can modify the
selection in order to better match what users expect koreader to
highlight when selecting a single word.
The vast majority of CJK language words are more than one character,
but KOReader treats all CJK characters as a single word by default,
so adding this hook means that readers no longer need to manually
select the whole word every time they need to look something.
* During dictionary lookup, language plugins can propose alternative
candidate words to look up if the selected word could not be found in
the dictionary.
This is pretty necessary for Japanese and Korean, both of which are
highly agglutinative languages and the fuzzy searching system of
StarDict is simply not usable because often the inflection of the
word is so much longer than the dictionary form that sdcv decides to
chop off the actual word and search for the inflection (which yields
useless results).
This system is of particular interest for readers of CJK languages
(without this, looking up words using KOReader was fairly painful) but
this system is designed to be minimal and language-agnostic enough that
other languages could make use of it by creating their own plugins if
the default "whole word" highlight and fuzzy-search system doesn't match
their needs.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
In order to make startSdcv usable for plugins that might need to do
dictionary lookups in order to work, it is necessary to split out the
core of startSdcv into another method which returns the raw data from
sdcv.
In addition, in order to make it possible to amortise the cost of each
lookup (which could be fairly expensive) make it possible to pass
multiple words to rawSdcv at the same time. Sdcv supports passing
multiple words as arguments (which it then looks up in order and returns
a separate JSON array per line for each word) so we just need to tweak
the return style accordingly.
All of the deduplication and dummy results handling remains in startSdcv
because plugins might strongly depend on whether sdcv returned actual
results.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
There were two ways of specifing selected text for a highlight depending
on whether it was a "single word" or text selected using hold-and-pan.
In addition to being a bit more complicated than is necessary, with the
addition of the language support plugin system (where the "single word"
selected might be expanded), it makes more sense to simply use the same
logic and table structure for both cases.
The dictionary lookup special case (hold-without-pan triggering a
dictionary lookup by default) still works as before.
In addition, this patch fixes a minor inefficiency during dictionary
quick lookup -- before this patch, the highlight would be re-selected
because the quick lookup window is run concurrently and tries to fetch
ReaderHighlight.selected_text but this is set to nil immediately after
triggering the lookup. This is unnecessary because :clear() will be
called anyway when the quick pop-up closes, and so clearing this can be
left until then.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
* Use paintRect and plain colors instead of lightenRect and a weird
dimming factor.
* Update call sites to the new API
* Handle FP maths properly (i.e., floor coordinates & ceil dimensions at
the latest possible time).
* Fix border handling in the fill bar (make sure we actually honor it
when computin the x position, and that we won't overflow into it when
computing the width).
* Update docs
Bookmarks list:
- page numbers are displayed
- page bookmarks are marked with a star
- new setting: Sort by largest page number (default: checked)
New bookmark setting: Add page number / timestamp to bookmark
- If enabled (default), bookmark name is 'Page # notes @ time'.
- If disabled, bookmark name is equal to the notes field.
Rename bookmark dialog:
- page number and timestamp are displayed in the input
dialog description
- blank input renames bookmark to the default name in
accordance with the new setting
Also fix: changing boundaries of the highlight: the name of the
highlight is not changed if it was previously edited by the user.
Discussion in #6409.
Highlight action renamed to Long-press on text and moved from Gear - Document to Gear - Taps and gestures.
Added action Do nothing.
Removed menu item Typeset - Highlighting - Allow highlighting.
Fixed untranslated strings in the Cycle highlight action notification.
Long-press on images always opens ImageViewer. Closes#6409.
* Gestures: standardize hold to long-press
* Common settings menu: standardize hold to long-press
* Readerstyletweak: standardize hold to long-press
* Readersearch: standardize hold to long-press
Also: Text editor now closes its keyboard when calling Find
and Go to line (which open their own keyboards) to avoid
conflicts between multiple keyboards.
Includes among others:
- (Upstream) Various CHM handling fixes, and others
- HTML documents: rebuild TOC from headings after load
- Font: use metrics for underline offset and thickness
- epub.css, html5.css: tweak ruby styling
- CSS: fix EPUB's head>style content encoding
- CSS: add support for 'box-sizing: content-box/border-box'
- CSS: support for styling the <html> element
Also bump KoboUSBMS to v1.2.2 and FBInk to v1.24.0.
ReaderFont's "Generate font test document": update the
generated HTML so its ToC is build from proper HTML headings.
When enabled, if the book has some supported language tag
in its metadata, use it as the source language. Otherwise,
fallback to the current settings (auto-detect or selected
source language).
Go to the directory of the deleted file, instead of the folder you happend to switch into the reader from as this may have changed (via changing books from history etc)
Make "Taps and gestures - Page turns" available only in reader.
Move there other page turn related menu items from Navigation.
Remove duplicated code. Added standard "star" for default RTL.
TileCacheItem: add created_ts property.
Document: manage a tile_cache_validity_ts and ignore
older cached tiles.
This timestamps is updated when highlights are written
as annotations in, or deleted from, the PDF, so we can
get the most current rendered bitmap from MuPDF and
avoid highlight ghosts on old tiles.
Save this timestamp in doc settings so older cached to
disk tiles will also be ignored across re-openings.
Bump base for: mupdf.lua: update frontend pboxes with
MuPDF adjusted ones.
We may get multiple boxes when selecting texts, one for each
word, and we have to add spaces between the extracted words
ourselves. Previously, we were only adding a space if the
last char of previous word was ASCII, so missing spaces
after accents or greek words.
Try to do better by measuring the distances between boxes
and comparing to box heights, with a few heuristics.
Bump base for cre.cpp cleanup and utf8proc FFI.
Add a checkbutton for case sensitive search in FileBrowser,
and use Utf8Proc.lowercase() for case insensitive search.
Also use it in ReaderUserHyph as a replacement for
crengine getLowercasedWord().
- bump crengine: findText(): add support for regular
expression search.
- bump base: add thirdparty/srell/srell.hpp, a C++ library
that provides Unicode regex support, used by crengine.
- ReaderSearch: with credocuments, add checkboxes for case
sensitive and regular expression search.
Instead of baking in a hyphen, so as to avoid signed zeroes, or
confusion with page progress if page maps are enabled.
Also, made compact itemps RTL friendly.
Menu: display the right item ("mandatory") with a
smaller font size related to the left item font size,
instead of a function of perpage.
ToC popups: use same font size as in ToC.
Migrate *global* zoom_mode settings to genus/type, too.
Nothing can actually set this as a global anymore, but we still honored
it nonetheless.
Fix#7778
The hyphenation of a word can be changed from its default
by long pressing for 3 seconds and selecting 'Hyphenate'.
