* Don't override hw_intensity when we start with the FL off
* And add an insane workaround to make the first toggle behave sanely in this case.
* And also handle the sneakier case where the first toggle happening would not be manual, but triggered by a suspend/resume cycle.
* Make hasNaturalLight* caps safe to call without a device check. (fix#4919)
Make it clear that it's expecting the NTX implementation, though.
* Don't turn the FL on on resume if it was off on suspend
* Make sure turnOn/turnOff actually updates hw_intensity in the process where it matters, instead of just in a short lived fork ;). (fix#4923)
Extend the FR and ES keyboards from the EN one, and
just tweak what has to be changed.
This will allow them to stay in sync with the EN keyboard's
recent and futur developments of key popups.
Also make the FR keyboard a bit more AZERTY.
Going with partial ends up being problematic on REAGL devices in a
number of different ways.
On Kindle (at least pre EPDCv2), it's slightly flickery because of the
whitespace and the boldface.
On Kobo, it's slow when anything else tries to queue an update (i.e.,
flashing the chevrons).
Which is a non-issue on the Forma because then it's fast when using
pageturns to navigate, but, still :D.
The obvious downside is we lose the automatic flash after n refresh,
which is potentially annoying on older, non-reagl devices.
It's not really on issue on REAGL devices, especially on EPDCv2.
Eth (ð) is an important letter for people who like Old English (me), and for IPA.
Ď/ď is Czech/Slovak.
Đ/đ is sometimes an alternative rendering of ð, maybe because you could type it on a traditional typewriter. It's also Slavic and something Vietnamese.
Delta is an often-used Greek letter.
Companion PR to https://github.com/koreader/koreader-base/pull/884
* Basically flags devices known to be stable when using PxP inversion.
* Plus, random fix for #4870 ;).
* A few FrontLight tweaks & cleanups on Kobo:
* Moved the Kobo-specific startup status insanity to Kobo-specific init
* Made turnOff/turnOn frontlight do a smooth ramp down/up
* On Kobo, use turnOff/turnOn for suspend/resume, to get that smooth toggle
* On Kobo, for NaturalLight w/ a mixer, only set warmth for setWarmth, and only set Brightness for setBrightness, otherwise, it tried to set both with not in-sync values, which made the FL widget jittery.
Adds configuration to the top corners as well as the additional gestures hold and two-finger tap.
Deprecates `DTAP_ZONE_FLIPPING` and `DTAP_ZONE_BOOKMARK`.
Fixes#4877.
- Removed "Swipe to follow first link on page" menu item and
handling code, as it feels not really as practical as
"Swipe to follow nearest link".
- Removed recently added "External link action", as we can
just always present a popup with the url and the available
actions.
- Generic handling of these actions in onGoToExternalLink(),
so they are proposed on the Wikipedia lookup popup too.
- Allow external link on PDF documents (previously, only
internal links were handled).
- Have "Ignore external links on tap" available on all
document types.
- Added "Ignore external links on swipe" (default to true,
the current behaviour).
- Added multiswipe gesture "Follow nearest internal link"
(the existing "Follow nearest link" now follows the
nearest external or internal link)
- ButtonDialogTitle: added an option to look a bit more
alike ConfirmBoxes.
- Footnote popups: fix link unhighlight when tap on external link.
Otherwise it's:
1. Too small on virtually all devices due to a lack of scaling.
2. Unusably small by default.
It's currently scaled by the callers (dictquicklookup & footnotewidget) based on other properties, but you shouldn't have to change it from the default just to get something usable. ;-)
It was missing some ordering hints to have it always
precede taps to change page.
(Somehow noticed only when we reached > 32 gestures
registered, which may have introduced some shuffling,
while previously the addition order was somehow
preserved...)
Have the code pre-invert some images when in night mode,
so they get inverted back to normal by night mode.
This will allow images to be displayed normally in
the following contexts:
- images in credocument pages
- long-press on images in credocument viewed in ImageViewer
- cover thumbnails in File browser and History
- full size covers when viewed in ImageViewer
- images in Wikipedia lookup results
* Add a toggle to disable the C blitter in the Dev menu (depends on https://github.com/koreader/koreader-base/pull/882) (never shown if the JIT is disabled, grayed out if the C blitter is not installed)
* Fix a few sizeUtf8Text call sites that were doing a nil check in order to account for the new return type.
* Tweak statusbar handling to avoid spurious sizeUtf8Text warnings when it's hidden, and unify its behavior between being hidden via toggle, and hidden on book open (at least when all-at-once is not enabled).
* c.f., https://github.com/koreader/koreader-base/pull/882 (Android, PB, RGB32 & Legacy Kindle regression fixes).
When toggling between scroll and page modes multiple
times, _gotoXPointer() could find the xpointer to be
already positionned and avoid calling setDirty() (so
not enqueuing a whole screen refresh). But the page
will be slightly moved to account for the top margin
disappearing. We need that whole screen refresh in
such cases, so ensure one is enqueued.
I overlooked this until I noticed it on Transifex today.
See https://github.com/koreader/koreader/pull/4791#discussion_r265546245
Also changing the internal name because for something that's only been in one or two nightlies there's no point in prematurely introducing legacy settings.
Code removed from ReaderGesture and put into BookInfo where
it belongs, so we can just use Events.
Also convert description to plain text to not show HTML tags.
It was doing a full document load to get the cover. It now does
the faster "only metadata" load.
Also move the trick of setting a default font in CreDocument, so
that all callers of document:loadDocument(false) benefit from it.
