As suggested by @poire-z.
https://github.com/koreader/koreader/issues/4727#issuecomment-469668338
I wanted to make the gesture a `W`, but that's a bit too unwieldy. Instead there's the suggestion of a (backward) `W`.
The default gestures for wifi on and off are diagonal multiswipe half circles, like an turnable on/off knob.
* [UX] Gesture manager: add action - Exit and Restart
Also:
- add and show some separators in the gestures list
- fix gesture removal, and also remove it from settings
- add missing east west east
- add 6 remaining of the 8 knob 3/4 rotations
- add 3 easy knob full rotation (down + east + west)
* Show and allow removing gestures only in settings
* small optimisation (no loop needed on each multiswipe check)
* keep menu open and updated when recording multiswipe
* The Great 8bpp Experiment
Swap to 8bpp on Kobo, because we're 'effing grayscale, for pete's sake!
* Always swap to 8bpp, no matter the launch method.
Because it turned out that, even when restarting Nickel, we had to
restore the expected bitdepth ourselves, because pickel/Nickel didn't do
the job completely.
(I'm going to guess the grayscale flag wasn't getting flipped properly).
* Dither every non-transparent icon to the eInk palette
* Make sure hasBGRFrameBuffer is only enabled when the Kobo fb actually is
@ 32bpp...
* Re-process badly grayscaled icons
* And re-grayscale that one w/ gamma correction so the squares show up
better.
* Allow the fbdepth switch to be disabled (in Developer settings).
Also, allow setting debug mode that way.
Also, forcibly disable verbose logging when disabling debug.
* Update setting name to piggyback on the existing check in reader.lua
* Update icons postprocessing info
Require is kept in memory, including the modifications made to it by MenuSorter. This can cause trouble when switching between the FileManager and Reader.
Fixes#4703.
[fix, UX] Fix slow keyboard when double tap not disabled
When double tap is not disabled (only ensured in ReaderRolling),
repeated key hits were slowed down by it. This ensures
Input widgets that temporarily overrides it to be disabled
are satisfied.
Multiswipes consisting of mixed straight and diagonal strokes are not dependable and too easy to mess up, but making them mutually exclusive seems to work out quite well.
When multiswipes are enabled, this fixes the long-standing complaint that swiping to open the menu could unintentionally trigger some light panning. With the introduction of multiswipes, this problem has become more noticeable.
Before multiswipes and the gesture manager this was impractical on touch-only devices, but no more!
Also includes some minor textual clarifications on some of the settings.
By scrolling last page a little bit further.
Also fix a few other scroll mode issues, all related
to doc_height not being updated (eg, in the middle of
a book, and doubling the font size, one would not
be able to turn pages and read the 2nd half of the
book...)
The idea of looking for highlights 1 page before and after
was not working when you have multiple small pages, and
some scroll mode view was actually showing 3 or 4 pages.
So, rework that by using absolute positions when looking
for highlights present in the scrolled view.
Reported by @poire-z, cf. https://github.com/koreader/koreader/pull/4640#issuecomment-466544922
Apparently it's natural for me to make the second swipe slightly longer than the first, so I never noticed a logic issue. I did notice that it seemed slightly harder to make 4-swipe multiswipes than I expected it to be, but those are not necessarily easy gestures to make.
The problem was that I needed to prevent obviously silly gestures like west west west east. In ignoring such duplication, what I accidentally did was to ignore any further movement west after the first multiswipe direction was detected, meaning that the following swipe east could still end up as a relatively western movement overall.
By simply updating the current multiswipe slot in case of the same direction, both problems are prevented. We'll never get the same direction twice, and X moves over to where it's supposed to be on the left.
Avoids a use-after-free in mupdf.scaleBlitBuffer
Fixkoreader/koreader-base#821
Thanks for the hint, @poire-z ;).
* As @poire-z suggested, the original unscaled bb should probably be free'd.