These overrides are stored in a per-language file, i.e:
koreader/settings/user-German.hyph.
By showing a warning, instead of not passing any -u flag to sdcv and letting it query *all* dictionaries if FS order...
Co-authored-by: Frans de Jonge <fransdejonge@gmail.com>
This is handled in an Event handler, but we have zero guarantee that
we're actually the *final* Event sent to the Document, and other Events
usually kinda need the Document instance to still be alive ;).
Delay action until the next tick to avoid potential crashes.
* Namely, ensure zoom_mode is consistent with genus & type *both ways*. (I only dealt with the "no zoom_mode" case in my original fixup).
Because documents with settings dating back from before the new zoom modes had "old" zoom_mode settings mixed with "new" genus/type defaults that didn't agree with each other.
It lead to super-confusing ConfigDialog behavior, because ConfigDialog was in fact not reflecting the reality.
(As the source of truth is actually `zoom_mode`).
* There was a snafu in manual mode, because of the extremely weird way prefixes are handled by Configurable/ReaderConfig/DocSettings/ConfigDialog.
So, make sure we only have a *single* zoom_factor, and that it's updated and saved properly under the right name everywhere.
Fixes inconsistencies between first swapping to manual mode, and what the ConfigDialog said/did (because again: possibly a lie), vs., re-opening the same document, which would magically use *different* settings, closer to what was expected (but still broken because of the prefix mismatch and a disagreement on defaults between the two variants).
Fallout from #6885
(i.e., when History is spawned from ReaderUI, delay the flash until we
*show* the next widget, instead of when we close the current RD
instance).
Prevents flashing the InfoMessage.
Notification: adds some functions so it can be used as
a notification manager.
Have various bits of code emitting events that may generate
notifications advertize themselves as the source for following
notifications.
Add a menu to allow selecting some subsets of sources
to show or hide.
Add a new reader module: ReaderScrolling, that exposes
some Scrolling options to the menu (which are to be used
by and implemented in ReaderPaging and ReaderRolling
themselves) and implement some inertial scrolling logic
used by both of them.
Default to "Classic scrolling" which is the expected
behaviour on phones and tablets.
The old CreDocument buggy behaviour is available as
"Turbo scrolling" for both Paging and Rolling documents.
Added a "On release scrolling" option that might be
useful on eInk to avoid dynamic pan/scrolling.
Try to avoid bad interactions between pan and swipe,
cancelling unwanted panning if we ended up doing a
swipe or multiswipe.
- TextWidget: avoid crash with small max_width (could happen
when opening menu on a small emulator window)
- TextWidget: avoid crash if re-used after :free()
- ReaderHighlight:clear(): fix possible crash when
scheduled and run after document closed
- DictQuickLookup: minor canSearch() tweak ('selected_text'
is normally available only on multiple words selection,
but is currently available on single word selection thanks
to some unrelated side effect)
Whith the new font size step of 0.5 (46a2d9c), the gesture
for increasing or decreasing font size would change the
size by only half of the given value.
* Tear down FM instances properly
* Don't manhandle ReaderUI too much, and document when the tests do
actively broken shit, like bypassing safeties to open two // ReaderUI
instances.
Namely, instead of making it lower priority than readerhighlight and
hoping for the best, make it higher priority, as it should (ReaderFooter
itself is *above* Reader, after all), with a sane set of fallthroughs:
* No footer
* No hold-to-skim
* Held outside the footer (but inside the footer tap zone)
This made the crap workaround from #7466 unnecessary, and actually fixes
the behavior in PDFs (because readerhighlight will match the *physical*
page, which may include off-screen content) and ePubs w/r eclaim bar
height (in which case, there's actual content behind the footer that
readerhighlight could have matched on).
Fix#7697
We've managed to trip a few of those on dimen fields post-init but
pre-paintTo in a few weird coner-cases, a point at which dimen is often
nil.
ConfigDialog: Deal with that very thing in update()
Fix#7656
A dotted line joining the ToC entry text to the
page number may make it easier to use.
(This replaces the menu item separator from d879062e.)
Also fix baselines aligment, which could be a bit off.
* FileManager/ReaderUI: Clarify the current instance accessor
Make it clearer that we actually store it in a *module/class* member, not an *instance* member.
Also, warn if there's a close/open mismatch.
Ought to be faster than our naive array-based approach.
Especially for the glyph cache, which has a solid amount of elements,
and is mostly cache hits.
(There are few things worse for performance in Lua than
table.remove @ !tail and table.insert @ !tail, which this was full of :/).
DocCache: New module that's now an actual Cache instance instead of a
weird hack. Replaces "Cache" (the instance) as used across Document &
co.
Only Cache instance with on-disk persistence.
ImageCache: Update to new Cache.
GlyphCache: Update to new Cache.
Also, actually free glyph bbs on eviction.
* Minor updates to the min & max cache sizes (16 & 64MB). Mostly to satisfy my power-of-two OCD.
* Purge broken on-disk cache files
* Optimize free RAM computations
* Start dropping LRU items when running low on memory before pre-rendring (hinting) pages in non-reflowable documents.
* Make serialize dump the most recently *displayed* page, as the actual MRU item is the most recently *hinted* page, not the current one.
* Use more accurate item size estimations across the whole codebase.
TileCacheItem:
* Drop lua-serialize in favor of Persist.
KoptInterface:
* Drop lua-serialize in favor of Persist.
* Make KOPTContext caching actually work by ensuring its hash is stable.
* Ensure that going from one to the other tears down the former and
its plugins before instantiating the latter and its plugins.
UIManager: Unify Event sending & broadcasting
* Make the two behave the same way (walk the widget stack from top to
bottom), and properly handle the window stack shrinking shrinking
*and* growing.
Previously, broadcasting happened bottom-to-top and didn't really
handle the list shrinking/growing, while sending only handled the list
shrinking by a single element, and hopefully that element being the one
the event was just sent to.
These two items combined allowed us to optimize suboptimal
refresh behavior with Menu and other Menu classes when
opening/closing a document.
e.g., the "opening document" Notification is now properly regional,
and the "open last doc" option no longer flashes like a crazy person
anymore.
Plugins: Allow optimizing Menu refresh with custom menus, too.
Requires moving Menu's close_callback *after* onMenuSelect, which, eh,
probably makes sense, and is probably harmless in the grand scheme of
things.
* PluginLoader: Allow querying whether a specific plugin is loaded (instantiated, actually).
Re #7598
* PluginLoader: Add a method to access a specific Plugin's instance
(Besides `self.ui[plugin_name]`, that is).
Requires some nastiness to avoid pinning stale references in memory :s.
* PluginLoader: Tweak genPluginManagerSubItem to keep from rebuilding `self.all_plugins`, it's using `loadPlugins`, which is cached, so it made no sense to re-compute this one.