Prevent crash when no cover image is available (even if the cache
says it has one, the file may have been updated and doesn't have
it anymore).
This internal ButtonProgressWidget widget was behaving
differently from all others (OptionTextItem, OptionIconItem
and ToggleSwitch) by duplicating some code from
ConfigDialog:onConfigChoose() instead of calling it directly.
While making it similar to others, I noticed that onConfigChoose()
did a full repaint, which was necessary for some settings to
be applied (ie: Contrast).
On CreDocument, this full repaint may cause some double drawing
on config changes (ie: Margins, drawing once after margin changes,
and then re-positionning to previous xpointer).
So, make the need for full repaint a condition on KoptOptions.
Remove gray underline on text items (font size items).
Adjust gray color of ButtonProgressWidget to match the
one of ToggleSwitch (just need to invert it, as it's
used to select button, which cause this color to be
inverted).
* Fix the "Enable debug logging" checkbox so that it properly disables "Enable verbose debug logging" when it gets disabled
* Avoid asking ImageWidget for alpha-blending when it's not useful
* Make ImageWidget's alpha-blending code-path double-check that alpha-blending actually is needed, and avoid it if possible
* In the same vein, only do alpha-blending in textboxwidget when absolutely necessary
* Prefer color constants over the gray() method, ensuring that they're part of the eInk palette
Depends on https://github.com/koreader/koreader-base/pull/853Fix#4774
Similar to what's been added for 1 page view, but just turn
one page instead of switching to scroll mode when reaching
top left or bottom right corners.
Also make the selection start xpointer more accurate by
getting them in onHold(), instead of possibly too late in
onHoldPan() where we have already moved.
Adds a toggle switch in the Orientation bottom config menu to
allow showing 1 page or 2 pages when in landscape mode.
Previously, this was hardcoded to be in 2-pages modes only
in some circumstances (device resolution + user dpi).
No need to use current page and xpointers. We can use
'pos', in both scroll and page modes, as it is always
accurate to show the y of the current view.
When following a footnote popup, the highlighted link
delayed clearing (when the link is hidden by the popup)
would clear the margin marker on the target page too early.
Partially resolves#4747. Will enable switching Wi-Fi on/off in the menu and getting the network status. However, a new Wi-Fi session lasts ~100 seconds and then terminates automatically, apparently, to save the energy. I believe it can be prolonged by some networking activity. Also it is not shut down if the auto suspension is disabled.
The widget system doesn't really do multi-inheritance as well as it should at the moment. Instead of diving into the internals with release upcoming, this commit rewrites the shortcuts to behave better.
Also fixes an older bug in that changing the friendly name didn't actually do anything on first adding a shortcut.
Fixes#4763.
Also check for boxes in the 2nd page when in 2 page modes
(and fix onTapXPointerSavedHighlight(), too quickly cut
and pasted from drawXPointerSavedHighlight() recently).
Bump crengine and cre.cpp to correctly returns rect for
the first line of the 2nd page.
Marking a document as "finished" is important for Wallabag (see, among others, #4737, #4271). Also it's an obvious missing action.
Default to left, up. That keeps with the fullscreen dialog gestures generally go up. Also it was still unassigned.
* Remove separator on last item, see https://github.com/koreader/koreader/pull/4737#pullrequestreview-210948520
As suggested by @poire-z.
https://github.com/koreader/koreader/issues/4727#issuecomment-469668338
I wanted to make the gesture a `W`, but that's a bit too unwieldy. Instead there's the suggestion of a (backward) `W`.
The default gestures for wifi on and off are diagonal multiswipe half circles, like an turnable on/off knob.
* [UX] Gesture manager: add action - Exit and Restart
Also:
- add and show some separators in the gestures list
- fix gesture removal, and also remove it from settings
- add missing east west east
- add 6 remaining of the 8 knob 3/4 rotations
- add 3 easy knob full rotation (down + east + west)
* Show and allow removing gestures only in settings
* small optimisation (no loop needed on each multiswipe check)
* keep menu open and updated when recording multiswipe
* The Great 8bpp Experiment
Swap to 8bpp on Kobo, because we're 'effing grayscale, for pete's sake!
* Always swap to 8bpp, no matter the launch method.
Because it turned out that, even when restarting Nickel, we had to
restore the expected bitdepth ourselves, because pickel/Nickel didn't do
the job completely.
(I'm going to guess the grayscale flag wasn't getting flipped properly).
* Dither every non-transparent icon to the eInk palette
* Make sure hasBGRFrameBuffer is only enabled when the Kobo fb actually is
@ 32bpp...
* Re-process badly grayscaled icons
* And re-grayscale that one w/ gamma correction so the squares show up
better.
* Allow the fbdepth switch to be disabled (in Developer settings).
Also, allow setting debug mode that way.
Also, forcibly disable verbose logging when disabling debug.
* Update setting name to piggyback on the existing check in reader.lua
* Update icons postprocessing info
Require is kept in memory, including the modifications made to it by MenuSorter. This can cause trouble when switching between the FileManager and Reader.
Fixes#4703.
[fix, UX] Fix slow keyboard when double tap not disabled
When double tap is not disabled (only ensured in ReaderRolling),
repeated key hits were slowed down by it. This ensures
Input widgets that temporarily overrides it to be disabled
are satisfied.
Multiswipes consisting of mixed straight and diagonal strokes are not dependable and too easy to mess up, but making them mutually exclusive seems to work out quite well.
Frans de Jonge
Martín Fernández
NiLuJe
poire-z
Galunid
tob1az
Qingping Hou