The concept is quite simple: stick a file on the OTA server named
something like `koreader-appimage-latest-stable` (by analogy with
`koreader-cervantes-latest-stable.zsync`), which contains nothing
but a filename.
The difference with the zsync update is that the link is then launched
in the user's browser (AppImage) or DownloadManager (Android, not yet
implemented).
* Android hasOTAUpdate = no for the moment
* Double-checks that the connection was successful, and forcefully kills WiFi if it didn't, to avoid leaving stuff in an inconsistent state.
Should fix#2183
* Limit the turnOffWifi call to devices where it might make some sense to
do
When we rotate to show a screensaver, restore original rotation *before* closing the ScreenSaver window.
And ensure closing the ScreenSaver *always* triggers a full update, no
matter the settings.
Fix#4621
This basic initial implementation offers an introductory message
on the first multiswipe with the option to disable, as well as
a few example multiswipes.
Custom multiswipes can be added to `settings/multiswipes.lua`.
The basic idea is that you gain an infinite amount of extra gestures,
although in practice you're probably mostly limited to your 16 basic
two swipe combinations and maybe a few three swipe ones.
* Flash a white screen before showing a screensaver image, to prevent
ghosting.
* Really limit the white flash to full-screen images
* Limit that behavior to eInk screens
(Not that clear() is implemented anywhere else, but, still).
* On Kobo, kill WiFi on startup if we detect an inconsistent state...
Untested, not terribly pretty.
The other solution is to slow down the Wi-Fi meny by doing the same
check for the "Wi-Fi connection" checkbox as in the later wifi_status
one...
* Don't enable auto_restore_wifi by default
It's liable to silently murder batteries for no good reason, given that
we prompt to enable WiFi by default when needed, and we otherwise have
no actual need to keep WiFi on in the background.
re #2215 (in particular, this directly contradicts @houqp in
https://github.com/koreader/koreader/pull/2215#discussion_r74696133 ;)).
* Various FocusManager related tweaks to limit its usage to devices with a DPad, and prevent initial button highlights in Dialogs on devices where it makes no sense (i.e., those without a DPad. And even on DPad devices, I'm not even sure how we'd go about making one of those pop up anyway, because no Touch ;)!).
* One mysterious fix to text-only Buttons so that the flash_ui highlight always works, and always honors `FrameContainer`'s pill shape. (Before that, an unhighlight on a text button with a callback that didn't repaint anything [say, the find first/find last buttons in the Reader's search bar when you're already on the first/last match] would do a square black highlight, and a white pill-shaped unhighlight (leaving the black corners visible)).
The workaround makes *absolutely* no sense to me (as `self[1] -> self.frame`, AFAICT), but it works, and ensures all highlights/unhighlights are pill-shaped, so at least we're not doing maths for rounded corners for nothing ;).
* Enable HW dithering on supported devices (Clara HD, Forma; Oasis 2, PW4)
* FileManager and co. (where appropriate, i.e., when covers are shown)
* Book Status
* Reader, where appropriate:
* CRe: on pages whith image content (for over 7.5% of the screen area, should hopefully leave stuff like bullet points or small scene breaks alone).
* Other engines: on user-request (in the gear tab of the bottom menu), via the new "Dithering" knob (will only appear on supported devices).
* ScreenSaver
* ImageViewer
* Minimize repaints when flash_ui is enabled (by, almost everywhere, only repainting the flashing element, and not the toplevel window which hosts it).
(The first pass of this involved fixing a few Button instances whose show_parent was wrong, in particular, chevrons in the FM & TopMenu).
* Hunted down a few redundant repaints (unneeded setDirty("all") calls),
either by switching the widget to nil when only a refresh was needed, and not a repaint,
or by passing the appropritate widget to setDirty.
(Note to self: Enable *verbose* debugging to catch broken setDirty calls via its post guard).
There were also a few instances of 'em right behind a widget close.