Includes:
- MathML: a few minor fixes
- (Upstream) lvtext: fix possible index out of range
- Fonts: RegisterExternalFont() should take a documentId
- Fonts: fix: letter-spacing should not be applied on diacritic
- (Upstream) Fonts: more granular synthetic weights
- Fonts: synthesized weights: tweak some comments
- Fonts: keep hinting with synthetic weight
- Fonts: fix synthesized weight inconsitencies
- Fonts: fix getFontFileNameAndFaceIndex()
- Fonts: adds LVFontMan::RegularizeRegisteredFontsWeights()
- Fonts: handle synth_weight tweaks in glyph/glyphinfo slots
- (Upstream) Fonts: fix some compiler warnings
- Fix hyphenation on Armenian and Georgian text
Update the bottom menu widget "Font Weight" to allow more
granular weights than the previous "regular | bold".
Also bump thirdparty/luasec to v1.0.1.
Similar in spirit to the previous commit, although since we're drawn as
part of the CRe page, this is just the refresh per-se that's optimized,
it had no chance to actually be visible.
Make sure we don't repaint the footer over anything else than ReaderUI,
as some events are fired without direct UI interaction, so we can't be
assured of the actual state of the UI.
Fix#7556
Exposed since #7379, but could arguably happen with other existing
handlers before.
* Support cancelling individual moves.
Coopt the cancel button to actually do just that, cancel, instead of close.
* Don't close when hitting the accept button, allowing to chain multiple moves.
Changes are still propagated to the caller on each individual move, though.
* Update the new icons to match our usual stroke width.
* ReaderToc: Tweak padding around items to be a tad more balanced for multi-level ToCs, and perfectly balanced for flat ToCs. (Re #7548)
* ReaderToc: Make the onHold popup's width match said padding. (Re #7548)
* InfoMessage: Allow passing the alignment flag to TextBoxWidget
* ReaderToc: Center text inside the InfoMessage onHold popup
* Input: Don't create a new TimeVal object for input frame timestamps, just promote our existing table by assigning it the `TimeVal` metatable.
* TimeVal: Export (const) `zero` & `huge` TimeVal objects, because they're common enough in our codebase. (NOTE: not actually const, that's a Lua 5.4 feature ;p).
* GestureDetector: Explain the behavior of the `last_tevs` & `first_tevs` tables, and why one needs a new object and not the other.
* Speaking of, simplify the copy method for `first_tevs`, because it doesn't need to create a new TimeVal object, we can just reference the original, it's unique and re-assigned for each frame.
There have been a couple of these this month, and keeping stuff that should only ever run once piling up in their respective module was getting ugly, especially when it's usually simple stuff (settings, files).
So, move everything to a dedicated module, run by reader.lua on startup, and that will actually only do things once, when necessary.
Attempting to update a highlight when matching on a bookmark doesn't
make sense, and no longer works since #7411
Also, switch to ipairs(), and stop piggybacking on a new local that
shadows or uses the function's item argument.
It works in Lua, but it's super weird and error-prone.
Fix#7520 (regression since #7411).
Generic feature added to TouchMenu: an optional callback
'open_on_menu_item_id_func()' set on an items table can
tell which menu item should be shown when opening a menu.
TouchMenu: allows jumping to first or last page with
long-press on the chevrons.
* Change 'Find a file' to 'File search' for consistency
There is 'File search' in the Gesture manager already.
There is 'Fulltext search' in the readermenu.
Some help text added.
It appears the fancy split settings from #6885 were not being honored at all.
Also:
* Made sure "pagewidth" is actually the default zoom mode again, "full" had sneaked in as the default state of the zoom type toggle).
* Display human-readable values in the "Make as default" popup, instead of the raw, meaningless numerical setting.
* Disable zoom options when reflow is enabled, and restore 'em properly when it's disabled.
Fix#7461, #7228, #7192
* ReaderDictionary: Port delay computations to TimeVal
* ReaderHighlight: Port delay computations to TimeVal
* ReaderView: Port delay computations to TimeVal
* Android: Reset gesture detection state on APP_CMD_TERM_WINDOW.
This prevents potentially being stuck in bogus gesture states when switching apps.
* GestureDetector:
* Port delay computations to TimeVal
* Fixed delay computations to handle time warps (large and negative deltas).
* Simplified timed callback handling to invalidate timers much earlier, preventing accumulating useless timers that no longer have any chance of ever detecting a gesture.
* Fixed state clearing to handle the actual effective slots, instead of hard-coding slot 0 & slot 1.
* Simplified timed callback handling in general, and added support for a timerfd backend for better performance and accuracy.
* The improved timed callback handling allows us to detect and honor (as much as possible) the three possible clock sources usable by Linux evdev events.
The only case where synthetic timestamps are used (and that only to handle timed callbacks) is limited to non-timerfd platforms where input events use
a clock source that is *NOT* MONOTONIC.
AFAICT, that's pretty much... PocketBook, and that's it?
* Input:
* Use the <linux/input.h> FFI module instead of re-declaring every constant
* Fixed (verbose) debug logging of input events to actually translate said constants properly.
* Completely reset gesture detection state on suspend. This should prevent bogus gesture detection on resume.
* Refactored the waitEvent loop to make it easier to comprehend (hopefully) and much more efficient.
Of specific note, it no longer does a crazy select spam every 100µs, instead computing and relying on sane timeouts,
as afforded by switching the UI event/input loop to the MONOTONIC time base, and the refactored timed callbacks in GestureDetector.
* reMarkable: Stopped enforcing synthetic timestamps on input events, as it should no longer be necessary.
* TimeVal:
* Refactored and simplified, especially as far as metamethods are concerned (based on <bsd/sys/time.h>).
* Added a host of new methods to query the various POSIX clock sources, and made :now default to MONOTONIC.
* Removed the debug guard in __sub, as time going backwards can be a perfectly normal occurrence.
* New methods:
* Clock sources: :realtime, :monotonic, :monotonic_coarse, :realtime_coarse, :boottime
* Utility: :tonumber, :tousecs, :tomsecs, :fromnumber, :isPositive, :isZero
* UIManager:
* Ported event loop & scheduling to TimeVal, and switched to the MONOTONIC time base.
This ensures reliable and consistent scheduling, as time is ensured never to go backwards.
* Added a :getTime() method, that returns a cached TimeVal:now(), updated at the top of every UI frame.
It's used throughout the codebase to cadge a syscall in circumstances where we are guaranteed that a syscall would return a mostly identical value,
because very few time has passed.
The only code left that does live syscalls does it because it's actually necessary for accuracy,
and the only code left that does that in a REALTIME time base is code that *actually* deals with calendar time (e.g., Statistics).
* DictQuickLookup: Port delay computations to TimeVal
* FootNoteWidget: Port delay computations to TimeVal
* HTMLBoxWidget: Port delay computations to TimeVal
* Notification: Port delay computations to TimeVal
* TextBoxWidget: Port delay computations to TimeVal
* AutoSuspend: Port to TimeVal
* AutoTurn:
* Fix it so that settings are actually honored.
* Port to TimeVal
* BackgroundRunner: Port to TimeVal
* Calibre: Port benchmarking code to TimeVal
* BookInfoManager: Removed unnecessary yield in the metadata extraction subprocess now that subprocesses get scheduled properly.
* All in all, these changes reduced the CPU cost of a single tap by a factor of ten (!), and got rid of an insane amount of weird poll/wakeup cycles that must have been hell on CPU schedulers and batteries..
* Add a new socketutil module with a few helper functions that allow us to:
* Always use a sane User-Agent (previously, only Wikipedia did so)
* Set timeouts in an almost sane manner. Doing it explicitly prevents an interaction with KOSync that does crazy stuff I don't even want to try to understand.
* Unified said timeouts based on the request's intended usage (except for Wikipedia, which already had meaningful timeout values).
* Stopped using LuaSec directly, LuaSocket defers to LuaSec sanely on its own. Everything now transparently supports HTTPS without code duplication.
* Screensaver: Unbreak screensaver_stretch_images
We don't have real ternary operators in Lua, if the second argument evaluates to false, it doesn't work.
Invert the test to avoid this pitfall.
(c.f., http://lua-users.org/wiki/TernaryOperator).
Fix#7402, regression since #7371
* Free a few similar constructs (incidentally, some of 'em also tweaked in #7371 ^^).
* LuaSettings/DocSettings: Updated readSetting API to allow proper initialization to default.
Use it to initialize tables, e.g., fixing corner-cases in readerFooter that could prevent settings from being saved.
(Fixes an issue reported on Gitter).
* LuaSettings/DocSettings: Add simpler API than the the flip* ones to toggle boolean settings.
* Update LuaSettings/DocSettigns usage throughout the codebase to use the dedicated boolean methods wher appropriate, and clean up some of the more mind-bending uses.
* FileChooser: Implement an extended default exclusion list (fix#2360)
* ScreenSaver: Refactor to avoid the pile of kludges this was threatening to become. Code should be easier to follow and use, and fallbacks now behave as expected (fix#4418).
Instead of piggybacking on InputContainer's onInput trickery for hold_input & tap_input.
Also, don't flag the buttons from that InputDialog as vsync, because that was stupid ;).
Fix#7357
* Menu/KeyValuePage/ReaderGoTo: Unify the dialogs. (Generally, "Enter page number" as title, and "Go to page" as OK button).
* Allow *tapping* on pagination buttons, too. Added spacers around the text to accommodate for that.
* Disable input handlers when <= 1 pages, while still printing the label in black.
* Always display both the label and the chevrons, even on single page content. (Menu being an exception, because it can handle showing no content at all, in which case we hide the chevrons).
* KVP: Tweak the pagination buttons layout in order to have consistent centering, regardless of whether the return arrow is enabled or not. (Also, match Menu's layout, more or less).
* Menu: Minor layout tweaks to follow the KVP tweaks above. Fixes, among possibly other things, buttons in (non-FM) "List" menus overlapping the final entry (e.g., OPDS), and popout menus with a border being misaligned (e.g., Calibre, Find a file).
* CalendarView: Minor layout tweaks to follow the KVP tweaks. Ensures the pagination buttons are laid out in the same way as everywhere else (they used to be a wee bit higher).
Tweak building to start from items per page instead of
a fixed item height.
Guess the best font size that fit.
Update separator specification from using a "----" to
the now generic separator=true (this allows not wasting
a slot for each separator in the page and not have
only 12 items and 2 small lines in a 14 items page).
Remove the title bar, as it was just taking uneeded
space over the book content.
Add a middle button in the top row to toggle bookmark
for the current page.
Rework the UI building to get more consistent and
aligned buttons and progress bar.
Move SkimToWidget from apps/reader/ to ui/widgets/.
* Simplify flash_ui handling (by handling the unhighlight pre-callback, c.f., #7262 for more details).
* UIManager: Handle translucent window-level widgets (and those wrapped in a translucent MovableContainer) properly in setDirty directly, making sure what's *underneath* them gets repainted to avoid alpha layering glitches. (This was previously handled via localized hacks).
* Update UIManager's documentation, and format it properly for ldoc parsing, making the HTML docs more useful.
* ReaderView: Reinitialize the various page areas when opening a new document, to prevent poisoning from the previous document.
* Event: Handle nils in an event's arguments.
* CheckButton/RadioButton: Switch to simple inversion to handle highlighting
* CheckButton: Make the highlight span the inner frame's width, instead of just the text's width, if possible.
* AlphaContainer: Fix & simplify, given the UIManager alpha handling.
* MovableContainer: When translucent, cache the canvas bb used for composition.
* Avoid spurious refreshes in a few widgets using various dummy *TextWidgets in order to first compute a text height.
* KeyValuePage: Avoid floats in size computations.
* In ReaderPaging, the panning step pre-PanningUpdate can be wildly overshot near page edges, so, use the corrected value instead by recomputing it after the panning has been effectively computed by ReaderView.
This fixes slight inaccuracies, as well as glaring mistakes when going backwards, or when near page edges.
This is in line with how ReaderRolling computes the value, which I only realized later because I'm an idiot.
* Minor cleanups around the handling of the dim_area Geom object in general.
* Fix the "Arrow" page overlap mode to be painted in the right coordinates when going backward. Issue might not have been terribly clear because of the previous issue ;).
* Center the arrow's point, while we're here.
* Don't use AlphaContainer to make it translucent, because AlphaContainer is horribly broken, and has weird quirks and behavior that make no sense to me unless some very specific and unlikely constraints are met, and they definitely aren't here.
This fixes the arrow copying an arrow-sized square of the original page the book was opened on on the top-left corner of *every* page with an arrow. (lol).
* Do real proper alpha-blending via Icon/ImageWidget from the original icon, instead of faking it via addBlitFrom, in order to avoid the dimming *around* the triangle's shape.
- Menu widget: allow specifying the number of items per
page and the item font size, so we can use other values
than the default File browser ones
- Menu: fix setDirty when a border is used
- ToC: add item per page and font size settings, make
Alternative ToC more visible (was previously
available on long-press on Table of contents)
- Bookmarks: add item per page, font size, size reduction
- Progress bars (Skim widget and footer): allow selecting
ToC depths from which ticks are made.