* Don't repaint the underlying widget when initially showing TopMenu & ConfigDialog.
We unfortunately do need to do it when switching tabs, because of their variable heights.
* On Kobo, disabled the extra and completely useless full refresh before suspend/reboot/poweroff, as well as on resume. No more double refreshes!
* Fix another debug guard in Kobo sysfs_light
* Switch ImageWidget & ImageViewer mostly to "ui" updates, which will be better suited to image content pretty much everywhere, REAGL or not.
PS: (Almost 💯 commits! :D)
Panning to the bottom right corner (or top left corner) switches
to scroll mode and scroll the page forward (resp. backward) 1/3rd
of the screen.
One has to pan out of the corner to continue selection.
Panning again to that corner scrolls another 1/3rd of screen.
Page mode is restored when highlighting or dismissing the highlight
dialog, and a little marker is shown at where selection was started
so one does not get lost after all that scrolling and restoring.
Includes:
- Update french hyphenation pattern
- epub.css: update style for 'blockquote'
- DrawBuf: count nb of images and surface drawn
Adds Document:getDrawnImagesStatistics() to help deciding
if refresh with (possibly costly) dithering should be used
(on devices with HW dithering capabilities) with CreDocument:
when a page contains enough images to benefit from it.
Make this existing setting tunable with a menu item.
Also make the Page overlap and Highlight menus use a
checkbox, and their items grayed out when disabled.
Supported devices:
- Boyue T61 and *some* clones
- Boyue T62 and *some* clones
- Onyx C67
- Energy Sistem (which are in fact Boyue T62 clones). Was tested on a energy pro 4.
Others may work with the same controller too, but are disabled by default.
Requires https://github.com/koreader/koreader-base/pull/798
Requires https://github.com/koreader/android-luajit-launcher/pull/96Fixes#4373Fixes#1613 (supported devices will show the "full refresh rate" option under eink settings. Others won't)
Related #4228 (need to add support for this specific device to work)
Revert 9971eb85 and make multi-lines strings more readable.
(Multiline translatable strings extraction has been fixed
in koreader-misc tralua_xgettext.py.)
WiFi handling is handled asynchronously (deferred to lipc), so this is a
bit clunkier than on devices where we handle WiFi ourselves...
But, basically, try to honor the menu callback when toggling WiFi so
that the status gets updated in the menu.
Fix#4472
Includes:
- (Upstream) Harfbuzz light: fix rendering of fallback font
- CSS: adds support for 'orphans:' and 'widows:' properties
Adds some Style tweaks related to Widows and orphans.
* use product as device model
* print android version (codename + number) + api at launch
* exit the application properly
* fix fullscreen switching (and disable it on newer android versions)
* gettext: lower log level for message: cannot open translation file
* android common settings refactor
- Remove duplicated "Show footnote popup". Have the same setting
applied for Tap or 'Swipe to follow nearest link'.
- Make some menu items enabled or disabled depending on if they would
have some effect with the current state of other menu items, as
some kind of visual self-documentation of these dependancies.
- Add menu item to set the footnote popup font size, relative to
the book font size.
- SpinWidget: allow for showing some informative text
https://en.wikipedia.org/wiki/UTF-8#WTF-8
WTF-8 is a superset of UTF-8, that includes UTF-16 surrogates
in UTF-8 bytes (forbidden in well-formed UTF-8).
We may get UTF-8 with these from bad producers or converters.
We can get such chars in the text we get from Wikipedia API once
their (fully valid) JSON has been decoded by our lpeg-based JSON
decoder (which is a defect, hard to fix). (Our other pure-Lua json
decoder has no problem and do that correctly).
We might also find these WTF-8 in some dictionaries, so let's
support them.
Includes:
- EPUB: workaround ZIP files with corrupted central directories
- Supports book text encoded in WTF-8
- Harfbuzz kerning (full): fix possible wrong flags
- (Upstream) Adds new kerning method: Harfbuzz light, without ligatures
Adds Harfbuzz light kerning methods as the 3rd toggle.