When opening a document in scroll mode with an invalid
last_xpointer.
This code path was never taken before 05126b94, and it has
never been updated to pass the page number in scroll mode
(so it's provided to the footer) like it has been in other
places.
* DictQuickLookup: Preserve alpha when switching dict, and scrolling
inside a dict.
* Start moving the NumberPicker alpha hack to Button itself
This makes handling flash_ui easier and saner, avoiding flickering.
* Handle the transparency hack entirely from within Button
* Murder the now unnecessary NumberPicker update_callback hack
* Tweak comments
* And the Button handling made that redundant, too
* Squish debug print
* More comment tweaks
* Reset transparency on scrolling instead of rpeserving it
* Reset alpha when switching dictionaries
* Simplify the pre/post callbakc transparency state handling
And explain why we need to care.
* Give a named reference to ButtonDialog's MovableContainer, so the Button
alpha hack behaves with it
* Document the "self.movable" convention
* Amend that comment a bit
e.g., we don't care much about MultiConfirmBox'w MpvableContainer, as
any button action will close it.
* And make SkimTo's MovableContainer accessible so that Button can grok
that it's translucent
Rework Dual pages code so that the view is considered
a single page number, so it looks more like 2-columns
on a single page.
This solves a few issues like:
- Page number and count are consistent between top
and bottom status bars
- SkimTo -1/+1 doing nothing every other tap
- Statistics being wrong (like "Pages read" never
going over half of the book page count)
* QuickDictLookup, ImageViewer, NumberPicker: Smarter `update` that will re-use most of the widget's layout instead of re-instantiating all the things.
* SpinWidget/DoubleSpinWidget: The NumberPicker change above renders a hack to preserve alpha on these widgets almost unnecessary. Also fixed said hack to also apply to the center, value button.
* Button: Don't re-instantiate the frame in setText/setIcon when unnecessary (e.g., no change at all, or no layout change).
* Button: Add a refresh method that repaints and refreshes a *specific* Button (provided it's been painted once) all on its lonesome.
* ConfigDialog: Free everything that's going to be re-instatiated on update
* A few more post #7118 fixes:
* SkimTo: Always flag the chapter nav buttons as vsync
* Button: Fix the highlight on rounded buttons when vsync is enabled (e.g., it's now entirely visible, instead of showing a weird inverted corner glitch).
* Some more heuristic tweaks in Menu/TouchMenu/Button/IconButton
* ButtonTable: fix the annoying rounding issue I'd noticed in #7054 ;).
* Enable dithering in TextBoxWidget (e.g., in the Wikipedia full view). This involved moving the HW dithering align fixup to base, where it always ought to have been ;).
* Switch a few widgets that were using "partial" on close to "ui", or, more rarely, "flashui". The intent being to limit "partial" purely to the Reader, because it has a latency cost when mixed with other refreshes, which happens often enough in UI ;).
* Minor documentation tweaks around UIManager's `setDirty` to reflect that change.
* ReaderFooter: Force a footer repaint on resume if it is visible (otherwise, just update it).
* ReaderBookmark: In the same vein, don't repaint an invisible footer on bookmark count changes.
* I'd failed to notice that ButtonTable *also* instantiates seven billion Buttons on each update. Unfortunately, that one is way trickier to fix properly, so, work around its behavior in Button. (This fixes multiple issues with stuff using ButtonTable, which is basically anything with a persistent set of buttons. A good and easy test-case is the dictionary popup, e.g., the Highlight button changes text, and the next/prev dic buttons change state. All that, and more, was broken ;p).
* Handle corner-cases related to VirtualKeyboard (e.g., Terminal & Text Editor), which screwed with both TouchMenu & Button heuristics because it's weird.
* Flag a the dictionary switch buttons as vsync
(They trigger a partial repaint of the dictionary content).
* Flag the ReaderSearch buttons as vsync
They very obviously trigger a partial repaint, much like SkimTo ;p.
Fixes#6866.
Replace InputContainer with FocusManager for easier DPad Handling.
Add ProgressBar jump via key Q to P, corresponds with 0% to 100%.
Tested on K3 and SDL. Should be safe for devices with touch.
Hide bottom panel when showing a SpinWidget, so we gain
on the bottom the space covered by the SpinWidget to see
more how a change is affecting the book text.
For clarity, rename delay_repaint & refresh_callback
to hide_on_apply & when_applied_callback.
Normalize SpinWidgets: have them both accept a
cancel_callback and a close_callback.
InfoMessage: call dissmiss_callback also on timeout.
Rework eb66856d so that "Sync T/B Margins" is disabled
when set Top and Bottom margins differ (previously,
the bottom one was taking over the top one when
it was enabled).
Make Notification have toast=true, and UIManager deal
specifically with such widget:
a "toast" widget gets closed by any event, and let
the event be handled by a lower widget.
This should allow us to not wait or tap to get rid
of a notification, and just go on with what we're
doing.
Also make them have a default timeout of 2s,
used with all existing ones.
* Wherever possible, do an actual dumb invert on the Screen BB instead of repainting the widget, *then* inverting it (which is what the "invert" flag does).
* Instead of playing with nextTick/tickAfterNext delays, explicitly fence stuff with forceRePaint
* And, in the few cases where said Mk. 7 quirk kicks in, make the fences more marked by using a well-placed WAIT_FOR_UPDATE_COMPLETE
* Fix an issue in Button where show/hide & enable/disable where actually all toggles, which meant that duplicate calls or timing issues would do the wrong thing. (This broke dimming some icons, and mistakenly dropped the background from FM chevrons, for example).
* Speaking of, fix Button's hide/show to actually restore the background properly (there was a stupid typo in the variable name)
* Still in Button, fix the insanity of the double repaint on rounded buttons. Turns out it made sense, after all (and was related to said missing background, and bad interaction with invert & text with no background).
* KeyValuePage suffered from a similar issue with broken highlights (all black) because of missing backgrounds.
* In ConfigDialog, only instanciate IconButtons once (because every tab switch causes a full instantiation; and the initial display implies a full instanciation and an initial tab switch). Otherwise, both instances linger, and catch taps, and as such, double highlights.
* ConfigDialog: Restore the "don't repaint ReaderUI" when switching between similarly sized tabs (re #6131). I never could reproduce that on eInk, and I can't now on the emulator, so I'm assuming @poire-z fixed it during the swap to SVG icons.
* KeyValuePage: Only instanciate Buttons once (again, this is a widget that goes through a full init every page). Again, caused highlight/dimming issues because buttons were stacked.
* Menu: Ditto.
* TouchMenu: Now home of the gnarliest unhilight heuristics, because of the sheer amount of different things that can happen (and/or thanks to stuff not flagged covers_fullscreen properly ;p).