Small fixes to widths computation for a more balanced layout.
Decreased min width of names (on the left) from 33% to 25%, to
allow more room for toggles on the right.
(May make things a little bit too stretched out with english,
but should help with other languages that use longer words to
name things than english.)
Also ignore disabled option names in the names width calculation
(noticable on the PDF right most config menu, where toggles were
uneededly too small)
When no height= provided, and the InfoMessage would overflow
screen height when some long message is provided, decrease the
font size until the widget fit.
Defines new function reconnectOrShowNetworkMenu(), which iterates over
available networks ordered by signal power, and check if we can connect
to saved SSIDs. If we can, then skip network list dialog.
* Fix the Touch input probe on Trilogy devices that depend on the touch_probe_ev_epoch_time quirk (fix#630)
* Expose a "Pageturn button inversion" feature in the Navigation menu (for all devices with keys) (fix#4446)
* Allow ignoring the accelerometer on the Forma (Screen > Ignore accelerometer rotation events; also available from the Gesture Manager) (fix#4451)
* Fix SleepCover handling on the Forma (fix#4457)
* Make isWifiOn a tiny bit more accurate (check the actual WiFi module instead of sdio_wifi_pwr)
* Move all flash related Screen options to the eInk submenu
Split the In-page footnotes tweak into 3 distinct ones,
mainly because I want the 3rd one with classic class names
to be disabled'able, while keeping the others, in case
these classic class names are not used for footnotes.
Also fix footnotes list-style-type in Wikipedia EPUBs,
which may have been wrong (but it was less noticable when
following page links because of the little black marker,
or showing them in popup footnotes where the number/letter
is not shown).
For a hidden setting already present, and used in
/apps/reader/modules/readerback.lua
Only shown, as the whole Navigation> submenu, on
devices with keys.
Adds 2 tweaks to allow displaying footnotes at the bottom of pages,
like it's done in some printed books. This will work only with
books with correctly specified footnotes with the adequate EPUB
attributes, and with Wikipedia EPUBs. But users may be able to
activate them for other books with some user style tweaks.
Adds a few tweaks to control the build of the alternative TOC.
With some user style tweaks, one may be able to build a usable
TOC for some badly formatted or converted books.
Also fixes 2 paragraphs tweaks.
Fix some conflict on Android where a swipe north from the
bottom to show system buttons (to exit or swith apps) would
cause a page change.
These gestures have never been available in ReaderPaging, so
it shouldn't be a big loss.
* On zsync delta failure, offer to retry OTA update with a full download
Fix#4429
* Bring the "this may take a while" popup back up before full DL
Don't rebuild the local tarball for a full dl, we're ignoring it anyway
;)
Co-Authored-By: NiLuJe <ninuje@gmail.com>
* Enforce a known rotation on startup, to make sure we handle touch input coordinates properly.
* Proper FrontLight warmth support (thanks to @cairnsh & @pazos in #4291)!
* Fix the PageTurn buttons mapping to match Nickel's defaults
* Properly remap PageTurn buttons depending on the current rotation.
* Actually enable the Mk.7 screen refresh codepath on *all* Mk.7 devices (I'd messed up the device check...).
* Full accelerometer handling (includes a touch of refactoring regarding orientation handling in general).
* Fix insidiously broken USBMS behavior in Nickel after we exit on FW >4.8.
Fix#4291Fix#3002
Split https/http code-path (as socket.http can adjust the Authorization/Host headers automatically)
Warn the user when the protocol differs from http/https
* Virtually the entire list that was originally on Sourceforge, except for some dictionaries with unclear or questionable licences.
* Without the Webster's duplicates. The GCIDE (GNU Collaborative International Dictionary of English), already included, is the extended version of it.
* Without Freelang. To "dissociate" dictionaries, the permission of individual authors has to be obtained.
Many thanks to @avsej who prepared it all.
See https://github.com/koreader/koreader/pull/3176#issuecomment-447085441
Update translator.lua to use a still working google translate API.
Add a method to show translations (main and alternates) in
a TextViewer.
Re-enable "Translate" button in text selection/highlight buttons
dialog.
Target language can be set with a manually added setting:
translator_target_language = "fr"
and will fallback to the UI language.
By adding a `sorting_hint` to a menu item, the program will put orphaned items in the relevant (sub)menu instead of in the first menu with a NEW prefix.
Fixes#4393.
* Implement isWifiOn on Kindle (fix#4380)
* Ensure frontlight intensity is properly restored on resume on Kindle. (fix #Fix #4392)
Only actually matters when the frontlight is *off*.
Includes:
- (Upstream) Fix dangerous compile warnings
- Fix max image height to prevent spurious page breaks
- Hide <epub:case> in <epub:switch>, show only <epub:default>
Adds a style tweak to show <epub:case> and hide <epub:default>
for the curious person.
We don't need that first-level menu to be short
as it contains no tweak itself (only the submenus
with toggable tweaks need to be kept shorter to
let room below to see the tweak effects).
bump crengine, which includes:
- Adds support for symbol fonts (local or embedded)
- Fix some issues when rendering text in constrained width
- Page splitting: fix possible missing blocks
- CSS: adds support for 'auto', ignore % for borders
- Fix right border drawing position
- Fix: adds missing properties in copystyle()
- Adds comments, erm_killed rendering method
- Adds getRenderedWidths(): get node min/max node content width
- Tables rendering: fixes and improvements
- getRenderedWidths: enable min_width to be a single CJK char
- Fix wrong text wrap avoid in some case
- epub.css: add style for 'blockquote'
- Fix rendering issue when line ends with an image
Adds a few style tweaks related to tables.
Enforce table width: 100% in Wikipedia EPUBs to keep
previous look, which feels better with the various kinds
of tables in Wikipedia pages.
Fix unit tests as juliet.epub (full of blockquotes), grew quite
a few pages with the epub.css update.
When Wifi is connected, the message "Connected." stays on the screen
waiting for the user feedback. The change sets reasonable timeout
for info message to disappear
When a main document is opened for displaying, some other
document openings (for getting metadata or cover image)
could affect the main document.
Split some code from CreDocument:init() into another new
method CreDocument:setupDefaultView(), that will only be
called by ReaderUI when opening the main document (and not
by these other openings like Book inforation, View cover...)
Also speed up some of these other openings (Search, Screensaver)
by using doc:loadDocument(false) to load only metadata and
avoid parsing the HTML.
Details in https://github.com/koreader/koreader/issues/4346#issuecomment-440036496
The font size items (Aa Aa ... Aa) and the align & column
items (for PDF) had a non-tapable spacing between them,
which could make hitting an item difficult.
This replaces this spacing by padding on each side of the item,
so a tap in between will always catch one item, for easier
selection.
* remove unused setting 'internal_storage_mount_point
use filemanagerutil.getDefaultDir() instead
https://github.com/koreader/koreader/blob/master/frontend/apps/filemanager/filemanagerutil.lua#L15
* more info about device frontlight/naturalLight capabilities
* make stock reader fonts available in KOReader
* remove restore-wifi-async leftovers
* wireless: fix wpa_supplicant configuration:
make it compatible w/ debian wheezy binaries
don't try to run enable-wifi.sh more than once
- ReaderConfig does not need to call again self:initGesListener() on
screen rotation/resize, as it uses the TouchZone infrastructure
that deals itself with rotation. So, it was adding new gestures
that were overriding tap on footer and preventing it from working.