* Bump base
https://github.com/koreader/koreader-base/pull/1280https://github.com/koreader/koreader-base/pull/1282https://github.com/koreader/koreader-base/pull/1283https://github.com/koreader/koreader-base/pull/1284
* Bump android-luajit-launcher
https://github.com/koreader/android-luajit-launcher/pull/284https://github.com/koreader/android-luajit-launcher/pull/285https://github.com/koreader/android-luajit-launcher/pull/286https://github.com/koreader/android-luajit-launcher/pull/287
Rework b66d0be3 and 6205f260 by making that simpler
to comprehend:
- If interruption or search result window is shown in
less than 3 secondes: no specific tweak, a tap outside
will dismiss everything instantaneously.
- If done after 3 seconds: show the interruption or result
window, and discard input for a few 100ms.
- UIManager:discardEvents(): increase a bit default delays.
Restore feature removed in c98dfef7: tap on title
to set dict of current result as a preferred dictionary
for this document.
Changes from former implementation:
- trust sdcv for ordering, instead of doing it ourselves
by looking at the results (which didn't always work)
- allow setting multiple preferred dicts
- order of preference is shown with a number as a prefix
to the dictionary name in the title
- taping again allows removing it from preferred dicts,
and taping again allows setting it back as the first
preferred dict
* Flush mode to settings ASAP when an unrelated option updates the mode.
Fixes, among other things, *enabling* the progress bar while the status
bar is hidden: this showed it, but kept mode as "off".
* Don't stomp on the current mode when toggling the progress bar.
And *always* pop the status bar back up to see the difference, even if
it's hidden.
This used to be done only when *enabling* the progress bar.
Add UIManager:discardEvents(), to allow dropping events
for a period of time.
Default duration of 600ms on eInk, 300ms otherwise.
Used when showing the dict result window, so that a tap
happening just when it's being shown won't discard it.
Used with Trapper:confirm()/:info(), to avoid taps made
in a previous processing to dismiss (and so, select the
cancel action) a ConfirmBox not yet painted/visible.
Don't cleanup input text as much when entered manually
(or when it's sane) than when coming from book text
selection.
This may allow looking up words like "-suffix", or
do more precise Wikipedia queries.
Brainfart from 6162c287e8
Forgot to zap the original UIManager:show(), so we were stacking two
identical widgets on top of each other, which obviously affected alpha.
Re #7029
- Rework widget layout to avoid implicit (and wrong)
sizing, using proper padding/margins and correct
measurements of components.
- Adjust lookup word font size so it's not smaller
than the definition.
- Tweak small window positionning: keep it centered
if possible, only move it to keep the highlighted
word shown when we can.
- Large window: adjust to screen size correctly,
leaving room for footer.
- Always have a "Close" button at bottom right.
Former always displayed button "Follow link" will
be added as a 3rd row in the rare case we select
a word in a link.
- Replace "tap on lookup word to edit and redo the
query" with an icon on the right: tap on it to
edit the queries word, long-press to edit the
current result word. Only close the current dict
window when lookup is launched.
- Remove feature "tap on title to set current dict
as the default dict for this document", as it didn't
really work, and it was bad UX.
If interrupted quickly just after lookup launch, don't
display anything (this might help avoiding refreshes
and the need to dismiss after accidental long-press
when manipulating the device).
- InfoMessage: add an option show_delay.
- MovableContainer: avoid possible crash when
not yet painted.
- ReaderDictionary: use show_delay=0.5 instead of
scheduleIn(0.5n...) (a5b133da) as we need the
InfoWidget to be known to UIManager to catch tap
and allow interrupting lookups properly.
- ReaderDictionary: rework handling of no_refresh_on_close
(6162c287) with proper regions comparisons
Drop the use of crengine's getWordFromPosition() which
is a bit unreliable: it may returns wrong coordinates,
or words from far away in the book (ie. when holding
in the margins).
Rely only on the robust getTextFromPositions() that
we already use for multi words selection.
Having good coordinates allows refreshing a smaller region
(the higlighted word, or the 2 lines if hyphenated).
That way images can be made to work in a more generic, portable manner, such as:
```
return function(html, dict_path)
html = html:gsub('<rref[^>]*>([^<]*%.jpg)</rref>', '<img src="'..dict_path..'res/%1">')
return html
end
```
Cf. <https://github.com/koreader/koreader/issues/6056>.
- Add IconWidget, use it for icons instead of ImageWidget.
Specify icons by name only, look for them (with either
.svg or .png suffixes) in multiple directories (including
koreader/settings/icons/ to allow customizing them).
Don't crash when icon name not found, shown a black
background warning icon instead.
- Don't trust the icons' native sizes: replace
scale_for_dpi=true with width/height=DGENERIC_ICON_SIZE,
so all icons get the same (tunable) size - except in
a few specific use cases.
- Top and bottom menu bars: normalize, and have icons
properly centered in them, extend vertical line
separators up to the edges.
- TOC: adjust expand/collapse icons size to items size
* ReaderFooter:
* Honor the global twelve_hour_clock setting, instead of
duplicating a local one.
(Re #6969)
* os.date is a thin wrapper around strftime, so we might be able to get
away with some not-quite-standard extensions...
These are *definitely* supported on Linux, but are *NOT* the glibc
extension (that'd be e.g., %-I), so, hopefully, they're somewhat
portable...
They are also supported on BSD/macOS.
They are *not* supported by the MS UCRT. That means MinGW-w64, too.
This *appears* to be supported on current Bionic (it might even support
said glibc format altering extensions).
* And of course, Windows is terrible, so, make this terribly ugly to not
break it there...
* Turns out BSD also supports the dash trim format extension, so, leave
the trimming to the libc, and handle the special-casing in a way that
doesn't create stupid locals.
* Random unrelated cleanup ^^.
(https://gitter.im/koreader/koreader?at=5fd24be492aa1c4ef5d11f31)
* Update the testsuite
(Because the default used to be 24h clock).
Changed the default to 24h clock ;p.
* Explain why we don't try to fix it in Lua
* ReaderDictionary: Don't refresh when dimissing the lookup info
InfoMessage
Re #6932
* Fix dict_largewindow in Landscape
Have to leave some room for the UI chrome
* Top menu & bottom menu tapzones are now full-width, thanks to the now sane override system.
* A separate, extra tapzone was also created for each of them to provide a taller, but narrower tapzone extension (one that doesn't clash with the prev/next tapzones).
* The footer tapzone was made much taller.
nextTick was too early ;).
Prevents small hitches when turning the page for the page where this
triggers.
Apply the same trickery to the Stats DB insert, even if that one probably
had a much smaller impact.
* Warn on restart if the startup script has been updated, because a restart will not reload it.
* Also warn right after the update if it contained a startup script update...
- Move zoom options from top menu to bottom config
- Add option to manually define zoom (relative to
page width) and overlap (in percent)
- Add options to zoom to columns or rows, possibly
with overlap. Add panning direction options when
page forward in these modes
Some stuff was still hacked on manually instead of trusting the widget system to do things right, which it does, if you update the right stuff at the right time the right way ;). *This Is The Way*.
Fix#6893 (and address https://github.com/koreader/koreader/pull/6878#discussion_r523411883, because it was indeed redundant ^^).
Includes a bonus fix for a number of (footer) settings not being applied immediately in PDFs.
Add option to hide (skip) non-linear fragments, only working
in 1-page mode. Tweaks mostly to footer, toc and skim code
to make it clear(er) which pages belong to linear or non-linear
fragments.
* Use a CRe set* method when toggling nightmode
This ensures it gets flagged as add_reset by the call cache, and that
CRe will actually re-render, as it's necessary if nightmode_images is
enabled (the default).
Fix#6845
* Prevent ReaderHighlight:onTap from running ReaderHighlight:clear when
it's unnecessary.
Avoiding a clearSelection call in CRe that could invalidate the cache
and cause unnecessary redraws.
* Don't store empty highlight arrays when all HLs on a page have
been deleted
Have ReaderBack be the sole handler of onBack.
Add 4 mutually exclusive options for the Back key,
to avoid ReaderLink and ReaderBack location stacks
from interfering (ReaderBack's stack being always a
superset of ReaderLink's stack).
So, remove "Enable back history", which is replaced
by Back option "Go to previous read page".
Fix a few possible crashes and inconsistencies (when
zoom, scroll or reflow have changed) with ReaderPaging
and ReaderView when restoring previous page/view.
* When auto_refresh_time is enabled, don't actually refresh anything when the footer is hidden.
* Fix a bunch of state tracking related to height computations, meaning `getHeight()` is now actually accurate, always, and we don't need shitty workarounds anymore.
* `footer_container.dimen.h` *includes* the progress bar, so, never reset it to 0 unless the progress bar is disabled (some `settings.progress_bar_position` codepaths were mistakenly doing just that).
* More aggressively set/reset `footer_text.height` (not sure this one makes much of a difference, and/or if it's actually useful at all, but, the tracking was already there, but hella inconsistent, so, just fix it).
* Honor `settings.reclaim_height` in other bits of code that were only checking `footer_visible` to figure out the visible page area.
* Ask ReaderView to update the `visible_area` *now* when toggling the footer's visibility (for ReaderPaging).
* Update the data collection format & handler to make it much less tortuous
* Update the pagecount & resync the stats on document layout changes
* Update the database schema to allow doing most queries against a SQL view that rescales the collected data to be accurate regardless of document layout (thanks to @marek-g for the SQL magic ;)).
* Add a "reset stats for current book" entry in the list of reset options, one that won't horribly break stats in said book ;).
* Fixed a couple of resource (SQL connection) leaks (in ReaderStatistics:getCurrentBookStats & ReaderStatistics:getCurrentBookStats).
* Flush stats to the DB on periodical metadata saves.
* Minor cosmetic tweaks to the code
Includes:
- (Upstream) various unimpacting changes to keep in sync
- (Upstream) Fix issues with legacy text rendering
- (Upstream) FB3/DocX/ODT: get lang and description metadata
- (Upstream) remove some global settings, make them per-doc
- TextLang, hyphenation: add Armenian, Friulian, Piedmontese,
Romansh, Zulu and Brazilian Portuguese.
Also make cre the prefered engine for .xhtml (over MuPDF)
and for .xml (which might be HTML).
* In icons mode, just use two different icons to display Wi-Fi status
* Enable Wi-Fi status icon on Kobo & Cervantes, too
* Refresh footer on (dis)connect if the Wi-Fi status item is enabled
This pull requests aims to provide convenient way to zoom in comics. The idea is when user holds/double taps (not decided yet) on a manga/comic panel, it gets cut out from the rest of the image and zoomed. More details in koreader/koreader-base#1148. Depends on koreader/koreader-base#1159
Includes:
- Update German hyphenation patterns
- (Upstream) Adds ODT (ODF) format support
- TextLang, hyphenation: add Basque, Croatian, Esperanto,
Estonian, Georgian, Latvian, Lithuanian, Macedonian,
Occitan, Welsh; update Bulgarian, Irish, Portuguese,
Slovak, Dutch, Norwegian, Spanish; update hyphen min
for Czech, English, Greek; fix Romanian and Ukrainian
pattern file names
- HyphMan: adds HyphMethod::getLeft/RightHyphenMin()
- epub.css: update HR default style
- fb2.css: keep <date> in main text left-aligned
- getRenderedWidths(): inline-block and table fixes
- CSS: avoid style hash mismatch when serializing content:''
- Tables: re-order row groups when necessary
- XML parsing: don't drop trailing text
- HTML parser: tweak implicit head/body insertion code
- Fix text search failure when blank at start or end
readertypography.lua: some cleanup by removing the first
table listing hyph dicts, and including their filenames
in the second table so we can build the first table
dynamically. Also fetch hyph left/right min limits from
crengine to not have to duplicate them here and keep them
in sync.
css_tweaks.lua: for in-page footnotes, switched from
"-cr-only-if: epub-document" to ": -fb2-document"
("not" FB2 documents), so these tweaks also work with
DocX and ODT footnotes.
Also included in base bump:
- KOPTContext: add comic panel detection function/additional
leptonica declarations
- Forcibly disable docs when building giflib
In the "Set footnote popup font size", allow toggling
between setting a relative (to the document) font size
and setting an absolute font size (that won't change
with the document font size).
Since 8815cbe0 and getSafeFilename() taking additional
parameters, and :gsub() returning multiple values,
filesystem type wasn't really checked and replacements
were not ensured, so saving articles like "Portal:Stuff"
failed on VFAT devices as ':' wasn't replaced.
After the awesome work made by @ezdiy:
- Remove empty dir from release zip
- Remove misc files (txt, md, html, gif) to prevent displaying them in PB library
- Do not asociate executable files (sh and py for the moment), just openable files
- Rename the font sample from html to template (to prevent wiping it during clean)
Only with CreDocuments (as no way currently to highlight links
in PDFs).
Tab or Shift-Tab to select next or previous links.
Press to follow (or show footnote in popup, and in there Press
to follow), back to go back.
(Not sure how and with what this check works and if
we still get such kind of items, but avoid a crash
when item2.pos0 exists but item1.pos0 does not.)
It's only needed by all_at_once, but we were skipping it if nothing or
only a single mode was enabled.