- ReaderFooter: fix refresh area (which was too small when toggling
from hidden to visible)
- ReaderToc: fix crash when showing TOC in scroll mode after rotation
- Menu: fix crash when no onReturn defined (could happen when tap on
bottom left corner when showing an empty TOC)
bump crengine, which includes:
- Avoid uneeded re-rendering on load when with full status bar
- Update french hyphenation pattern
- Fix border-collapse on table cells in some cases
- Fix line-height inheritance when no unit
- Fix: don't ignore space following an image
- Fix: ignore occasional space at start of line
- Fix possible segfault when viewing HTML
- Fix and extend support of vertical-align
Also add a style tweak to middle align images with text, which
may make some text with inline icons and such nicer (depending
on images sizes and selected Zoom/DPI).
Avoid forceRePaint() (and showing the full page without any
widget) between closing the "Looking up..." info message and
displaying the Dictionary result window, as it's not really
needed (I must have added it for symmetry with
ReaderDictionary:showLookupInfo() where it is needed.)
This avoids some occasional refresh competition glitches.
Also trim spaces at start or end of selection (can't hurt),
and replaced ugly string.gsub(text) with text:gsub().
Follow up to fa0117bb (#4268), to make things a bit clearer:
Only ReaderRolling get the 'SetStatusLine' event, and tells
crengine about the change, and then send the 'UpdatePos' event.
ReaderFooter now just gets a :setVisible() method.
Now, all the code that calls a self.ui.document:set* method, that
most probably triggers a full re-rendering by crengine, do signal
'UpdatePos' immediately after. This event signals that all page
number, pages count, positions... are no more valid and must be
queried or computed again.
This could also be used if we ever want to cache Page Links or
Screen Boxes: this event will have us dropped these caches.
Addition of WebDav to the CloudStorage. The functionality is the same as with Dropbox and FTP, it is possible to browse the files on the server and download a copy.
Tested with:
NextCloud
HubZilla
Default setting set by holding on the bottom config buttons
for "View mode" (scroll/page) and "Progress bar" (full/mini)
were not used.
Also, when switching Progress bar from 'full' to 'mini',
show the mini bar again.
When a link is covered by the footnote widget, we highlight it
again when closing the footnote, and schedule an unhighlight
0.5s later.
When we tap on another footnote link, this was happening too
but the unhighlight unhighlighted all, including the new
footnote link.
This disable the former when the latter happens.
Take full/top status bar's height into account when
computing coordinates.
Also wrap getPageMargins() in CreDocument, so we
don't use cre.cpp _document directly anywhere else.
Adds new options to the Links> submenu, for now only
available and used with CRE documents.
- Allow larger tap area around links
- Ignore external links
- Show footnotes in popup
- Show more links as footnotes
(This last item is mostly for testing and loosening the
footnote detection algorithm, and see how it would behave
with glossary-like links and inter glossary terms links.)
Fix distance computation from gesture position to link by
using segments.
Code for detecting if a link is a footnote is in cre.cpp, and
tweakable a bit with flags in ReaderLink:showAsFoonotePopup().
Footnotes HTML content is displayed by a new FootnoteWidget,
which uses MuPDF for its rendering.
From it, swipe south or tap outside to close, swipe to the left
to follow the original link and jump to the footnote location
in the book.
Also fix tap on highlights after the recent change to use segments
for displaying: use segments also when checking taps.
* Pocketbook Color Lux detection
* fix rotation for Pocketbook Color Lux
* deal with 24bit RGB framebuffer that are reported as 8bit
* use default DPI for Pocketbook Color Lux
* bump base
Manager supports separate gestures for the file manager and the reader. Gestures from the manager have a higher priority than built-in gestures.
Settings available in Gear -> Device -> Gesture manager
Frans de Jonge
Martín Fernández
poire-z
Qingping Hou
NiLuJe
Galunid
Sergey Avseyev
Viktor Sokyrko
endofline
jperon
patrick-tang
Hzj_jie
wsotest
mbab
frio
xelxebar
Yann Muller
onde2rock
Robert
Thomas Rebele