It lead to desync w/ the settings, or a crash.
Fix#6561
Includes:
- Revert "FB2: don't draw cover in scroll mode"
- (Upstream) FB2: fix coverpage drawing in scroll mode
- FB2 footnotes: only merge run-in when next is erm_final
- fb2.css: use OTF tabular-nums for footnote numbers
- Text: ignore ascii and unicode control chars
- Fix HR positionning when floats involved
- writeNodeEx(): minor tweaks
- OnTagClose(): add self_closing_tag parameter
- HTML format detection: accept HTML5 doctype
- HTML parser: rework Lib.ru specific handling
- HTML parser: new more conforming implementation
- HTML parser: ensure foster parenting inside tables
Also includes:
- SDL: don't bypass X11 WM compositor
* Boundaries are now detected both when paging forward and backward.
Fixes potential false-negatives in the chapter boundary heuristic code, as mentioned in https://github.com/koreader/koreader/pull/6528#issuecomment-678610188 ;).
* Tweaked ReaderFooter to not repaint ReaderUI when it's unnecessary. (toggling/cycling it on a page with significant image content would flash the full screen).
* Only flash the first time a page w/ significant image content is shown. (Menus, among other things, could otherwise re-trip the flash).
* Add an option to *always* flash on chapter boundaries
* Optionally, in flash on chapter boundaries mode, also flash on the *second* page of a chapter.
(There's often a large river at the top of the page on a chapter's first page)
* In CRe, request a flashing update when there is significant image content on the page.
* Register all refresh rate related options in Dispatcher, making them available in Gestures & Profiles.
* bump crengine: reworked hanging punctuation
* move setting management from ReaderTypeset to ReaderTypography
And fix initial handling of defaults being loaded as true/false
but needing to be saved as 1/0.
* fix luacheck
* Revamped most actions that require an internet connection to a new/fixed backend that allows forwarding the initial action and running it automatically once connected. (i.e., it'll allow you to set "Action when Wi-Fi is off" to "turn_on", and whatch stuff connect and do what you wanted automatically without having to re-click anywhere instead of showing you a Wi-Fi prompt and then not doing anything without any other feedback).
* Speaking of, fixed the "turn_on" beforeWifi action to, well, actually work. It's no longer marked as experimental.
* Consistently use "Wi-Fi" everywhere.
* On Kobo/Cervantes/Sony, implemented a "Kill Wi-Fi connection when inactive" system that will automatically disconnect from Wi-Fi after sustained *network* inactivity (i.e., you can keep reading, it'll eventually turn off on its own). This should be smart and flexible enough not to murder Wi-Fi while you need it, while still not keeping it uselessly on and murdering your battery.
(i.e., enable that + turn Wi-Fi on when off and enjoy never having to bother about Wi-Fi ever again).
* Made sending `NetworkConnected` / `NetworkDisconnected` events consistent (they were only being sent... sometimes, which made relying on 'em somewhat problematic).
* restoreWifiAsync is now only run when really needed (i.e., we no longer stomp on an existing working connection just for the hell of it).
* We no longer attempt to kill a bogus non-existent Wi-Fi connection when going to suspend, we only do it when it's actually needed.
* Every method of enabling Wi-Fi will now properly tear down Wi-Fi on failure, instead of leaving it in an undefined state.
* Fixed an issue in the fancy crash screen on Kobo/reMarkable that could sometime lead to the log excerpt being missing.
* Worked-around a number of sneaky issues related to low-level Wi-Fi/DHCP/DNS handling on Kobo (see the lengthy comments [below](https://github.com/koreader/koreader/pull/6424#issuecomment-663881059) for details). Fix#6421
Incidentally, this should also fix the inconsistencies experienced re: Wi-Fi behavior in Nickel when toggling between KOReader and Nickel (use NM/KFMon, and run a current FW for best results).
* For developers, this involves various cleanups around NetworkMgr and NetworkListener. Documentation is in-line, above the concerned functions.
It doesn't do so for the FM, so the inconsistency is confusing.
Plus, if you're actively using sticky rotation, saved rotations are
ignored anyway.
Re #6420
use `device` `filemanager` `rolling` and `paging` sections to organize the
dispatcher menu and allow the user to know when the action will apply
add events from ReaderGesture
allow profiles in FM
* Allow locking the gyro to the current screen mode (i.e., orientation).
* Tweak the "sticky rota" option to work both ways
* More rotation constant usage instead of magic numbers
* landscape FM / Refactor rotation
refactor and simplify the orientation handling code. the user generally cares about the rotation (what direction the device is facing) and not about if koreader is displaying in portrait or landscape mode
* bump base
update luasocket, libjpeg-turbo, curl
add logging to evernote-sdk-lua
update framebuffer for proper rotation
Was correctly done when jumping bookmarks via the Bookmarks
menu and the SkimTo widget, but not from gestures.
Also prevent fillToc() on each page turn when book has no TOC.
joins calibre metadata search and calibre wireless connections into a single plugin
search metadata changes:
- search directly into calibre metadata files.
- search can be performed on more than one library (configurable from a menu)
- device scans now find all calibre libraries under a given root
- search options can be configured from a menu. (case sensitive, find by title, author and path)
- removed legacy global variables.
- *option* to search from the reader
- *option* to generate a cache of books for faster searches.
calibre wireless connection changes:
- keep track of books in a library (includes prunning books from calibre metadata if the file was deleted locally)
- remove files on device from calibre
- support password protected connections
- FM integration: if we're in the inbox dir it will be updated each time a book is added or deleted.
- disconnect when requested by calibre, available on newer calibre versions (+4.17)
- remove unused opcodes.
- better report of client name, version and device id
- free disk space checks for all calibre versions
- bump supported extensions to match what KOReader can handle. Users can override this with their own list of extensions (or from calibre, by configuring the wireless device).
* Fix HW dithered partial refreshes sometimes behaving as if the refreshed
content had moved a few pixels to the side...
Probably a kernel issue with the alignment fixup in the EPDC?
* Get rid of the legacy coordinates fixup
It shouldn't be necessary anymore.
And I'd rather fix the root cause, anyway.
* Bump base
(https://github.com/koreader/koreader-base/pull/1116)
* Missed a few DIVs in #6224
hius07
poire-z
yparitcher
zwim
Frans de Jonge
Dylan Garrett
Aleksa Sarai
NiLuJe
git-help-eng
Brian Hughes
Jason Benwell
mergen3107
gbyl
Toromtomtom
Anton
zwim
Cali-Co
Markismus
Galunid
John Beard
Martín Fernández
jperon
Jellby
ezdiy
georgeto
smartscripts-nl
Strana (eng: Page)
tjader